Engine Service

Services free-wheel pulleys found on VW, Audi, Volvo, Mercedes Benz, Porsche, etc. with Bosch Alternators Features two-part design - 33 spline end...

Used for adjusting the camshafts when performing service on the timing system Also found in CTA No. 7066 Volvo Camshaft Alignment Kit Compare to V...

Used to counter-hold the crankshaft pulley to release and tighten center bolt Compare to Volvo Factory Tool: #999 5433 Application Details ...

For '98 & earlier 2.5L 5 cyl. Volvos w/o CVVT Holds the camshaft in place during the timing belt replacement Made from 3/8" anodized metal pla...

Spring-loaded design for setting pins in variable positions Grooved pins hold the camshaft pulley stationary while loosening and tightening the ce...

Services belts on Volvo & BMW Heavy-duty long bar with T60 Torx Bit on one end & T50 Torx Bit on other end, plus 16mm x 12-point opening b...

Fits into the idler pulley and turns it to release tension for replacement of the serpentine belt 3/4" square head Applications 850 (1993-1997)...

Services Volvo 850, 940, 940SE, 960, S60, S70, S80, V70, V70XC, XC70 & XC90 Compare to Volvo Factory tool #9995371 Because threads are very fi...

Holds the engine when replacing the timing belt Aligning the camshaft and crankshaft position Services vehicles with the "VEA" 2.0L turbocharged a...

For alignment of the cam and crankshafts Enables correct installation of the camshaft with the cam cover Applications Make Model Year V...

Quickly and easily install stretch belts found on many late model vehicles These drive systems do not have a tensioner and require the proper inst...

Designed for installing lower seals on Volvo VEP 4-cylinder direct injection injectors Ensures proper seal positioning to maintain injector functi...

Designed for installing upper seals on Volvo VEP 4-cylinder direct injection injectors Ensures proper seal compression to prevent fuel or vacuum l...

Designed for Volvo VEP gasoline 4-cylinder direct injection engines Removes stuck injectors without damaging surrounding components Heavy-duty con...

Locks and hold camshaft gears in place during timing or service procedures Ensures accurate alignment and prevents camshaft movement during repair...

Designed to rotate the crankshaft Services Volvo 6L & 12L engines, including D9A, D12 & D16C models Corrosion-resistant and durable steel ...

Designed to rotate the crankshaft on Volvo Penta engines Corrosion-resistant and durable steel construction for strength and durability Applicatio...

Used for supporting the engine when performing service on the timing system Also found in CTA No. 7066 Volvo Camshaft Alignment Kit Compare to Vol...

Kit has all the necessary components required to perform a full timing service Used for Aligning the engine camshaft position Used for Holding the...

For alignment on 2010 & up Ford 2.0L engines Cam locking plate with special milled thickness Retaining bolt included Compare to Ford Factory T...

Kit includes timing and seal service tools for services on the 1.6L Ecoboost engine. Components included in kit: #2822 - Ford Cam Locking Plate ...

Services Ford and Volvo 1.5L & 1.6L Engines Forged construction Use with CTA #2880 Compare to Ford Factory Tool: #303-1097 Click HERE for in...

Keeps the crankshaft pulley from turning when changing the timing belt and/or crankshaft seal Designed to withstand the torque specs for the crank...

Applications: Mack E7 and Cat 3208 Dimensions: 8 Splines x 1.725”(43.815mm) Compare to Factory Tool #0508477 1/2" Square Drive Application Detail...