Engine Service

Removes injectors on many Dodge pickups & vans Cummins 5.9L & 6.7L Diesel engines Application Details Make Model/Engine Year ...

Services Volvo 850, 940, 940SE, 960, S60, S70, S80, V70, V70XC, XC70 & XC90 Compare to Volvo Factory tool #9995371 Because threads are very fi...

Services Ford vehicles w/ 4.6L, 5.4L & 6.8L 3V engine Compare to Ford Factory Tool 303-1039 Instructions 1. Install 2-leg main body below th...

Valve spring compressor for Jeep, Dodge & Chrysler 3.7L & 4.7L engines Services DR, HB, KA, KJ, KK & ND systems 3/8" drive Applicatio...

Counter-weighted design for high torque applications, including: 21mm hex pulley damper bolts on Chevy, Chrysler, Dodge, Ford, GM, Jeep and Mazd...

Counter-weighted design for high torque applications, including: Honda engines with 19mm hex pulley damper bolt. Toyota engines with 19mm hex ...

For replacing the fuel filter or servicing the water sensor without damage to parts. Services '01 - '11 6.6L Duramax diesel engines. 1...

200mm & 230mm extra-long T50 and T60 Torx® wrenches reach BMW headbolts 9243 - T50 Socket 9244 - T60 Socket Models serviced include N52 non...

Service head bolts on many VWs and Audis 1/2" square drive and 4-1/4" (10.7cm) long for deep-reach applications Ribe wrenches will also service...

Installs and removes piston rings without damaging Spring loaded Range: 2-1/2 - 6-1/4" (64 - 159mm)

Used to install Harmonic Balancers on V8s and V6s on '04 - current Ford*, '08 - current GM**, & '06-current Chrysler/Dodge*** Reduces risk of...

Removes corrosion and straightens damaged threads in Oxygen Sensor holes M18 x 1.5 size can also be used on same size Spark Plug threads Use wi...

Extended crowfoot design allows access to oxygen sensors that are located in the exhaust manifolds Full slot accommodates connectors on heated oxy...

Used for servicing a wide range of 22mm oxygen sensors Included are 3 of the most popular versions of the 22mm socket: #2062 - Narrow Slot Oxygen...

Designed for installing lower seals on Volvo VEP 4-cylinder direct injection injectors Ensures proper seal positioning to maintain injector functi...

Designed for Volvo VEP gasoline 4-cylinder direct injection engines Removes stuck injectors without damaging surrounding components Heavy-duty con...

Designed for installation of front and rear crankshaft seals and wear sleeves on Cummins diesel engines Precision-machined installers ensure corre...

Secures the crankshaft at top dead center during timing belt service Prevents rotational movement while aligning cam and crank timing marks Compar...

Adjusts the drive belt tensioner on the EA211 1.4T engine Provides controlled leverage to set correct belt tension during installation Compare to ...

Locks the camshaft in the correct position during timing chain service Prevents cam movement for accurate timing adjustment on Jeep 2.0T engines C...

Designed for timing service on the EA211 1.4T engine in various VW and Audi models Includes all required components for accurate timing on U.S.-sp...

Designed for locking the cam gears in place during timing belt service to ensure accurate alignment Services: 2019+ Ford and Lincoln vehicles with...

Designed to hold timing marks in place during timing chain replacement on Ford engines Essential for correct timing adjustments, ensuring engine p...

Removes injectors using M8 x 1.25 thread and included mini slide hammer Installs Teflon seal with included tapered cone Made of desulphurized carb...

• Aligns the camshaft to Top Dead Center (TDC) on M176, M177, and M178 engines• Alternative to factory timing plates for precise timing adjustments...

• Aligns camshafts in the TDC position on Mercedes-Benz M176 V8 engines• Required for 2019+ applications on W217 and W222 series• Must be used with...

Kit includes tools for timing and camshaft service on Ford 2.7L, 3.0L & 3.5L EcoBoost engines Provides a complete solution for camshaft alignm...

Use for removal and installation of the fuel filter/water sensor without damaging sensitive components 4 sizes in 1 wrench: 40mm (12-point) 41mm ...

Designed for checking and setting timing, as well as counter-holding the oil pump and camshaft chain sprocket during maintenance tasks on VW 2.0T ...

This comprehensive kit contains all the essential tools for servicing the crankshaft front and rear seals on Ford Powerstroke diesel engines Inclu...

This rear crankshaft seal remover is designed to remove the rear seal on 2001 and newer 6.6L Duramax diesel engines. Its three jaws grab the inner...

This crankshaft seal and wear sleeve remover is designed for servicing the front crankshaft seal on 2001 and newer 6.6L Duramax diesel engines. Th...

Master kit for servicing the front and rear crankshaft seals on 2001-2016 6.6L Duramax diesel engines Includes: 3878 Rear Crankshaft Seal Install...

Use to install and remove the camshaft adjusters  Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Master kit includes all timing tools required to set cams, valves & VANOS timing on BMW N51, N52, N53, N54 & N55 (S55) engines Incudes cam...

Thread Repair Tap M8 x 100

Thread Repair Tap M10 x 125

14mm Straight Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

13mm Offset Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

For VVL (Variable Valve Lift) only, do not use on VVT (Variable Valve Timing) engines Services newer Dodge/Chrysler/Jeep models with Pentastar VVL...

Comprehensive kit includes required components to perform complete timing service Services Porsche 911 Turbo & GT2 996 (1997-2006) & 997.1...

Holds flywheel in place when servicing the flywheel bolt and/or balancer Services Cadillac ATS, CTS, Chevy Malibu, Impala & Buick Regal Mount...