Black Friday

Splits and reconnects single & double row timing chains on Benz gas and diesel engines Also services some Saab & BMW vehicles Provides cle...

Gently and firmly grips glass shell of bulb For all types of bulbs, including: Bayonet, screw & wedge based, and heated bulbs Cup-type ends...

Use to remove and install the snap-ring on the long reverse piston and return spring, without removing the center shaft and clutch assembly from t...

For external lock rings used in truck and tractor transmissions Spring-loaded handles and 2 sets of tips Range: 3" / 75mm OAL: 13" / 33cm

.008, .010, .012, .013, .014, .015, .016, .018, .019, .020, .025, .026" Metric markings included Offset blades for easy insertion on valve tapp...

.005 through .020" by thousandths Metric markings included Offset blades for easy insertion on valve tappets and other difficult access applica...

Chrome Moly sockets are color-coded with anodized finish Protective plastic sleeves prevent scratching of wheels and lug nuts Internal magnetic in...

Chrome Moly color-coded socket with anodized finish Protective plastic sleeve prevents scratching of wheels and lug nuts Internal magnetic insert ...

For servicing recessed wheel nuts 1/2" drive in center allows socket to "flip" from one size to another OAL: 3" (76mm) Size: 3/4" x 13/16" Extra ...

Features patented reverse tapered thread to remove stripped lug nuts or lug nuts with missing keys Fits lug nuts measuring 21mm - 22.5mm "point-to...

For removing and installing front hub/axle nuts 1/2" square drive Size: 36mm Point: 6 Applications include, but are not limited to: 2001 Jeep Ch...

Service 5-point "Star" Plus fasteners with tamper-proof design Applications include: Mirrors, Fuel Ignition Systems, Interior Trim, Dash, Airbags,...

Service standard Torx® fasteners 2-piece design for high-torque applications Size: T50 Drive: 3/8" MADE IN USA

Service standard Torx® fasteners 2-piece design for high-torque applications Size: T40 Drive: 3/8" MADE IN USA

Service head bolts on many VWs and Audis 1/2" square drive and 4-1/4" (10.7cm) long for deep-reach applications Ribe wrenches will also service...

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings 68mm x 14 Flute Interior Diameter 3/8” square drive Black fi...

Installs the front seal and wear ring on the crankshaft for 6.4L Ford Powerstroke Designed to eliminate lip flare on the wear sleeve and installs ...

Straight Lock-On Air Chuck - Open-Flow Thumb lever locks onto valve-stem while inflating tire Open (No-Valve) Design 1/4" female NPT 3/4" hex Not ...

Low-profile metal clips keep the spring-band clamp held in the open position Free up hands and pliers for the next spring-band clamp ...

"Star" Plus socket services elliptical shaped fasteners found on many vehicle Standard "Star" or Ribe designs will not fit these fasteners Black f...

Designed for the L5P Diesel engine with two tank caps One cap is located on the side of the tank (Vented) with right-hand threads The other is loc...

Spline Diameter: 15/16” Metric Spline: 23.825 Spline Count: 23 Pilot Diameter: .820 Metric Pilot: 20.85 Precision tool for accurate alignmen...

Ignition coil puller removal tool prevent coil damage caused by home-made removal methods and prevent injury to hand in tight quarters. Comfort T-...

Designed to Service BMW, Ford, Mercedes Benz, MINI, Nissan, Infiniti, Subaru, Toyota, Scion, Volkswagen, Audi, Porsche & more Features a swive...

One tool locks camshaft and the other locks the timing chain Services Ford 4.6L, 5.4L & 6.8L 3V engines Comparable to Ford Factory Tools #5676...

Sizes: M0, M1, M2, M3, M4, all 3/8" square drive, all packed on socket rail Bits have asymmetrical geometry that provides enhanced installation of...

For use in tight spaces 3.5" (90mm) long hardened jaws Adjust from 1.2" - 3.5" (30mm - 90mm) Thin Jaw Bearing Remover

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E24 - OAl 73mm 1/2" ...

Reversible ratchet type with chrome-plated tube, knurled handle and knurled locking nut holding toque setting Packed in blow mold case Drive: 1/2"...

4" / 102mm long for deep-reach applications 2-piece construction for high torque applications 1/2" drive Size: 10mm MADE IN USA Applications: cyl...

For inside pulling jobs, jaws will remove flywheel pilot and other bearings Range: 1/2" to 1-1/2" (13mm to 38mm) Replacement Jaws: 8070x06 - Stan...

Removes fly wheel pilot bearings and bushings up to 7-1/2" (190mm) long Better than slide hammer type when working in tight areas Better control f...

Spread: 17" (432mm) Reach: 15" (381mm) Screw Length: 13" (330mm) Capacity: 13 tons (11.8MT) Instructions Hook the jaws to the desired gear, compo...

Use with CTA #7400 Services VW & Audi vehicles with DSG 24 x 1.5 threaded end Will work on most "Non-CTA" ATF Filling System Tanks Applicatio...

For pressurizing Cooling Systems All metal construction with 34mm x 3mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with other ...

For pressurizing Cooling Systems All metal construction For vehicles with small, shallow necks Use with CTA #7050 Pressure Tester Compatible with...