Black Friday

Used for turning the crankshaft pulley Working End: 22mm square drive with 12mm rotating pivot pin Drive: Dual 1/2" Square drive & 24mm ...

Highest grade aluminum die-casting Extra "step" with 6 notches to engage tabs on Filter Housing Caps spreads torque loads and prevents damage Fits...

Kit includes both the 9360 (M20x1.5) and 9361 (M22x1.5) thread chasers, offering a complete solution for cleaning threads in NOx/Soot sensor holes...

Low profile design #3 Phillips bit allows access into tight areas Coated with a Titanium-Nitrate skin for extra durability Use with a 1/4" Drive o...

Services elliptical-shaped fasteners now found on many vehicle applications Standard "Star" or Ribe designs will not fit these fasteners Black fin...

Remove new, plastic oil drain plugs without damage Mates perfectly with oil drain plug Widened thumb-grip allows proper torque Compare to VW Facto...

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings 84mm x 14 Flute Interior Diameter 3/8” square drive Black fi...

The inner hex walls of the socket are machined EXTRA-DEEP for clearance Clears the sensor connection bracket for easy removal of the Ford Fuel / E...

The turbo system leakage tester helps locate air leaks in the components by plugging the output side of the turbo and plugging the intake inlet Ai...

Brake Bleeding Adapter Pro Series features all metal construction adapter Services Nissan models I.D. = 24mm Adapter has a 90° swivel connection (...

Compresses belt tensioner spring when replacing the engine drive belt and alternator Services GM 2.4L EcoTec (Hybrid) 2011-2016; Buick Regal, LaCr...

Use this camshaft alignment tool on the upgraded 3.5L Ford EcoBoost engine Applications: Expedition (2018-2019), F-150 (2017-2019), Ford G...

Applications: Isuzu Trooper, Rodeo, Amigo & pick-ups (1988+) Honda Passport & Jeep J20 pick-ups w/ Dana 60 axle (1989+) Nissan Xterra (...

Services Transit 2.0L, 3.5 GTDI & 6.2L Boss engines Both ends required due to limited clearance between fuel line connector end and fuel rai...

For elliptical-shaped Torx Plus® fasteners Services GM - transmission bell housing bolts & Ford - seat belt anchors Size: TP55 1/2" Square Dri...

Nylon rails are pre-printed with socket sizes for easy identification Features 13 recessed springs to hold the socket Rails include mounting holes...

Cam Phaser & Timing Chain Locking / Holding kit for 3.0L, 3.2L, 3.6L VVT & VVL Pentastar engines Includes 2 camshaft phaser holders, 5 tim...

Tightens top mount nut with proper torque while holding the strut Includes: 82mm Deep Sockets: 16, 17, 18, 19, 21, 22 & 24mm w/ 21mm w/ hex...

Click here for application chart of clutch tool range Spline Diameter: 1 3/4" Metric Spline: 44.4500 Spline Count: 10 Pilot Diameter: 1.180 Metric...

Spline Diameter: 7/8" Metric Spline: 22.2250 Spline Count: 28 Pilot Diameter: .825 Metric Pilot: 20.9550 Precision tool for accurate alignme...

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings 74mm x 15 Flute Interior Diameter 3/8” square drive Black fi...

High quality terminal disconnect tool eliminates damage to wires or terminal blocks Dim: 1.2mm x 0.6mm Applications include, but not limited to: ...

Designed to remove & install the injector feed line Services Detroit Diesel engines DD5, DD8, DD13, DD15 & DD16 19mm hex with a crowfoot d...

Removes broken glow plug tips stuck in the cylinder head. The tap, drill bit and extractor holders are fitted to the body of the original plug and...

I.D. = 42mm O.D. = 57.5mm Included in 11pc. Master Cylinder Adapter Kit - CTA Part # 7300 Nitto fitting size: 1/2" / Threads: 1/8" BSP Applicati...

This Brake Bleeder Wrench Set includes 7 popular sized wrenches and a 4 foot hose to allow use on virtually any car, SUV, light truck, or motorcyc...

For VVL (Variable Valve Lift) only, do not use on VVT (Variable Valve Timing) engines Services newer Dodge/Chrysler/Jeep models with Pent...

Properly installs the injector seal Services Ford 1.6L, 2.0L, 2.3L, 3.5L, and 3.7 GTDI Engines Compare to Ford Factory Tools 310-207 & 303-15...

120mm long socket for extra-deep reach 3/8" Drive 6 Point 17mm Applications: Diesel glow plugs BMW E90/92 ...

Tap Support + Tap M3

Spline Diameter: 15/16” Metric Spline: 23.8125 Spline Count: 23 Pilot Diameter: .590 Metric Pilot: 14.986 Precision tool for accurate alignment of...

Use with CTA #7400 Will work on most "Non-CTA" ATF Filling System Tanks Applications: ZF transmission: ZF5hp, ZF6hp, ZF8hp (Look for ...

Used for removing & installing the oil drain plug on 4.2L FSI, 4v V8 engine Also used for removing & installing the intake manifold on 2.0...

Service male hex drain plugs. Offset head with anti-slip rubber grip, 6 point wrench end plus open end Chrome vanadium steel Size: 15mm

Separates the steering knuckle & suspension joints from control arms and strut assemblies using an impact hammer Can also be used to remove wh...