Engine Service

Holds camshafts in position during timing belt replacement Services many makes, including Fiat, Ford, Honda, Hyundai, Mazda, Mitsubishi, Nissan, S...

Services free-wheel pulleys found on VW, Audi, Volvo, Mercedes Benz, Porsche, etc. with Bosch Alternators Features two-part design - 33 spline end...

Sets & adjusts timing on '98 - '07 VW TDi engines Engine: 1.9L & 2.0L TDi Includes: Lock Pins Cam Lock Bar ...

Used for turning the crankshaft pulley Working End: 22mm square drive with 12mm rotating pivot pin Drive: Dual 1/2" Square drive & 24mm ...

Counter-weighted design for high torque applications, including: Mercedes Benz (Can be used with CTA 3998 for Benz Applications) Nissan/Infinit...

For use with #2865, 2867 & 2869 Camshaft Holders to lock the crankshaft at TDC Comparable to OEM #T40026 Application Details Make M...

Service head bolts on many VW & Audi models 1/2" square drive and 5-1/2" (14cm) long for deep-reach applications Ribe wrenches will also servi...

For removal & installation of 4/3-way central valve for camshaft adjustment Services 2.0L (4v) generation 1, 2 & 3 TFSI engine with chain ...

For assembly and disassembly of pulleys on camshaft, vibration and oil pump Includes 2 sets of pins, one with 3-steps for a total of 4 dia...

Used to remove and install the intake manifold of a 2.0L 4V Turbocharged common rail TDI engine 10mm Triple Square (XZN) Ball End Applications:...

Service head bolts on many VWs and Audis 1/2" square drive and 4-1/4" (10.7cm) OAL long for deep-reach applications Ribe wrenches will also servic...

Spring-loaded design for setting pins in variable positions Grooved pins hold the camshaft pulley stationary while loosening and tightening the ce...

Services Audi 4.2L V8 engines Includes: 2872 - TDC Lock Pin Tool (#T40026/T40069) 2879 - Camshaft locking bars (#T40046) 1722 - Audi Se...

Holds camshaft for removal and installation of the timing belt and diesel injection pump? All steel construction Applications: Volkswagen &...

Services Camshaft Adjuster (#10 Polydrive) bolts, where clearance is critical Bolts are found at the back of the engine-bay near the firewall 9mm ...

Rotates & holds intake camshaft during timing chain service on TFSI engines 3/8" square drive Compare to Factory Tool #T10567 & #40266 Ap...

For removal & installation of 4/3 way central valve for camshaft adjustment on 1.8 & 2.0 generation 1, 2 & 3 TFSI engines 3 sizes with...

All the tools needed to service '09 & up models with turbo engines - TFSI Includes crank counter hold tool, crankshaft thrust piece, (4) drift...

Locks crankshaft in place during timing belt replacement Services 04-10 VW, Golf, Jetta & New Beetle with TDI Pump Duse Requires CTA #2769 Loc...

Services 2006 - 2009 VW / Audi 2.0L Turbo engines Comparable to OEM #T10252 Application Details Make Model Trim Engine Year Audi A3 B...

Adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tension adjustment ...

2-pin wrench adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tensio...

Special bars lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC ...

Special bars lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC ...

12mm Triple-Square "XZN" 12-Point Service most VW and Audi headbolts 150mm long wrenches Use with 1/2" square drive tools Made...

Used for replacement of actuator with position sender for charge pressure actuator Use on 2.0L Diesel Common Rail engine Compare to VW/Audi Factor...

“Lollipop” wrench locks the pulley on the waterpump and easily loosens stubborn bolts found on: VW Polo, Golf, Passat and Audi 80/A4 Inc...

Locks crankshaft and camshafts in place to set and hold precise engine timing Allows proper camshaft and pulley torquing without losing set positi...

Set of 3 durable steel pins designed to lock the serpentine and cam belts on many VAG engines Insert into holes on tensioner housing to hold arm s...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Use to install and remove the camshaft adjusters  Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Required for the timing chain replacement on Volkswagen 12v VR6 engines Applications: MK3 & MK4 Golf (GTI), Jetta, Corrado ...

Locks camshafts and crankshaft in position when servicing the timing chain and setting engine timing A properly working timing system allows the e...

Used for creating slack on the chain tensioner for replacing the timing chain without the need for removing the front cover Necessary for pushin...

Used to remove & install the damper pulley on TSI / TFSI engines Kit includes: Counter-hold tool, Tensioning pins, Turning over tool & Knu...

VAG Timing Tool Kit - 1.8L & 2.0L (TSI / TFSI) includes the following: 1032 - 3 Pc. V.A.G. Camshaft Adjusting Socket Set - 2.0L (TFSI) For rem...

Sets the camshaft timing without the need to remove the cam cover Compatible with Volkswagen/Audi 1.9SDi/Tdi Diesel Engines Applications include: ...

Sets timing in 2.5L, 3.2L, 4.2L, & 5.2L engines Includes 2 steel locking clamps with set of threaded bolts for locking camshafts when settin...

Locks camshafts in place during timing service on various '01 & up VW, Audi & Porsche vehicles Precision cut Engines: 2.8L (AXK) (BDF), 3....

Adjusts the timing chain through the camshaft adjuster Aluminum die-cast construction 24mm hex drive end Services various Audi models from '05 &am...

Locks crankshaft in place during timing belt replacement on oval pulley gear #038105263H found on: 2005-2007 Volkswagen Jetta 1.9L TDI with Engin...

For VAG 1.9L & 2.0L TDI PD DOHC Engines found on Audi A4, A6, VW Golf, Jetta and Touareg Models Includes: 2 Crankshaft Holders and complete se...

Secures Bosch diesel injection pump sprocket from rotating during R & R of cam shaft drive belt on '99 & up TDI engines. Also works on ...

For installing timing belts on VW TDI (ALH only) including 1999-2004 Golf, Jetta & Beetle Includes the following tools: 2766 - 2-Pin Tensione...

For adjusting camshaft position during cylinder head reassembly or setting injection pump Works on VW Diesel with ALH engines Plus Audi diesel ...