Timing Tools

Timing set for Ford 2.0L & 2.3L EcoBoost engine Set includes: 2880X04 - T.D.C. Crank Timing Pin 1026L - Camshaft Alignment Tool 1804 - Crank...

Cam Phaser & Timing Chain Locking / Holding Set for 3.6L Pentastar engines Services 2016 and newer Chrysler, Dodge & Jeep models Compare t...

Kit contains everything required to perform timing service on 4.6L, 5.4L and 6.8L Ford Triton engines This comprehensive kit includes the followin...

Use for replacing worn or damaged manual transmission mount The vulcanized rubber mount separates from the housing causing an increase of NVH duri...

Locks flywheel in place when removing harmonic balancer Use on 6.6L Duramax engine with Allison automatic transmission Instead of ha...

GM 1.6 & 1.8L 16V engine Designed to lock the camshafts in their required timing position Ensure proper alignment of the camshafts Packed in b...

Timing set for Ford 1.6L N/A (Naturally Aspirated) engine plus the 1.5L/1.6L Ecoboost (Turbocharged) Engines Set Includes: T.D.C. Crank Timing Pi...

Removes later style central valve on BMW Vanos Hubs and Ford VCTs Services BMW/MINI B36 (1.5L), B38 (1.2L & 1.5L), B48 (2.0L), B58 (3.0L) &...

Special configuration with 6 internal slots to service timing belt tensioner Required when replacing the idler Use with 1/2” square or 7/8” hex dr...

Used for holding the flywheel on Ford 1.5L & 1.6L engines Applications: Escape, Fiesta, Fusion & Transit Connect Compare to Factory Tool #...

Holds camshaft sprockets on 2005 & Up Subaru Models with 2.5L Turbo and 3.6L 6-cylinder engines Diameter - 31.7mm x 28mm x 7mm OAL: 47.5 cm Co...

Kit contains everything required to perform timing service on 3.5L EcoBoost engines It also services some 3.5L Duratec (non-turbo), 2.7L & 3.7...

Cam Phaser & Timing Chain Locking / Holding Set for 3.0L, 3.2L & 3.6L VVT Pentastar engines Includes 2 camshaft phaser holders and 3 timin...

Includes camshaft holding fixtures & chain tensioner hold down pin Services: Ford EcoBoost V6 engines Engine: 2.7L, 3.5L & 3.7L V6 Compon...

For VVL (Variable Valve Lift) only, do not use on VVT (Variable Valve Timing) engines Services newer Dodge/Chrysler/Jeep models with Pent...

Keeps the camshafts in position to prevent incorrect timing Use while changing the timing belt to reduce service time and prevents damage ...

Use this camshaft alignment tool on the upgraded 3.5L Ford EcoBoost engine Applications: Expedition (2018-2019), F-150 (2017-2019), Ford G...

The crank position sensor (CPS) alignment block used for servicing the alignment of the Crank Sensor on many versions of the 2.0L & 2.3L Ford ...

Services Ford EcoBoost B-Max 1.6L engines Use in conjunction with #1026 Comparable to Ford Factory Tool 303-1550 Applications Make Model Engin...

For use with #2865, 2867 & 2869 Camshaft Holders to lock the crankshaft at TDC Comparable to OEM #T40026 Application Details Make M...

Tool is used for holding the Crankshaft Damper on 2005-2011 Ford 2.0L, 2.3L & 2.5L engines Applications: Fusion, Focus, Transit, Milan, MKZ, E...

Subaru (FA & FB Engine) Crankshaft socket slips over crank snout Enables engine builder to rotate a complete engine with any 1/2" ratchet or b...

For removal and installation of the magnetic actuator Services B38 & B48 engine (1.5L & 2.0L) Compare to BMW Factory Tool #83302360895 or ...

Tool allows for easy installation of crankshaft seals onto various Cummins engines Designed for use on Cummins 4BT 3.9L, ISC 8.3L, B Series 5.9L, ...

Secure flywheel fastening and release during vibration damper screw connection tasks Ensure safe and effective flywheel securing while working on ...

Mercedes Benz M157, M276 & M278 timing tool set Designed to align the camshaft timing angle for correct position Also, for removing injectors ...

Use for aligning & holding the cams for timing chain service Pins insert into camshaft pulse plates and locks the cams in place ...

Compresses belt tensioner spring when replacing the engine drive belt and alternator Services GM 2.4L EcoTec (Hybrid) 2011-2016; Buick Regal, LaCr...

Tool holds the camshaft at T.D.C. to ensure proper timing when performing service on timing system components (cams, gears, chains, etc.) Designed...

Properly setup and service engine timing Tool locks the timing chains against the hydraulic tensioners to prevent tensioner ratcheting and pisto...

4-point design for secure and easy removal and installation of the crankshaft pulley Comfort Grip Handle for better control and reduced hand fatig...

Used for turning the crankshaft pulley Working End: 22mm square drive with 12mm rotating pivot pin Drive: Dual 1/2" Square drive & 24mm ...

Services Ford & Mazda 2.0L and 2.3L twin cam turbo engines Including 1.8L Duratec-HE (MI4), 1.8L Duratec-SCi (MI4), 2.0L Duratec-HE (MI4) Ford...

For removal & installation of 4/3-way central valve for camshaft adjustment Services 2.0L (4v) generation 1, 2 & 3 TFSI engine with chain ...