Black Friday

Comprehensive "Flip" socket set offering two hex sizes in one socket. Half metric sizes for the removal of inflated, warped and mangled chrome-ca...

Compresses belt tensioner spring when replacing the engine drive belt and alternator Services GM 2.4L EcoTec (Hybrid) 2011-2016; Buick Regal, LaCr...

Tool holds the camshaft at T.D.C. to ensure proper timing when performing service on timing system components (cams, gears, chains, etc.) Designed...

Bracket is used to hold a GM 1.5L engine Bracket is installed onto both camshafts, and holds the assembled hex on both cams to maintain t...

I.D. = 45mm O.D. = 57mm Nitto fitting size: 1/2" / Threads: 1/8" BSP Application: European & Domestic Volkswagen Audi BMW Alfa Romeo Buick ...

Use for servicing GM ignition switch modules Size: E4 Torx Length: Extra-Long (50mm) Drive: 1/4"

The timing tool set includes the tools required to properly service GM Atlas/Vortec engine family Kit includes: 7459 - GM Lower Timing Gear Retai...

Used to install Harmonic Balancers on V8s and V6s on '04 - current Ford*, '08 - current GM**, & '06-current Chrysler/Dodge*** Reduces risk of...

Designed to service 17mm lug nuts or Lug Bolts with missing and distorted chrome caps, found on many Dodge, Chrysler, Jeep, Ford, Lincoln, GM,...

Removes and installs press-on type belt driven accessory pulleys on pumps with 3/8”-16 threaded shafts Interchangeable components allow service on...

Services the left & right head for 2006+ 3.0L & 3.6L V6 & 2004+ 2.8L I4, 3.5L I5 & 4.2L I6 GM Atlas engines Prevents rotation duri...

Services the left & right head for "High Feature" 2006+ 2.8L, 3.0L & 3.6L V6 GM engines Prevents rotation during timing chain service Ind...

For pressurizing Cooling Systems All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with oth...

Holds flywheel in place when servicing the flywheel bolt and/or balancer Services Cadillac ATS, CTS, Chevy Malibu, Impala & Buick Regal Mount...

Remove cartridge-type oil & fuel filer housing caps with 27mm hex nut Chrome vanadium steel 3/8" square drive Application Details M...

For removing and installing front hub/axle nuts 1/2" square drive Size: 36mm Point: 6 Applications include, but are not limited to: 2001 Jeep Ch...

Tool mounts to the front of the block, its tabs engage both cam phasers to be held in place so the phaser bolts may be serviced The ECOTEC engines...

Click here for application chart of clutch tool range Spline Diameter: 1" Metric Spline: 25.4000 Spline Count: 14 Pilot Diameter: .590 Metric Pilo...

For pressurizing Cooling Systems All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with oth...

Installs harmonic balancer or drive pulleys that are pressed on the camshaft Includes 12 adapters: M16-2.0 M16-1.5 M14-2.0 M14- 1.5 M12-1.75 M12-...

Used for replacing the Teflon fuel injector seals Services: Subaru 2.0L & 2.4L turbo boxer engines (2014-2019) GM 2.0L & 3.6L engines H...

Services the left & right side head 2.8L & 3.6L V6 GM engines through 2006 Prevents rotation during timing chain service Applications ...

3” long socket installs and removes Oil Pressure Switches up to 25/8” long found on some older GM and Chrysler vehicles Use with 3/8” square dri...

Required to hold the flywheel in a secure position while servicing the balancer retaining bolt This tool allows for securing the flywheel by utili...

Remove housings with cartridge-type oil & fuel filters Chrome vanadium steel 3/8" square drive 32mm Application Details Make Model Ye...

Keeps the lower timing gear locked while the cylinder head is removed from engine Services I4, I5 & I6 (Atlas) engines Without this tool, the ...

Click here for application chart of clutch tool range Spline Diameter: 1 1/8" Metric Spline: 28.5750 Spline Count: 10 Pilot Diameter: .590 Metric ...

For removing and installing front hub/axle nuts 1/2" square drive Size: 34mm Point: 6

For removing and installing front hub/axle nuts 1/2" square drive Size: 29mm Point: 6

To Test Pressure Relief Valve in Cooling System Cap All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester ...