Pressure Testers

Checks for leaky, sticky, or burnt valves, incorrect timing, accurate fuel pump vacuum and pressure and gas line leakage Gauge is calibrated from ...

Designed for the L5P Diesel engine with two tank caps One cap is located on the side of the tank (Vented) with right-hand threads The other is lo...

Features a 2-1/2-Inch / 63mm-diameter gauge with dual-calibration (0 - 1,000 PIS / 0 - 70kg/cm2) and side-release valve for multiple readings with...

4 adapters allow expansion of applications with CTA #3420 Fuel Injection Pressure Tester Kit CIS "Continuous Injection System" Services wider rang...

Designed for testing radiator system pressure on a wide-range of car, truck and agriculture-equipment applications, but not limited to Includes fo...

The turbo system leakage tester helps locate air leaks in the components by plugging the output side of the turbo and plugging the intake inlet Ai...

Test compression from lawn mowers to trucks Includes 8" (20cm) flex hose with 14 & 18mm threaded end, 10, 12 & 14mm long adapters, straigh...

15" flex hose allows access to all cylinders Side release valve permits multiple readings without removing tester Includes 14 & 18mm spark plu...

Accurately displays the air suspension pressure during service Helps detect leaks and/or irregularities in pressure throughout the air suspension...

Takes fuel pressure on vehicles with the Schrader-type test port on the fuel rail Features 3-1/2" (90mm) gauge with dual calibration (5-145 PSI / ...

15" flex hose allows access to all cylinders Side release valve permits multiple readings without removing tester Includes quick disconnect couple...

Applications: 2005+ 6.6 Duramax Diesel (10mm x 1.25) NOTE: these service the longer glow plugs with threads near mid-body of shaft OAL: 84.5mm Inj...

12mm Adapter

10mm Adapter

Locates leaks in turbo, intake and cooling system by plugging the output side of the turbo and intake side Services Heavy Duty class 6, 7 & 8 ...

Detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters Includes 3-1/2" (90mm) gauge with dual calibration (5-1...

12mm & 16mm threaded male ends fit spark plug ports on Ford Triton engines 8-1/2" / 22cm long flex hose for easy accessibility Works with #...

Measures the ability of an engine cylinder to hold compressed air using shop air pressure and supplements a compression tester Helps detect bad va...

Includes 2-1/2" (65mm) diameter with dual calibration (0-300 PSI / 0-21kg/cm²) 6' / 1.8m hose and SAE & Metric adapters ATTENTION - If ga...

Set is designed for the L5P Diesel engine with two tank caps One cap is located on the side of the tank (Vented) with right-hand threads The other...

Detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters Includes 3-1/2" (90mm) gauge with dual calibration (5-1...

Takes fuel pressure on vehicles with Schrader-type fittings Features: 31/2" gauge (5-145 PSI / 25-1000 kPa Range) 10" (25cm) long hose with quic...

Test vehicles with Multi-port and TBI systems Features 3-1/2" (90mm) gauge with dual calibration (5-145 PSI / 25-1,000 kPa) and 3 hose assemblies ...

Test vehicles with Multi-port fuel injection Features 3-1/2" (90mm) gauge with dual calibration (5-145 PSI / 25-1,000 kPa) Hose with quick disconn...

Upgrades CTA #3300 with the following adapters: Hyundai, Kia, Mitsubishi Style - 11mm Fuel Rail Adapter, 15mm Fuel Rail Adapter, 16mm Fuel Rail A...

For pressurizing Cooling Systems All metal construction 40mm x 2mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with other Press...

Kit includes all metal construction cooling system testing adapters for US & Asian market vehicles Use with CTA 7060 Radiator Pressure Tester ...

Applications: Ford 6.7L Powerstroke (8mm x 1.00) NOTE: Services late model 6.7L Powerstroke Diesel engine vehicles OAL: 58.20mm Injector end - thr...

Test Chrysler, Ford, GM (non-TBI), Japanese makes, Bosch AFC, MPC, Digijet/Digifant (non-CIS), plus others using Bendix-type fuel injection or a S...

Services most USA (except GM TBI) and Japanese systems Contains both large and small Schrader type test fittings, inline and end of line hose fi...

Allows for quick and easy seating in all spark plug holes 2-1/2" (64mm) diamteter gauge with dual calibration (0-300 PSI / 0-21kg/cm²) ATTENTION -...