Volvo

For pressurizing Cooling Systems All metal construction with 49mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with oth...

Remove new, plastic oil drain plugs without damage Mates perfectly with oil drain plug Widened thumb-grip allows proper torque Compare to VW Facto...

Fits into the idler pulley and turns it to release tension for replacement of the serpentine belt 3/4" square head Applications 850 (1993-1997)...

For '98 & earlier 2.5L 5 cyl. Volvos w/o CVVT Holds the camshaft in place during the timing belt replacement Made from 3/8" anodized alumin...

Takes fuel pressure on vehicles with the Schrader-type test port on the fuel rail Features 3-1/2" (90mm) gauge with dual calibration (5-145 PSI / ...

Click here for application chart of clutch tool range Spline Diameter: 15/16" Metric Spline: 23.8125 Spline Count: 22 Pilot Diameter: .590 Metric ...

Holds the engine when replacing the timing belt Aligning the camshaft and crankshaft position Services vehicles with the "VEA" 2.0L turbocharged a...

Adapter with Bayonet tabs Color: Brown/Orange Included in kit #7333 O.D. of working end: 41.25mm Application Details Make Model Engine ...

Used to counter-hold the crankshaft pulley to release and tighten center bolt Compare to Volvo Factory Tool: #999 5433 Application Details ...

Removes the ECU from the body mount on Volvo models Made from spring steel with special grooves Compare to Volvo Factory Tool #9995722 Applicatio...

For pressurizing Cooling Systems All metal construction with 64mm x 3mm threads to fit many medium and heavy duty Volvo trucks Use with CTA #7050 ...

Click here for application chart of clutch tool range Spline Diameter: 2" Metric Spline: 50.8000 Spline Count: 10 Pilot Diameter: 1.180 Metric Pil...

Click here for application chart of clutch tool range Spline Diameter: 1-3/4" Metric Spline: 44.4500 Spline Count: 10 Pilot Diameter: 0.980 Metric...

Click here for application chart of clutch tool range Spline Diameter: 1 1/2" Metric Spline: 38.1000 Spline Count: 10 Pilot Diameter: .980 Metric ...

Click here for application chart of clutch tool range Spline Diameter: 1 1/8" Metric Spline: 28.5750 Spline Count: 10 Pilot Diameter: .590 Metric ...

For removal and installation of wheel hubs and bearings on Ford, Land Rover and Volvo models Services up to 82mm diameter wheel bearings on newer ...

Flywheel barring tool helps rotate crankshaft during overhead adjustment, replacing injectors, or timing engine Services 2008-2018 Volvo ...

Used for supporting the engine when performing service on the timing system Also found in CTA No. 7066 Volvo Camshaft Alignment Kit Compare to Vol...

Kit has all the necessary components required to perform a full timing service Used for Aligning the engine camshaft position Used for Holding the...

Spline Diameter: 1" Metric Spline: 25.40 Spline Count: 22 Pilot Diameter: .59 Metric Pilot: 14.986 Precision tool for accurate alignment of ...

Used for removing and installing the fuel tank/Fuel pump retaining ring Use on many Late 90’s and early 00’s Volvo models Compare to Volvo Factory...

Services Volvo 850, 940, 940SE, 960, S60, S70, S80, V70, V70XC, XC70 & XC90 Compare to Volvo Factory tool #9995371 Because threads are very fi...