Engine Service

Installs crankshaft seal Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018...

Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011-2019 For Rear Remover - See CTA 7315 Compare to Ford Factory Tool ...

Kit provides tools required to remove and install all crankshaft seals on a 6.7L Power Stroke engines Services Ford Super Duty F-250, F-350, F-450...

Timing set for Ford 2.0L & 2.3L EcoBoost engine Set includes: 2880X04 - T.D.C. Crank Timing Pin 1026L - Camshaft Alignment Tool 1804 - Crank...

Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 & 2019 Compare to Fo...

Removes later style central valve on BMW Vanos Hubs and Ford VCTs Services BMW/MINI B36 (1.5L), B38 (1.2L & 1.5L), B48 (2.0L), B58 (3.0L) &...

Holds camshafts in position during timing belt replacement Services many makes, including Fiat, Ford, Honda, Hyundai, Mazda, Mitsubishi, Nissan, S...

Kit contains everything required to perform timing service on 4.6L, 5.4L and 6.8L Ford Triton engines This comprehensive kit includes the followin...

Use for easily removing stuck injectors Perfectly weighted slide hammer for injector extraction Services: Ford EcoBoost GDI engines (1.0L, 2.0L &a...

Used for holding the flywheel on Ford 1.5L & 1.6L engines Applications: Escape, Fiesta, Fusion & Transit Connect Compare to Factory Tool #...

Tool is used for holding the Crankshaft Damper on 2005-2011 Ford 2.0L, 2.3L & 2.5L engines Applications: Fusion, Focus, Transit, Milan, MKZ, E...

Includes camshaft holding fixtures & chain tensioner hold down pin Services: Ford EcoBoost V6 engines Engine: 2.7L, 3.5L & 3.7L V6 Compon...

Removes and installs water pump pulley on Ford, Lincoln and Mercury 3.0L DOHC engines Includes: Forcing screw with shaft protector Pulley removal...

Timing set for Ford 1.6L N/A (Naturally Aspirated) engine plus the 1.5L/1.6L Ecoboost (Turbocharged) Engines Set Includes: T.D.C. Crank Timing Pi...

The crank position sensor (CPS) alignment block used for servicing the alignment of the Crank Sensor on many versions of the 2.0L & 2.3L Ford ...

The inner hex walls of the socket are machined EXTRA-DEEP for clearance Clears the sensor connection bracket for easy removal of the Ford Fuel / E...

Services Ford & Mazda 2.0L and 2.3L twin cam turbo engines Including 1.8L Duratec-HE (MI4), 1.8L Duratec-SCi (MI4), 2.0L Duratec-HE (MI4) Ford...

Counter-weighted design for high torque applications, including: Subaru, Toyota, Isuzu, Kia, Nissan, BMW, Dodge, Ford & Jeep OAL: 89mm Use...

17mm by 12-point flare nut and deep crowfoot socket allows technician to remove hard-to-reach injector lines on Ford 6.7L Power Stroke application...

Use this camshaft alignment tool on the upgraded 3.5L Ford EcoBoost engine Applications: Expedition (2018-2019), F-150 (2017-2019), Ford G...

Comprehensive tool kit services Ford, Lincoln, Land Rover & Mazda 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L & 3.0L engines Used on EcoBoost, Dura...

A must for removing and installing serpentine belts with spring-loaded idler pulleys 23” long slender design provides proper reach and prevents ...

Services Ford EcoBoost B-Max 1.6L engines Use in conjunction with #1026 Comparable to Ford Factory Tool 303-1550 Applications Make Model Engin...

Counter-weighted design for high torque applications, including: 21mm hex pulley damper bolts on Chevy, Chrysler, Dodge, Ford, GM, Jeep and Mazd...

140mm long wrench with T60 Torx® end features machined shaft to allow proper clearance to service Dual Mass Flywheel Mount Bolts, as they are off-...

Removes and installs press-on type belt driven accessory pulleys on pumps with 3/8”-16 threaded shafts Interchangeable components allow service on...

Kit contains everything required to perform timing service on 3.5L EcoBoost engines It also services some 3.5L Duratec (non-turbo), 2.7L & 3.7...

One tool locks camshaft and the other locks the timing chain Services Ford 4.6L, 5.4L & 6.8L 3V engines Also includes #7639 Ford Valve Spring ...

One tool locks camshaft and the other locks the timing chain Services Ford 4.6L, 5.4L & 6.8L 3V engines Comparable to Ford Factory Tools #5676...

Used to counter-hold the crankshaft pulley to release and tighten center bolt Compare to Volvo Factory Tool: #999 5433 Application Details ...

Spring-loaded design for setting pins in variable positions Grooved pins hold the camshaft pulley stationary while loosening and tightening the ce...

Set of three wedges designed to hold/wedge while performing timing service Use on Sigma platform engines, 1.4L & 1.6L Duratec 16V engines from...

For locking and positioning camshafts, crankshafts & injection pump sprockets when replacing timing belts or chains Includes setting gauge and...

Quickly and easily install stretch belts found on many late model vehicles These drive systems do not have a tensioner and require the proper inst...

Services Ford vehicles w/ 4.6L, 5.4L & 6.8L 3V engine Instructions 1. Install 2-leg main body below the camshaft and above the engine block ...

Compresses valve springs without having to remove the head. Forged construction with 3/8" square drive and built-in jaws Services 1991...