Engine Service

Drill 2.5mm

Installs crankshaft seal Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018...

Milling Drill M10

Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011-2019 For Rear Remover - See CTA 7315 Compare to Ford Factory Tool ...

Milling Drill M8

Description: 10mm x 1/2" Square Drive w/ long shaft 12-Point wrench fit Toyota engine head bolts 10mm application include Toyota, Lexus & S...

Timing set for Ford 2.0L & 2.3L EcoBoost engine Set includes: 2880X04 - T.D.C. Crank Timing Pin 1026L - Camshaft Alignment Tool 1804 - Crank...

Kit provides tools required to remove and install all crankshaft seals on a 6.7L Power Stroke engines Services Ford Super Duty F-250, F-350, F-450...

Set of Two Guides

Cam Phaser & Timing Chain Locking / Holding Set for 3.6L Pentastar engines Services 2016 and newer Chrysler, Dodge & Jeep models Compare t...

Low-profile E20 Torx® socket removes and installs the low-profile bolts found on Nissan QR25's with automatic transmissions 1/2" drive ...

Use for replacing worn or damaged manual transmission mount The vulcanized rubber mount separates from the housing causing an increase of NVH duri...

Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 & 2019 Compare to Fo...

Kit contains everything required to perform timing service on 4.6L, 5.4L and 6.8L Ford Triton engines This comprehensive kit includes the followin...

Service head bolts on Jaguar & Land Rover 1/2" square drive and 4-1/4" (10.7cm) OAL long for deep-reach applications Ribe wrenches will also s...

Locks flywheel in place when removing harmonic balancer Use on 6.6L Duramax engine with Allison automatic transmission Instead of ha...

Features vacuum cup & hardwood handle. Two working ends on tool for maximum coverage Large: 1-1/8" x 1-3/8"

Use for locking the cams and crankshaft when replacing the timing chain and cylinder head gasket on the Porsche second gen V6 twin turbo engines A...

GM 1.6 & 1.8L 16V engine Designed to lock the camshafts in their required timing position Ensure proper alignment of the camshafts Packed in b...

2 Pc. 1/2" Square Drive Set 12-Point wrench fits Toyota engine head bolts Includes: 9290: 8mm Applications: Toyota, Lexus & Scion up to '06...

Special configuration with 6 internal slots to service timing belt tensioner Required when replacing the idler Use with 1/2” square or 7/8” hex dr...

Use for Installation and removal of head bolts on Subaru flat boxer engines Services: 1999-2020 Subaru Baja, Forester, Impreza, Legacy, O...

Removes and installs water pump pulley on Ford, Lincoln and Mercury 3.0L DOHC engines Includes: Forcing screw with shaft protector Pulley removal...

8mm 12-point bit end w/ 3/8" Square Drive Bit Holder Applications include, Toyota, Lexus & Scion up to '06 Note that hex shaft is marked 1...

Tap M6 x 100

Drill Support + Drill 2.5mm

Removes later style central valve on BMW Vanos Hubs and Ford VCTs Services BMW/MINI B36 (1.5L), B38 (1.2L & 1.5L), B48 (2.0L), B58 (3.0L) &...

Timing set for Ford 1.6L N/A (Naturally Aspirated) engine plus the 1.5L/1.6L Ecoboost (Turbocharged) Engines Set Includes: T.D.C. Crank Timing Pi...

Used for holding the flywheel on Ford 1.5L & 1.6L engines Applications: Escape, Fiesta, Fusion & Transit Connect Compare to Factory Tool #...

Holds camshafts in position during timing belt replacement Services many makes, including Fiat, Ford, Honda, Hyundai, Mazda, Mitsubishi, Nissan, S...

Used for fast oil filling without spillage or waste Great for vehicles with internal baffles or shields which restrict traditional oil funnels Ser...

Use for easily removing stuck injectors Perfectly weighted slide hammer for injector extraction Services: Ford EcoBoost GDI engines (1.0L, 2.0L &a...

Extractor Screws

Includes camshaft holding fixtures & chain tensioner hold down pin Services: Ford EcoBoost V6 engines Engine: 2.7L, 3.5L & 3.7L V6 Compon...

Holds camshaft sprockets on 2005 & Up Subaru Models with 2.5L Turbo and 3.6L 6-cylinder engines Diameter - 31.7mm x 28mm x 7mm OAL: 47.5 cm Co...