Skip to content
GET A FREE CTA T-SHIRT WHEN YOU SPEND $200! Add T-Shirt to cart to receive automatic discount.
GET A FREE CTA T-SHIRT WHEN YOU SPEND $200! Add T-Shirt to cart to receive automatic discount.
5460 - GM Belt Tension Compressor Tool

5460 - GM Belt Tension Compressor Tool

SKU 5460
$89.95 - $89.95
$89.95
$89.95 - $89.95
$89.95

Orders placed before 12:00pm EST Mon-Fri ship same day. Orders placed after 12:00pm EST ship next business day.

  • Compresses belt tensioner spring when replacing the engine drive belt and alternator
  • Services GM 2.4L EcoTec (Hybrid) 2011-2016; Buick Regal, LaCrosse, Chevrolet Malibu, Impala & Captiva
  • Compare to GM factory tool EN-48932
Make Model Year
Buick Regal 2011-2016
Buick LaCrosse 2011-2016
Chevrolet Malibu 2011-2016
Chevrolet Impala 2011-2016
Chevrolet Captiva 2011-2016


    Instructions:

    1. Locate and identify the belt tensioner pulley. It will have a spring-loaded arm that keeps tension on the serpentine belt.
    2. Position the 5460 tool against the tensioner pulley arm. The curved end should fit into the recess on the tensioner arm.
    3. Turn the handle on the tool clockwise. This will compress the spring and relieve tension on the belt.
    4. With tension relieved, slip the serpentine belt off of the pulleys.
    5. If replacing the alternator, remove the mounting bolts and electrical connections. Transfer any necessary components over to the new alternator.
    6. Install the new alternator and secure with mounting bolts. Reconnect electrical connectors.
    7. Loop the new serpentine belt over all pulleys except the tensioner pulley.
    8. Release the tension on the 5460 tool slowly to allow the tensioner pulley to re-tension the belt.
    9. Remove the 5460 tool.
    10. Check that the belt routing matches the diagram on the fan shroud or engine cover.
    11. Start engine and check that the belt is centered on all pulleys. Adjust as needed.
    Interchange

    EN-48932

    • Compresses belt tensioner spring when replacing the engine drive belt and alternator
    • Services GM 2.4L EcoTec (Hybrid) 2011-2016; Buick Regal, LaCrosse, Chevrolet Malibu, Impala & Captiva
    • Compare to GM factory tool EN-48932
    Make Model Year
    Buick Regal 2011-2016
    Buick LaCrosse 2011-2016
    Chevrolet Malibu 2011-2016
    Chevrolet Impala 2011-2016
    Chevrolet Captiva 2011-2016


      Instructions:

      1. Locate and identify the belt tensioner pulley. It will have a spring-loaded arm that keeps tension on the serpentine belt.
      2. Position the 5460 tool against the tensioner pulley arm. The curved end should fit into the recess on the tensioner arm.
      3. Turn the handle on the tool clockwise. This will compress the spring and relieve tension on the belt.
      4. With tension relieved, slip the serpentine belt off of the pulleys.
      5. If replacing the alternator, remove the mounting bolts and electrical connections. Transfer any necessary components over to the new alternator.
      6. Install the new alternator and secure with mounting bolts. Reconnect electrical connectors.
      7. Loop the new serpentine belt over all pulleys except the tensioner pulley.
      8. Release the tension on the 5460 tool slowly to allow the tensioner pulley to re-tension the belt.
      9. Remove the 5460 tool.
      10. Check that the belt routing matches the diagram on the fan shroud or engine cover.
      11. Start engine and check that the belt is centered on all pulleys. Adjust as needed.