Engine Service

Adjusts the timing chain through the camshaft adjuster Aluminum die-cast construction 24mm hex drive end Services various Audi models from '05 &am...

Services Ford and Volvo 1.5L & 1.6L Engines Forged construction Use with CTA #2880 Compare to Ford Factory Tool: #303-1097 Click HERE for in...

Used to set camshaft timing Includes 4 blocks & 2 locking fixtures for setting camshaft timing Engines: M60, M62 & M62TU Packed in blow-mo...

Timing tool set for BMW N63 & S63 V8 engines Includes necessary alignment fixtures Components: 2893X01 - TDC Lock Pin 2893X02 - Alignment Bar...

Aligns and secures camshafts when setting timing 3.0L, 3.2L V6 4v Engines Compare to VW/Audi factory tool #T40133 Applications ...

Locks crankshaft in place during timing belt replacement on oval pulley gear #038105263H found on: 2005-2007 Volkswagen Jetta 1.9L TDI with Engin...

Secures Bosch diesel injection pump sprocket from rotating during R & R of cam shaft drive belt on '99 & up TDI engines. Also works on ...

Mercedes Benz 36mm Fan Clutch Wrench Ford & GM vehicles with a 36mm fan clutch nut Land Rover (Discovery 2) Services most models from mid-9...

Mercedes Benz 40mm Holding Tool Services most models from mid-90's and up High Polish Finish

For adjusting camshaft position during cylinder head reassembly or setting injection pump Works on VW Diesel with ALH engines Plus Audi diesel ...

For alignment of the cam and crankshafts Allows correct installation of the camshafts with the cam cover Compare to Volvo Factory Tools: #9995451,...

Properly aligns and locks camshaft in TDC position when adjusting or checking timing or replacing camshaft or timing chain on N62, N62TU & N73...

Special 50mm long bolt with washer for loosening V-Belt tightening device Used on 2.0L Turbo FSI engines VW / Audi Timing Belt Tool Applicat...

Essential kit when replacing timing belts Includes 3 single-arm jaws, 3 double-arm jaws (17, 23, 25mm openings), yoke and center screw Works on...

  Locks and holds camshafts when adjusting the left and right camshafts Services: Audi A4, A6 & A8 (2001 – 2008) with AVK engine Includes hold...

Holds the chain and tensioner in position during assembly and disassembly on many VW & Audi vehicles. Compare to VW/Audi Factory Tool #3366 ...

For alignment of the cam and crankshafts Enables correct installation of the camshaft with the cam cover Applications Make Model Year V...

Keeps the crankshaft pulley from turning when changing the timing belt and/or crankshaft seal Designed to withstand the torque specs for the crank...

Holds camshaft pulley OAL: 19-Inch / 48cm 60mm Compare to Subaru Factory Tool #499207400 & #499207400-A Applications Make Model Year...

Includes Yoke 61/2” (165mm) center screw Pointed adapter 4 sets of bolts 3/8”- 16 x 4” 3/8” – 24 x 2” 5/16” – 18 x 2” M8...

Adjusts timing belts that have idler pulleys with pin holes Pins in offset head of tool engage the pulley to rotate around the retaining bolt D...

Adjustable handle position allows the tension to be applied directly to the idler roller even with limited access Pins on tool engage the offset...

6 tools for belt tensioning or adjusting Includes: Open Stock 2766: Short Wrench 2767: Long Wrench/Short Offset 2768: Long Wrench/Long Offset 276...

Use to remove and install Fan Clutch Assemblies when replacing Water Pumps or doing other Engine Services Use two wrenches together: one for h...

Use to remove and install Fan Clutch Assemblies when replacing Water Pumps or doing other Engine Services Size: 36 x 48mm ( 17/8" x 17/16" ) Appli...

Removes springs and valve guide seals without removing cylinder head. Used by removing rocker and fastening tool to stud with nut, then use an a...

Application: Tractors/Diesel Trucks Depth: 6" (150mm) Range: 60 - 175mm Features ratchet mechanism with square drive tools to a...

Use for turning the flywheel crank on Paccar engines Services 2011-2016 Kenworth and Peterbilt T880 models with Paccar MX, MX PMCI-2, MX-...

10mm Triple-Square "XZN" 12-Point Service most VW & Audi headbolts 150mm long wrenches Use with 1/2" square drive tools Ma...

Applications: Mack E7 and Cat 3208 Dimensions: 8 Splines x 1.725”(43.815mm) Compare to Factory Tool #0508477 1/2" Square Drive Application Detail...

Tool is used for Compressing valve springs on the 3.0L without having to remove the head Applications: Fusion, Milan, MKZ, Escape, Mariner, Five H...

Primarily services Ford 4.0L SOHC V6's And some late model 4.6L V8's 3 pieces with detachable end to enable access in tight areas Compare to Ford ...

Designed for BMW cylinder head bolts 1/2" square drive bits are extra long (OAL 200mm) Allows access to reach down and remove stubborn cylinder he...

Designed for Honda, some Toyota's, etc. (Modifications may be required for applications other than Honda) Thread inserts are longer for maximum en...

Removes stubborn pins from cylinder head 85mm OAL for access in tight areas where slide hammers wont fit Services Benz M102, M110, M115, M116, M11...

Valve spring compressor for Jeep, Dodge & Chrysler 3.7L & 4.7L engines Services DR, HB, KA, KJ, KK & ND systems 3/8" drive Applicatio...