Black Friday

Swivel tipped forcing screw aligns to the tie rod stud to prevent damage Heavy-duty forged body Services imports and many FWD vehicles, includi...

Spread: 6" (152mm) Reach: 3-1/2" (89mm) Screw Length: 7" (178mm) Capacity: 5 tons (4.5MT) Instructions Hook the jaws to the desired gear, compone...

Removes plastic push pins found under hood and in trunk without damage to pins or anchors Features sharpened/hardened jaws and spring-loaded handl...

Applications: Ford F-series Heavy-Duty 3/4 & 1 ton 4WD trucks (1978-1984) GM 3/4 & 1 ton 4WD trucks (1973-1981) ...

Sizes: (3 piece set) 14mm, 16mm, and 18mm Service fasteners on VW, Audi, Porsche, and some Detroit Diesel engines 18mm size services rear axle bol...

Direct air line chuck for hard-to-reach valves on trucks, buses, and tractors 1/4" female NPT OAL: 6" / 15cm

Includes: 3 sets of side bolts: 5/16"-18, 5/16"-24 and 3/8"-16 Yoke and center bolt with flat adapter Widest spread is 3 - 1/2"

Removes cut, torn, and folded metal to produce long wearing surface For engine and brake cylinders, hydraulics, valve guides, lifter bores, dies...

Complete set of tools to remove and install press-on-type belt-drive Bosch and Denso Alternator Pulleys Components include: Torx ®, Triple-Square...

Removes the fuel line from center port of fuel sending unit Sizes: 3/8" 5/16"

Extract or transfer Motor Oil, ATF, Gear Lube, Gasoline, Coolant or Water from inaccessible or confined areas For cars, boats, trucks, farm equipm...

Removes oil and grease seals on cars and trucks Two-sided hardened head Heavy duty 1/2" bar stock shaft OAL: 12" (30.5cm)

Prevents oil spillage during filter change on vehicles that have filter housing caps with one-way valve Tool screws into cap to drain oil Features...

2 Pc set includes filp socket and 3" extension "Flip" Socket offers 2 hex sizes in one socket - 22mm & 24mm Use with 1/2" drive extended shank ...

2 Pc set includes filp socket and 3" extension For servicing recessed wheel nuts 1/2" drive in center allows socket to "flip" from one size to anot...

2 Pc set includes filp socket and 3" extension For servicing recessed wheel nuts 1/2" drive in center allows socket to "flip" from one size to anot...

Use to install the crankshaft rear oil seal and wear sleeve. Services 2003-2010 Ford 4.5L, 6.0L & 6.4L Power Stroke engines Applications: Ford...

High quality terminal disconnect tool eliminates damage to wires or terminal blocks Dim: Pitch 3.0mm Applications include, but not limited to: AM...

High quality terminal disconnect tool eliminates damage to wires or terminal blocks Dim: Pitch 4.0mm Applications include, but not limited to: GH...

5.0mm Female Terminal (3 Pack)

17mm Straight Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

13mm Straight Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

5 Pt. x 10mm Socket - Male Chrome-vanadium construction for durability 1/2" Square Drive Included in CTA #2752 and #7394

Go-Thru Deep Socket - 21mm

Go-Thru Deep Socket - 19mm

Holds exhaust camshaft sprocket during timing service Services Porsche 911 Turbo (996) OAL: 25cm/250mm (9.85") Compare to Porsche Factory Tool 965...

Holds camshaft in position during valve timing adjustment Services Porsche 996 Turbo Use in conjunction with CTA 3886 Compare to Porsche Factory T...

Camshaft timing guides/blocks are used as fastening springs during assembly of camshaft drive pinions when in the timing position Servic...

Kit has all the necessary components required to perform a full timing service Used for Aligning the engine camshaft position Used for Holding the...

Used for removing plastic drain plugs found on many late model vehicles Will NOT damage drain plugs Adapter is marked with the #2 for ...

Set of XZN Triple Square “L” Wrenches (12-Point) Used for service on VW, Audi, Porsche, BMW, Volvo, Mercedes-Benz, Detroit Diesel engines and many...

Tool is used for Compressing valve springs on the 3.0L without having to remove the head Applications: Fusion, Milan, MKZ, Escape, Mariner, Five H...

Used to setup and service engine timing for Porsche M96.03 3.6L H6 engine Services Porsche 986, 987, 996 & 997 generations Includes: Camsha...

Used to remove the roof grab handle of various VW models Without causing damage to clips or headliner Compare to VW Factory Tools #T10517, T10518 ...

Replacement tap for CTA 35069 - Pro-Thread Thread Repair Kit - M6 - 1.00 Thread Size: M6 - 1.00