Engine Service

Designed for timing chain replacement for Jaguar and Land Rover 2.0L Turbo (EcoBoost) engines Specifically for 2013-2015 Jaguar XF RWD and 2013-20...

The Ford crankshaft damper holding tool, part number 6150, is designed for holding the crankshaft damper in place during servicing of 2012 and new...

This Cam Phaser Holding Tool is designed to be used on Ford engines to lock cam sprockets and torque bolts Services: Ford 4.6L 3v V8 & 5.4L 3v...

Use to install the piston pin circlip on the 986 / 987.1 & 996 / 997.1 Found in P/N: 5018 - Porsche Cam Alignment Tool Kit & 7089 - Porsch...

Use for aligning the camshaft timing angle to correct position Services Mercedes Benz (60°) V6 engine from 2011-2019 Compare to Mercedes Benz Fact...

Porsche Camshaft Tool Kit - 911 & 914/916. Porsche Camshaft Tool Kit includes: 3762 - Porsche Cam Turning Wrench - 911 & 914/916 - Porsch...

Porsche Camshaft Nut Wrench is used for loosening and tightening the camshaft nut The crowfoot design socket is a 46mm with a ½” square drive Appl...

Use for removing fuel injectors from BMW/MINI vehicles Services B38 (1.5L), B48(2.0L) & B58(3.0L) Engines Alignment plate and injector adapter...

Use for aligning the camshaft to TDC (Top Dead Center) Applications: 2014+ Mercedes Benz AMG C63, E63, S63, G63, GT and GT-S with biturbo 4.0L V8 ...

Use for holding the crankshaft for service Services: B38 (1.2L & 1.5L), B48 (2.0L) & B58 (3.0L) engines, 2015+ Application: BMW 340i, 440i...

Use for disassembly of counterbalance shaft gears Pressed on gear can only be removed with this tool Use with standard open-end 24mm hex wrench Se...

Drill Support + Drill 3.2mm

Sanding Papers Diameter 16mm (Set of 10)

Drill Holder

Puller Support + Puller M4

Puller Support + Puller M3

17mm Offset Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

Lock Pin - Thin Compare to Ford Factory Tool 303-507 Applications Make Model Engine Years Ford Escape 2.3L DOHC 4V I4 2005-2012 Ford Fusio...

Lock Pin - Thick Compare to Ford Factory Tool 303-748 Applications Make Model Engine Years Ford Fiesta 1.25L Duratec 2005-2008 Ford Fiesta...

Removes crank bolt on Mercedes Benz - M112, M113, M137, M156*, M275 & M285 Services: C240, C280, C320, C43 AMG, CL55 AMG, CLK320, CLK55 AMG, E...

Holds camshaft in position during valve timing adjustment Services Porsche 996 Turbo Use in conjunction with CTA 3886 Compare to Porsche Factory T...

Tool mounts to the front of the block, its tabs engage both cam phasers to be held in place so the phaser bolts may be serviced The ECOTEC engines...

Tool kit is designed to service the engine timing system on Porsche 986, 987.1, 996, & 997.1 models The entire kit comes packed in a custom b...

Rotates camshaft for adjusting the engine timing or tightening the timing chain Applications: Audi A6, A7 & A8 equipped with the V8 4.0L TFS...

For servicing the Camshafts and the Timing Chain during Installation & Removal on Mercedes Benz (3.0L CDi Diesel engine) Included in kit: 10...

Used to counter-hold the crankshaft pulley to release and tighten center bolt Compare to Volvo Factory Tool: #999 5433 Application Details ...

Spring-loaded design for setting pins in variable positions Grooved pins hold the camshaft pulley stationary while loosening and tightening the ce...

Crankshaft socket slips over crank snout Enables engine builder to rotate a complete engine with any 1/2" ratchet or breaker bar Designed to allow...

Services belts on Volvo & BMW Heavy-duty long bar with T60 Torx Bit on one end & T50 Torx Bit on other end, plus 16mm x 12-point opening b...

Used for installing serpentine belts for A/C compressors on N62 engines which are not equipped with automatic belt tensioners Some N62 powered car...

A must for removing and installing serpentine belts with spring-loaded idler pulleys 23” long slender design provides proper reach and prevents ...

Kit combines CTA: 1068 - Crank Bolt Socket - 27mm Use for easily breaking loose crank bolts Counter-weighted design for high torque application...

Set of three wedges designed to hold/wedge while performing timing service Use on Sigma platform engines, 1.4L & 1.6L Duratec 16V engines from...

Fits into the idler pulley and turns it to release tension for replacement of the serpentine belt 3/4" square head Applications 850 (1993-1997)...

Rotates & holds intake camshaft during timing chain service on TFSI engines 3/8" square drive Compare to Factory Tool #T10567 & #40266 Ap...

This wrench is designed for servicing the timing belt Use for installation on 2.2L & 2.5L liter I4 In-Line 4 engines Features special 7-point ...