Engine Service

Installs crankshaft seal Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018...

Drill 2.5mm

Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011-2019 For Rear Remover - See CTA 7315 Compare to Ford Factory Tool ...

Milling Drill M10

Milling Drill M8

Kit provides tools required to remove and install all crankshaft seals on a 6.7L Power Stroke engines Services Ford Super Duty F-250, F-350, F-450...

Description: 10mm x 1/2" Square Drive w/ long shaft 12-Point wrench fit Toyota engine head bolts 10mm application include Toyota, Lexus & S...

Timing set for Ford 2.0L & 2.3L EcoBoost engine Set includes: 2880X04 - T.D.C. Crank Timing Pin 1026L - Camshaft Alignment Tool 1804 - Crank...

Set of Two Guides

Use for replacing worn or damaged manual transmission mount The vulcanized rubber mount separates from the housing causing an increase of NVH duri...

Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 & 2019 Compare to Fo...

Kit contains everything required to perform timing service on 4.6L, 5.4L and 6.8L Ford Triton engines This comprehensive kit includes the followin...

Tap M6 x 100

Locks flywheel in place when removing harmonic balancer Use on 6.6L Duramax engine with Allison automatic transmission Instead of ha...

Removes later style central valve on BMW Vanos Hubs and Ford VCTs Services BMW/MINI B36 (1.5L), B38 (1.2L & 1.5L), B48 (2.0L), B58 (3.0L) &...

Features vacuum cup & hardwood handle. Two working ends on tool for maximum coverage Large: 1-1/8" x 1-3/8"

Special configuration with 6 internal slots to service timing belt tensioner Required when replacing the idler Use with 1/2” square or 7/8” hex dr...

Use for Installation and removal of head bolts on Subaru flat boxer engines Services: 1999-2020 Subaru Baja, Forester, Impreza, Legacy, O...

Holds camshafts in position during timing belt replacement Services many makes, including Fiat, Ford, Honda, Hyundai, Mazda, Mitsubishi, Nissan, S...

Low-profile E20 Torx® socket removes and installs the low-profile bolts found on Nissan QR25's with automatic transmissions 1/2" drive ...

Used for fast oil filling without spillage or waste Great for vehicles with internal baffles or shields which restrict traditional oil funnels Ser...

Service head bolts on Jaguar & Land Rover 1/2" square drive and 4-1/4" (10.7cm) OAL long for deep-reach applications Ribe wrenches will also s...

Keeps the camshafts in position to prevent incorrect timing Use while changing the timing belt to reduce service time and prevents damage ...

Used for holding the flywheel on Ford 1.5L & 1.6L engines Applications: Escape, Fiesta, Fusion & Transit Connect Compare to Factory Tool #...

2 Pc. 1/2" Square Drive Set 12-Point wrench fits Toyota engine head bolts Includes: 9290: 8mm Applications: Toyota, Lexus & Scion up to '06...

Extractor Screws

Tool is used for holding the Crankshaft Damper on 2005-2011 Ford 2.0L, 2.3L & 2.5L engines Applications: Fusion, Focus, Transit, Milan, MKZ, E...

Cam Phaser & Timing Chain Locking / Holding Set for 3.0L, 3.2L & 3.6L VVT Pentastar engines Includes 2 camshaft phaser holders and 3 timin...

Includes camshaft holding fixtures & chain tensioner hold down pin Services: Ford EcoBoost V6 engines Engine: 2.7L, 3.5L & 3.7L V6 Compon...

Services 1999-2013 Jeep, Dodge, Chrysler w/ 3.7L & 4.7L and later 3.6L models Services DR, DS, HB, HG, KA, KJ, KK, ND, WK & XK systems 3/8...

Holds camshaft sprockets on 2005 & Up Subaru Models with 2.5L Turbo and 3.6L 6-cylinder engines Diameter - 31.7mm x 28mm x 7mm OAL: 47.5 cm Co...

Services free-wheel pulleys found on VW, Audi, Volvo, Mercedes Benz, Porsche, etc. with Bosch Alternators Features two-part design - 33 spline end...

8mm 12-point bit end w/ 3/8" Square Drive Bit Holder Applications include, Toyota, Lexus & Scion up to '06 Note that hex shaft is marked 1...

Mercedes Benz M157, M276 & M278 timing tool set Designed to align the camshaft timing angle for correct position Also, for removing injectors ...

Cam Phaser & Timing Chain Locking / Holding kit for 3.0L, 3.2L, 3.6L VVT & VVL Pentastar engines Includes 2 camshaft phaser holders, 5 tim...

Drill Support + Drill 2.5mm

Timing set for Ford 1.6L N/A (Naturally Aspirated) engine plus the 1.5L/1.6L Ecoboost (Turbocharged) Engines Set Includes: T.D.C. Crank Timing Pi...

Subaru (FA & FB Engine) Crankshaft socket slips over crank snout Enables engine builder to rotate a complete engine with any 1/2" ratchet or b...

Sets & adjusts timing on '98 - '07 VW TDi engines Engine: 1.9L & 2.0L TDi Includes: Lock Pins Cam Lock Bar ...

Used for turning the crankshaft pulley Working End: 22mm square drive with 12mm rotating pivot pin Drive: Dual 1/2" Square drive & 24mm ...

The inner hex walls of the socket are machined EXTRA-DEEP for clearance Clears the sensor connection bracket for easy removal of the Ford Fuel / E...

Services clutch pressure plate bolts / assemblies Use with a 3/8" square drive Applications: Mitsubishi Eclipse, 3000 & Dodge Stealth Size Ref...

M6 x 100 Puller

Tap Support + Tap M3

19mm bushed socket to prevent slippage and rounding off of the cam bolt at the end of the camshafts Services 1996-1998 Porsche 911, 3.6L ...

GM 1.6 & 1.8L 16V engine Designed to lock the camshafts in their required timing position Ensure proper alignment of the camshafts Packed in b...

Bracket is used to hold a GM 1.5L engine Bracket is installed onto both camshafts, and holds the assembled hex on both cams to maintain t...