Engine Service

Locks crankshaft and camshafts in place to set and hold precise engine timing Allows proper camshaft and pulley torquing without losing set positi...

This Cam Phaser Holding Tool is designed to be used on Ford engines to lock cam sprockets and torque bolts Services: Ford 4.6L 3v V8 & 5.4L 3v...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Use to install the piston pin circlip on the 986 / 987.1 & 996 / 997.1 Found in P/N: 5018 - Porsche Cam Alignment Tool Kit & 7089 - Porsch...

Use for aligning the camshaft timing angle to correct position Services Mercedes Benz (60°) V6 engine from 2011-2019 Compare to Mercedes Benz Fact...

Porsche Camshaft Tool Kit - 911 & 914/916. Porsche Camshaft Tool Kit includes: 3762 - Porsche Cam Turning Wrench - 911 & 914/916 - Porsch...

Porsche Camshaft Nut Wrench is used for loosening and tightening the camshaft nut The crowfoot design socket is a 46mm with a ½” square drive Appl...

Use for holding the crankshaft for service Services: B38 (1.2L & 1.5L), B48 (2.0L) & B58 (3.0L) engines, 2015+ Application: BMW 340i, 440i...

Use for disassembly of counterbalance shaft gears Pressed on gear can only be removed with this tool Use with standard open-end 24mm hex wrench Se...

Sanding Papers Diameter 16mm (Set of 10)

Thread Repair Tap M10 x 100

Puller Support + Puller M4

17mm Offset Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

Services the left & right head for 2006+ 3.0L & 3.6L V6 & 2004+ 2.8L I4, 3.5L I5 & 4.2L I6 GM Atlas engines Prevents rotation duri...

Removes crank bolt on Mercedes Benz - M112, M113, M137, M156*, M275 & M285 Services: C240, C280, C320, C43 AMG, CL55 AMG, CLK320, CLK55 AMG, E...

Used for holding the crankshaft & camshafts when removing & installing timing components Sets the engine in the proper position in order t...

Holds camshaft in position during valve timing adjustment Services Porsche 996 Turbo Use in conjunction with CTA 3886 Compare to Porsche Factory T...

Tool kit is designed to service the engine timing system on Porsche 986, 987.1, 996, & 997.1 models The entire kit comes packed in a custom b...

Rotates camshaft for adjusting the engine timing or tightening the timing chain Applications: Audi A6, A7 & A8 equipped with the V8 4.0L TFS...

Holds the camshaft phaser while performing the loosening and tightening of the Oil Control Valves during service procedures on the 3.6L Pentastar ...

For servicing the Camshafts and the Timing Chain during Installation & Removal on Mercedes Benz (3.0L CDi Diesel engine) Included in kit: 10...

Required for proper installation of the Micro-V Stretch Belt on the A/C and Alternator Drive Avoid damage to the belt, A/C and Alternator Drive Se...

Services the left & right head for "High Feature" 2006+ 2.8L, 3.0L & 3.6L V6 GM engines Prevents rotation during timing chain service Ind...

Aligns camshaft timing at TDC position on N20 & N26 engines Compare to BMW Factory tools: 83302212831, 83302212830, 83302219548, 83300495070 &...

Spring-loaded design for setting pins in variable positions Grooved pins hold the camshaft pulley stationary while loosening and tightening the ce...

Crankshaft socket slips over crank snout Enables engine builder to rotate a complete engine with any 1/2" ratchet or breaker bar Designed to allow...

4-point design for holding the crankshaft pulley Comfort Grip Handle Applications include: Forester 2.0 (2005-2011) Impreza 1.6 / 2.0 (2005-2008)...

Services belts on Volvo & BMW Heavy-duty long bar with T60 Torx Bit on one end & T50 Torx Bit on other end, plus 16mm x 12-point opening b...

Used for installing serpentine belts for A/C compressors on N62 engines which are not equipped with automatic belt tensioners Some N62 powered car...

A must for removing and installing serpentine belts with spring-loaded idler pulleys 23” long slender design provides proper reach and prevents ...

For BMW N20 & N26 engine Use for securing the crankshaft with the transmission installed (connected to engine) While replacing the timing cha...

Set of three wedges designed to hold/wedge while performing timing service Use on Sigma platform engines, 1.4L & 1.6L Duratec 16V engines from...

Fits into the idler pulley and turns it to release tension for replacement of the serpentine belt 3/4" square head Applications 850 (1993-1997)...

Rotates & holds intake camshaft during timing chain service on TFSI engines 3/8" square drive Compare to Factory Tool #T10567 & #40266 Ap...

All the tools needed to service '09 & up models with turbo engines - TFSI Includes crank counter hold tool, crankshaft thrust piece, (4) drift...

Services BMW: M21, M40, M41, M42, M43, M43TU, M44, M47, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57TU, M60, M62, M62TU, M70, M73, S50B30, S50B...

Includes jig to align camshafts during assembly Includes TDC pin to align the flywheel Services BMW M42, M44, M50, M52, M52TU, M54, M56, S50(US) &...

Extra-long (26" / 66cm) handled tool with special jaws relieves tension on belt tensioner for poly-ribbed belt service Services: R53 Mini Cooper ...

32mm Wrench removes the lock nuts on the thermo-viscous fan, while the other holds the water pump pulley while loosening the radiator fan Services...

Adjustable handle position allows the tension to be applied directly to the idler roller even with limited access Pins on tool engage the offset...

Application: Cars/Light Trucks Depth: 4" (100mm) Range: 53 - 175mm Features ratchet mechanism with square drive tools to adjust di...

Application: Passenger Cars Depth: 3" (75mm) Range: 60 - 175mm Features ratchet mechanism with square drive tools to adjust diameter, enlarged cri...

Removes and installs the serpentine belt on B36, B38, B46 & B48 engines Services 2014+ B36/B38 (3cyl) & B46/B48 (4cyl) Compare to BMW Fac...

#9 Ribe/Poli-drive (10mm) Service most VW & Audi headbolts 150mm long wrenches Use with 1/2" square drive tools Made i...

Used for replacement of actuator with position sender for charge pressure actuator Use on 2.0L Diesel Common Rail engine Compare to VW/Audi Factor...

Primarily services Ford 4.0L SOHC V6's And some late model 4.6L V8's 3 pieces with detachable end to enable access in tight areas Compare to Ford ...