Engine Service

Features vacuum cup & hardwood handle. Two working ends on tool for maximum coverage Large: 1-1/8" x 1-3/8"

Holds camshafts in position during timing belt replacement Services many makes, including Fiat, Ford, Honda, Hyundai, Mazda, Mitsubishi, Nissan, S...

Service head bolts on many VW & Audi models 1/2" square drive and 5-1/2" (14cm) long for deep-reach applications Ribe wrenches will also servi...

Replaces valve springs and valve stem oil seals without the need to remove the cylinder head Applications include, but not limited too: BMW, MI...

A must for removing and installing serpentine belts with spring-loaded idler pulleys 23” long slender design provides proper reach and prevents ...

Application: Passenger Cars Depth: 3" (75mm) Range: 60 - 175mm Features ratchet mechanism with square drive tools to adjust diamet...

Sockets are designed to install and remove Exhaust Gas Temperature sensors on cars & trucks without damaging connection wire, housing, sensor ...

Service head bolts on many VW, Audi, Jaguar & Land Rover 1/2" square drive and 4-1/4" (10.7cm) long for deep-reach applications Ribe wrenches ...

Service head bolts on many VWs and Audis 1/2" square drive and 4-1/4" (10.7cm) OAL long for deep-reach applications Ribe wrenches will also servic...

Spring-loaded design for setting pins in variable positions Grooved pins hold the camshaft pulley stationary while loosening and tightening the ce...

Features vacuum cup & hardwood handles Two working ends on each tool for maximum coverage Large: 1-1/8" x 1-3/8" Small: 5/8" x 13/16"

Spring-loaded clamping jaw positions and routes serpentine belts in tight areas without the belt slipping out of the tool Features long reach (261...

Application: Cars/Light Trucks Depth: 4" (100mm) Range: 53 - 175mm Features ratchet mechanism with square drive tools to adjust di...

Removes lifters that are not baked in or stuck without removing manifold Heat-treated teeth hook under groove OAL: 13" (33.5cm) Di...

Installs piston rings from 27/8 to 43/8" (73-111mm) Includes ratcheting pliers and 6 sizes of 11/2" wide compressor bands Works either parallel or...

Removes pressed-on 1 or 2 groove pulleys from alternators and power steering pumps without damage Fits both large and small pulleys found on old...

Removes and installs 22mm Oxygen Sensors that cannot be accessed with standard sockets 1/2" square drive & 1" hex drive OAL: 31/2”...

Used for servicing a wide range of 22mm oxygen sensors Included are 3 of the most popular versions of the 22mm socket: #2062 - Narrow Slot Oxygen...

Features vacuum cup & hardwood handles Two working ends on each tool for maximum coverage Small: 5/8" x 13/16"

Includes Yoke 61/2” (165mm) center screw Pointed adapter 4 sets of bolts 3/8”- 16 x 4” 3/8” – 24 x 2” 5/16” – 18 x 2” M8...

Removes springs and valve guide seals without removing cylinder head. Used by removing rocker and fastening tool to stud with nut, then use an a...

Application: Tractors/Diesel Trucks Depth: 6" (150mm) Range: 60 - 175mm Features ratchet mechanism with square drive tools to a...

Removes valve stem seals from overhead camshaft engines Special designed long reach jaws (3-14/" / 80mm) access recessed valves on 4 valve per c...

Use to remove and install the snap-ring on the long reverse piston and return spring, without removing the center shaft and clutch assembly from t...

Service head bolts on many VWs and Audis 1/2" square drive and 4-1/4" (10.7cm) long for deep-reach applications Ribe wrenches will also service...

2 Pc. Set: 2450x03 - size: .001-.003" (green) 2450x04 - size: .002-.006" (red) Measures clearances of engine rod and main bearings without expe...

The offset jaws will grip the valve spring in parallel compression with no need to remove the head. The jaws are extra long for use on high perf...

Use with the cylinder head still on the engine and in the car, or with the cylinder head removed Tool bolts to the head while the lever pivots fro...

Removes valve spring keepers and springs without removing the cylinder head Adjusts to fit springs on most cars Sliding "T" handle for close clear...

Designed to work in areas of difficult access using direct action compressor lever for better visibility Includes 2 valve spring adapter, fittin...

Removes and replaces valve keepers on all gas and diesel overhead valve engines, including motorcycle, marine and aircraft engines Tool is spring-...

Hardened steel tips allow for easy seal removal OAL: 10" (25cm)

For fast overhead valve repairs without removing cylinder head Fit 14 & 18mm spark plug holes Accepts 1/4" air hose coupling

Installs and removes piston rings without damaging Spring loaded Range: 2-1/2 - 6-1/4" (64 - 159mm)

SUPERSEDED BY CTA #4021 - Piston Ring Compressor 3" Application: Passenger Cars Depth: 31/2" (89mm) Range: 21/8 - 5" (54 - 127mm) Features ratchet...