Engine Service

Removes harmonic balancers without tapped holes Services V6 & V8: GM (5.3L, 5.7L 6.0L, 6.2L & 7.0L) Chrysler, Dodge & Jeep (3.5L, 3.7...

Sockets are designed to install and remove Exhaust Gas Temperature sensors on cars & trucks without damaging connection wire, housing, sensor ...

Used to remove and install the intake manifold of a 2.0L 4V Turbocharged common rail TDI engine 10mm Triple Square (XZN) Ball End Applications:...

Designed to fit the flex plate teeth Insert the tool into the flywheel housing until it engages the ring gear Use with a 1/2" square drive tool (r...

Counter-weighted design for high torque applications, including: 21mm hex pulley damper bolts on Chevy, Chrysler, Dodge, Ford, GM, Jeep and Mazd...

Counter-weighted design for high torque applications, including: Honda engines with 19mm hex pulley damper bolt. Toyota engines with 19mm hex ...

Counter-weighted design for high-torque applications Services Honda, Kia and others with 17mm applications Use with 1/2" square drive tools

For replacing the fuel filter or servicing the water sensor without damage to parts. Services '01 - '11 6.6L Duramax diesel engines. 1...

140mm long wrench with T60 Torx® end features machined shaft to allow proper clearance to service Dual Mass Flywheel Mount Bolts, as they are off-...

Service head bolts on many VW, Audi, Jaguar & Land Rover 1/2" square drive and 4-1/4" (10.7cm) long for deep-reach applications Ribe wrenches ...

Service head bolts on many VWs and Audis 1/2" square drive and 4-1/4" (10.7cm) OAL long for deep-reach applications Ribe wrenches will also servic...

Removes and installs press-on type belt driven accessory pulleys on pumps with 3/8”-16 threaded shafts Interchangeable components allow service on...

Kit contains everything required to perform timing service on 3.5L EcoBoost engines It also services some 3.5L Duratec (non-turbo), 2.7L & 3.7...

Master kit for servicing the front and rear crankshaft seals on 2001-2016 6.6L Duramax diesel engines Includes: 3878 Rear Crankshaft Seal Install...

Replacement L-Pin with loop and 90 degree angle is used in kits: 5000 5001 5006 1205

Porsche Camshaft Nut Wrench is used for loosening and tightening the camshaft nut The crowfoot design socket is a 46mm with a ½” square drive Appl...

Services BMW B38 & B48 engines Kit Includes: 2301 - BMW B38/B48 Press Off Tool 2302 - BMW B38/B48 Crankshaft Holding Tool Use for disassembl...

Provides a specialized solution for efficiently handling Valvetronic springs during head repairs or vanos/cam service Tool features a clamping dou...

Universal design for locking Camshaft Sprocket Locks Camshaft sprocket in place during belt/chain replacement Easily locks and holds both camshaft...

The timing tool set includes the tools required to properly service GM Atlas/Vortec engine family Kit includes: 7459 - GM Lower Timing Gear Retai...

Use for holding the crankshaft for service Services: B38 (1.2L & 1.5L), B48 (2.0L) & B58 (3.0L) engines, 2015+ Application: BMW 340i, 440i...

Drill Support + Drill 3.2mm

Drill Holder

Tap Support + Tap M4

Puller Support + Puller M3

17mm Curved Socket

14mm Straight Socket

Lock Pin - Thick Compare to Ford Factory Tool 303-748 Applications Make Model Engine Years Ford Fiesta 1.25L Duratec 2005-2008 Ford Fiesta...

Used to properly lock and time the TDi EA288 diesel engine for 2015+ Volkswagen models. The components in the kit include: Crankshaft Lock – VW T...

Services the left & right head for 2006+ 3.0L & 3.6L V6 & 2004+ 2.8L I4, 3.5L I5 & 4.2L I6 GM Atlas engines Prevents rotation duri...

Comprehensive kit includes required components to perform complete timing service Services Porsche 911 Turbo & GT2 996 (1997-2006) & 997.1...

Holds the engine when replacing the timing belt Aligning the camshaft and crankshaft position Services vehicles with the "VEA" 2.0L turbocharged a...

Used for holding the crankshaft & camshafts when removing & installing timing components Sets the engine in the proper position i...

Holds flywheel in place when servicing the flywheel bolt and/or balancer Services Cadillac ATS, CTS, Chevy Malibu, Impala & Buick Regal Mount...

Holds intake camshaft sprocket during timing service Services Porsche 911 Turbo (996) OAL: 25cm/250mm (9.85") Compare to Porsche Factory Tool 9653...

Tensions cam chains when adjusting cam timing Services Porsche 911, 993, 964, & 996 GT3 Compare to Porsche Factory Tool 9401 Applications ...

Easily setup and service the Mercedes Benz M156 engine timing while installed A properly working timing system allows the engine’s valves to ope...

Tool kit is used to setup and service the engine timing on Porsche 4.8L V8, 3.0L Supercharged V6 & 3.6L V6 A properly working timing system al...

Locks the crankshaft and camshafts in timing position For servicing BMW B38 & B48 engine Compare to factory tool # 2 288 943, # 2 358 646 App...

Holds the camshaft phaser while performing the loosening and tightening of the Oil Control Valves during service procedures on the 3.6L Pentastar ...

One tool locks camshaft and the other locks the timing chain Services Ford 4.6L, 5.4L & 6.8L 3V engines Also includes #7639 Ford Valve Spring ...

Services the left & right head for "High Feature" 2006+ 2.8L, 3.0L & 3.6L V6 GM engines Prevents rotation during timing chain service Ind...

One tool locks camshaft and the other locks the timing chain Services Ford 4.6L, 5.4L & 6.8L 3V engines Comparable to Ford Factory Tools #5676...

Used to counter-hold the crankshaft pulley to release and tighten center bolt Compare to Volvo Factory Tool: #999 5433 Application Details ...

Spring-loaded design for setting pins in variable positions Grooved pins hold the camshaft pulley stationary while loosening and tightening the ce...

Crankshaft socket slips over crank snout Enables engine builder to rotate a complete engine with any 1/2" ratchet or breaker bar Designed to allow...

4-point design for holding the crankshaft pulley Comfort Grip Handle Applications include: Forester 2.0 (2005-2011) Impreza 1.6 / 2.0 (2005-2008)...

Specially designed to position the camshafts in TDC position Slackens and tightens the bolts attached to the camshaft gears Compare to Mercedes Be...