Black Friday

Services GM vehicles with 6L50, 6L80, 6L90, 8L45, 8L90, 10L60, 10L80 & 10L90 Transmissions Use with CTA 7400 Tank, will work on most "Non-CTA"...

"Double-D" socket holds shock piston stem while deep socket is used to remove the nut Internal dimensions: .33"(8mm) long x .25"(6mm) wi...

Removes damaged glow plugs, even when compartment is not easily accessible Easy removal in narrow engine bays and engines with glow plugs on the f...

This tool is designed to remove and install the hub nut on these axles, which is critical to maintaining the proper preload on the axle components...

Remove new, plastic oil drain plugs without damage Mates perfectly with oil drain plug Widened thumb-grip allows proper torque Applications: Acadi...

Comprehensive "Flip" socket set offering two hex sizes in one socket. Half metric sizes for the removal of inflated, warped and mangled chrome-ca...

Adapter 1/2 Turn Thread Color: Red Included in kit #7333 O.D. of working end: 35.25mm Applications Make Model Year Cadillac CTS *******...

Features a 2-1/2-Inch / 63mm-diameter gauge with dual-calibration (0 - 1,000 PIS / 0 - 70kg/cm2) and side-release valve for multiple readings with...

Press fit rear seal to engine block & crankshaft for proper fitment of inner & outer seal body Services GM/ISUZU 6.6L Duramax 200...

Kit includes #3930 11 Pc. Brake Bleeding Adapter Pro Series and #7015 Pressure Brake Bleeder Tank Pro Series feature all metal construction adapte...

Brake Bleeding Adapter Pro Series features all metal construction adapter Services GM, Tesla Model 3 & Y I.D. = 37mm Adapter has a 90° swivel ...

Brake Bleeding Adapter Pro Series features all metal construction adapter Services GM, Tesla Model S & X I.D. = 36mm Adapter has a 90° swivel ...

4 Pc master set for extracting broken dipstick tubes on Ford, Dodge, & GM Dipstick tubes are prone to break in these makes and models When the...

Services elliptical-shaped fasteners now found on many vehicle applications Standard "Star" or Ribe designs will not fit these fasteners Black fin...

Removes broken glow plug tips stuck in the cylinder head. The tap, drill bit and extractor holders are fitted to the body of the original plug and...

To Test Pressure Relief Valve in Cooling System Cap All metal construction 32mm Use with CTA #7050 Pressure Tester Compatible with other Pressure...

Adapter 1/4 Turn Thread Color: Silver/Aluminum Included in kit #7333 O.D. of working end: 35.50mm Applications Make Chevrolet GMC Cad...

Hard-to-find bit-sockets to service "Figure 8" screws on old GM cars, trucks & some non-automotive applications Applications include headlight...

Extracts broken dipstick tubes, a common issue on GM 4.8L, 5.3L, 5.7L, 6.0L & 6.2L Engines during engine service When the dipstick tube breaks...

Designed for the L5P Diesel engine with two tank caps One cap is located on the side of the tank (Vented) with right-hand threads The other is lo...

Pro Series features all metal construction adapters Services most makes and models on the road today, including new EV applications Most adapters ...

Tool holds the camshaft at T.D.C. to ensure proper timing when performing service on timing system components (cams, gears, chains, etc.) Designed...

Disconnect tool is required to remove the fuel line connector from the fuel filter For GM 5.3L V8 Engine Applications: Avalanche, Tahoe, Silverado...

Used in conjunction with 7024 to close hole on 2-hole master cylinder Included in 11pc. Master Cylinder Adapter Kit - CTA Part # 7300 I.D. = 43.5m...

Use for servicing GM ignition switch modules Size: E4 Torx Length: Extra-Long (50mm) Drive: 1/4"

This tool is part of CTA #4380 Spare Tire Tool Kit Use for removal & installation of spare tires mounted under vehicle Working end - Flat H...

The timing tool set includes the tools required to properly service GM Atlas/Vortec engine family Kit includes: 7459 - GM Lower Timing Gear Retai...

Applications: Chevy & GMC 5,200 & 7,200 lb axles (1946+) 3/4" square drive Dimensions: OAL: 2-7/8" Depth:...

Used to install Harmonic Balancers on V8s and V6s on '04 - current Ford*, '08 - current GM**, & '06-current Chrysler/Dodge*** Reduces risk of...

Designed to service 17mm lug nuts or Lug Bolts with missing and distorted chrome caps, found on many Dodge, Chrysler, Jeep, Ford, Lincoln, GM,...

Removes harmonic balancers without tapped holes Services V6 & V8: GM (5.3L, 5.7L 6.0L, 6.2L & 7.0L) Chrysler, Dodge & Jeep (3.5L, 3.7...

Applications: 9-pin design fits retaining nut on 2WD and 4WD drive Avalanche, Cheyenne, Escalade, Sierra, and Silverado trucks with...

Removes frozen or caked injectors without removing the electrical part Services older and late model vehicles, including Denso, Siemens, Bosch and...

Holds torsion bar while making adjustments Services 2011 & up HD & C/K trucks (GM Trucks) Forged construction Bright blue body Click HERE...

Removes the Pivot Pins found on both tilt and telescopic steering columns Works on GM, Ford, and Chryslers with Saginaw steering columns

Hard-to-find bit-sockets to service "Figure 8" screws on old GM cars, trucks & some non-automotive applications Applications include headlight...