Black Friday

Timing set for Ford 2.0L & 2.3L EcoBoost engine Set includes: 2880X04 - T.D.C. Crank Timing Pin 1026L - Camshaft Alignment Tool 1804 - Crank...

Services: Transfer cases Engine oil pans, Manual transmission Differential drain plugs Fill plugs Size: 10mm Drive: 3/8" Essential for every ...

Comprehensive "Flip" socket set offering two hex sizes in one socket. Half metric sizes for the removal of inflated, warped and mangled chrome-ca...

Kit contains everything required to perform timing service on 4.6L, 5.4L and 6.8L Ford Triton engines This comprehensive kit includes the followin...

Removes and installs water pump pulley on Ford, Lincoln and Mercury 3.0L DOHC engines Includes: Forcing screw with shaft protector Pulley removal...

Includes camshaft holding fixtures & chain tensioner hold down pin Services: Ford EcoBoost V6 engines Engine: 2.7L, 3.5L & 3.7L V6 Compon...

Separates the lower control arm ball joint from the steering knuckle Services 2005-2018 Ford, Lincoln & Mercury models (Not Limited Too) Extra...

Tool is used for holding the Crankshaft Damper on 2005-2011 Ford 2.0L, 2.3L & 2.5L engines Applications: Fusion, Focus, Transit, Milan, MKZ, E...

The crank position sensor (CPS) alignment block used for servicing the alignment of the Crank Sensor on many versions of the 2.0L & 2.3L Ford ...

Use this camshaft alignment tool on the upgraded 3.5L Ford EcoBoost engine Applications: Expedition (2018-2019), F-150 (2017-2019), Ford G...

Services Transit 2.0L, 3.5 GTDI & 6.2L Boss engines Both ends required due to limited clearance between fuel line connector end and fuel rai...

Properly installs the injector seal Services Ford 1.6L, 2.0L, 2.3L, 3.5L, and 3.7 GTDI Engines Compare to Ford Factory Tools 310-207 & 303-15...

Adapter 1/4 Turn Thread Color: Silver/Aluminum Included in kit #7333 O.D. of working end: 35.50mm Applications Make Chevrolet GMC Cad...

Kit contains everything required to perform timing service on 3.5L EcoBoost engines It also services some 3.5L Duratec (non-turbo), 2.7L & 3.7...

Designed to service 21mm lug nuts with missing or distorted chrome caps, found on many Dodge, Chrysler, Jeep, Ford, Lincoln, Toyota & More...

Must have adapter for filling/adding fluid to the 5R55W & 5R55S Automatic Transmissions Use with CTA #7400 ATF Filling Tank Can also be used w...

Comprehensive tool kit services Ford, Lincoln, Land Rover & Mazda 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L & 3.0L engines Used on EcoBoost, Dura...

Services the wide-style Inner CV Joint Assembly, found on Ford F150 4WD and other vehicles 63.5mm wide opening allows proper fitment wide applica...

I.D. = 45mm O.D. = 57mm Nitto fitting size: 1/2" / Threads: 1/8" BSP Application: European & Domestic Volkswagen Audi BMW Alfa Romeo Buick ...

Services Ford vehicles w/ 4.6L, 5.4L & 6.8L 3V engine Instructions 1. Install 2-leg main body below the camshaft and above the engine block ...

Designed to service 19mm lug nuts with missing and distorted chrome caps, found on many Dodge, Chrysler, Jeep, Ford, Lincoln, GM & More ...

Used to install Harmonic Balancers on V8s and V6s on '04 - current Ford*, '08 - current GM**, & '06-current Chrysler/Dodge*** Reduces risk of...

Designed to service 17mm lug nuts or Lug Bolts with missing and distorted chrome caps, found on many Dodge, Chrysler, Jeep, Ford, Lincoln, GM,...

140mm long wrench with T60 Torx® end features machined shaft to allow proper clearance to service Dual Mass Flywheel Mount Bolts, as they are off-...

Removes the Pivot Pins found on both tilt and telescopic steering columns Works on GM, Ford, and Chryslers with Saginaw steering columns

New Design with off-set Nitto fitting Internal Male Insert O.D. = 37mm I.D. 50.07mm Adapter O.D. = 66.5mm 3 Tab design For use with #7015 Bleeder...

Removes and installs press-on type belt driven accessory pulleys on pumps with 3/8”-16 threaded shafts Interchangeable components allow service on...

For pressurizing Cooling Systems All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with oth...

Services both Oil drain plugs & Radiator drain plugs Will NOT damage drain plugs Contains a T-handle with a square drive ball lock and 7 adap...

For removing and installing front hub/axle nuts 1/2" square drive Size: 36mm Point: 6 Applications include, but are not limited to: 2001 Jeep Ch...

One tool locks camshaft and the other locks the timing chain Services Ford 4.6L, 5.4L & 6.8L 3V engines Comparable to Ford Factory Tools #5676...

Used for installing a ball joint on a lower control arm Eliminates the need for an extra pair of hands Works with any 7/8” diameter p...

6 Point Hex Magnetic Service Ford Triton V8 and V10 Engines Length: 10" 3/8" square drive

Use for install of wheel hub oil seal on single or dual wheel axle assemblies Seal installer adapter is driven with the 7" detachable handle Appli...

12mm & 16mm threaded male ends fit spark plug ports on Ford Triton engines 8-1/2" / 22cm long flex hose for easy accessibility Works with #...

Used for removing plastic drain plugs found on many late model vehicles Will NOT damage drain plugs Adapter is marked with the #3 for ...