Pullers

Use for easily removing stuck injectors Perfectly weighted slide hammer for injector extraction Services: Ford EcoBoost GDI engines (1.0L, 2.0L &a...

Remove generator gears, bearings, bearing cones and similar parts where ordinary puller jaws will not reach Knife-like edges minimize damage to pa...

For use with CTA and other brands of Bearing Splitters when removing and installing Gears, Bearings, Shafts, Pulleys and other press-fit parts Cap...

Similar to #8075 but extra long 20-1/2" (521mm) for added reach Range: 1/2" to 2" (13mm to 50mm) Instructions Outside Pulling: Using the nuts an...

For inside pulling jobs, jaws will remove flywheel pilot and other bearings Range: 1/2" to 1-1/2" (13mm to 38mm) Replacement Jaws: 8070x06 - Stan...

Removes fly wheel pilot bearings and bushings up to 7-1/2" (190mm) long Better than slide hammer type when working in tight areas Better control f...

Remove generator gears, bearings, bearing cones and similar parts where ordinary puller jaws will not reach Knife-like edges minimize damage to pa...

Spread: 17" (432mm) Reach: 15" (381mm) Screw Length: 13" (330mm) Capacity: 13 tons (11.8MT) Instructions Hook the jaws to the desired gear, compo...

Set contains 4 bearing splitters and 1 V-Belt Pulley Pulling attachment tool Use to remove bearings, races, and seals from axles, wheel hubs, tran...

Removes Captured Bearings, Pilot Bearings, Bushings, etc. Positive grip design prevents slippage Better than jaw-type pullers Includes Puller, 11"...

For use in tight spaces 3.5" (90mm) long hardened jaws Adjust from 1.2" - 3.5" (30mm - 90mm) Thin Jaw Bearing Remover

Remove parts with tapped holes with 81/4" (210mm) yoke and 115/8" (300mm) long forcing screw Puller spreads from 2" to 7 3/4" (50mm to 200mm)

Pull parts with two tapped holes, including gears, fan pulleys, balancers, and cam gears Cross-arm is 1" (25mm) square and 5" (127mm) long, with 3...

Remove bearings, gears, bushings, seals, grease retainers, etc. Includes 4 jaw assemblies for internal/external and 2/3 jaw pulling 3 jaw range: 1...

Remove generator gears, bearings, bearing cones and similar parts where ordinary puller jaws will not reach Knife-like edges minimize damage to pa...

Remove generator gears, bearings, bearing cones and similar parts where ordinary puller jaws will not reach Knife-like edges minimize damage to pa...

Spread: 14" (356mm) Reach: 11" (279mm) Screw Length: 13" (330mm) Capacity: 13 tons (11.8MT) Instructions Hook the jaws to the desired gear, compo...

Spread: 11" (279mm) 28cm Reach: 9" (229mm) 23cm Screw Length: 9" (229mm) 23cm Capacity: 7 tons (6.4MT) 6364 Kg Instructions Hook the jaws to the ...

Spread: 10" (254mm) Reach: 5-1/2" (140mm) Screw Length: 9" (229mm) Capacity: 7 tons (6.4MT) Thread size: 9/16" (14mm) 20 Threads per inch Instruc...

Spread: 7" (178mm) Reach: 3-1/2" (89mm) Screw Length: 7" (178mm) Capacity: 5 tons (4.5MT) Thread size: 9/16" (14mm) 20 Threads per inch Instructi...

Spread: 8" (203mm) Reach: 5-1/2" (140mm) Screw Length: 7" (178mm) Capacity: 5 tons (4.5MT) Thread size: 9/16" (14mm) 20 Threads per inch Instruct...

Spread: 4" (102mm) Reach: 3-1/2" (89mm) Screw Length: 5" (127mm) Capacity: 2 tons (1.8MT) Thread size: 9/16" (14mm) 20 Threads per inch Instructi...

Spread: 15" (381mm) 38cm Reach: 15" (381mm) 38cm Screw Length: 13" (330mm) 33cm Capacity: 13 tons (11.8MT) 11820 Kg Instructions Hook the jaws to...

Spread: 12" (305mm) 30cm Reach: 11" (279mm) 28cm Screw Length: 13" (330mm) 33cm Capacity: 13 tons (11.8MT) 11820 Kg Instructions Hook the jaws to...

Spread: 10" (254mm) 25cm Reach: 9" (229mm) 23cm Screw Length: 9" (229mm) 23cm Capacity: 7 tons (6.4MT) 6364 Kg Instructions Hook the jaws to the ...

Spread: 9" (229mm) Reach: 5-1/2" (140mm) Screw Length: 9" (229mm) Capacity: 7 tons (6.4MT) Instructions Hook the jaws to the desired gear, compon...

Spread: 6" (152mm) Reach: 3-1/2" (89mm) Screw Length: 7" (178mm) Capacity: 5 tons (4.5MT) Instructions Hook the jaws to the desired gear, compone...

Spread: 7" (178mm) Reach: 5-1/2" (140mm) Screw Length: 7" (178mm) Capacity: 5 tons (4.5MT) Instructions Hook the jaws to the desired gear, compon...

Spread: 4" (101mm) Reach: 3-1/2" (89mm) Screw Length: 5" (127mm) Capacity: 2 tons (1.8MT) Instructions Hook the jaws to the desired gear, compone...

Two yoke sizes and 4 sets of side screws for all types of pulling jobs Use for Gears, Harmonic Balancers, Pulleys, Steering Wheels, and more! A...