Volvo

Removes and installs the OEM Oil Filter Housing Cap on late model 2.0L 4 cylinder Volvos (Volvo OE #31321084) 85.5mm X 16 Flute Heavy duty design ...

Volvo Oil Filler Adaptor works with CTA 7471 Oil Filling funnel and all related accessories This adapter works with any Volvo model which uses the...

Used for adjusting the camshafts when performing service on the timing system Also found in CTA No. 7066 Volvo Camshaft Alignment Kit Compare to V...

For '98 & earlier 2.5L 5 cyl. Volvos w/o CVVT Holds the camshaft in place during the timing belt replacement Made from 3/8" anodized alumin...

Holds the engine when replacing the timing belt Aligning the camshaft and crankshaft position Services vehicles with the "VEA" 2.0L turbocharged a...

Fits into the idler pulley and turns it to release tension for replacement of the serpentine belt 3/4" square head Applications 850 (1993-1997)...

Takes fuel pressure on vehicles with the Schrader-type test port on the fuel rail Features 3-1/2" (90mm) gauge with dual calibration (5-145 PSI / ...

For removal and installation of wheel hubs and bearings on Ford, Land Rover and Volvo models Services up to 82mm diameter wheel bearings ...

Flywheel barring tool helps rotate crankshaft during overhead adjustment, replacing injectors, or timing engine Services 2008-2018 Volvo ...

Used for supporting the engine when performing service on the timing system Also found in CTA No. 7066 Volvo Camshaft Alignment Kit Compare to Vol...

Kit has all the necessary components required to perform a full timing service Used for Aligning the engine camshaft position Used for Holding the...

Spline Diameter: 1" Metric Spline: 25.40 Spline Count: 22 Pilot Diameter: .59 Metric Pilot: 14.986 Precision tool for accurate alignment of ...

Used for removing and installing the fuel tank/Fuel pump retaining ring Use on many Late 90’s and early 00’s Volvo models Compare to Volvo Factory...

Adapter with Bayonet tabs Color: Brown/Orange Included in kit #7333 O.D. of working end: 41.25mm Application Details Make Model Engine ...

Services Volvo 850, 940, 940SE, 960, S60, S70, S80, V70, V70XC, XC70 & XC90 Compare to Volvo Factory tool #9995371 Because threads are very fi...

Used to counter-hold the crankshaft pulley to release and tighten center bolt Compare to Volvo Factory Tool: #999 5433 Instructions Removal: Rem...

Comparable to Volvo OEM # 999 5719-3 Application List: Engine Codes B4184S10, B4184S2, B4184S3, B4184S9, B4194T2, B4204S2, B4204T2, B4204T2 CVVT, B...

Comparable to Volvo OEM # 999 5718-5 Application List: Engine Codes B4184S10, B4184S2, B4184S3, B4184S9, B4194T2, B4204S2, B4204T2, B4204T2 CVVT, B...

Comparable to Volvo OEM # 999 5718-5 Application List: Engine Codes B4184S10, B4184S2, B4184S3, B4184S9, B4194T2, B4204S2, B4204T2, B4204T2 CVVT, B...

Removes and installs the climate control blower motor Applications Make Model Year Volvo S60 2011-2016 Volvo S60L 2007-2016 Volvo S...

Remove new, plastic oil drain plugs without damage Mates perfectly with oil drain plug Widened thumb-grip allows proper torque Compare to VW Facto...

Removes the ECU from the body mount on Volvo models Made from spring steel with special grooves Compare to Volvo Factory Tool #9995722 Applicatio...

Services belts on Volvo Heavy-duty long bar with T60 Torx Bit on one end & T50 Torx Bit on other end, plus 16mm x 12-point opening built into ...

Removes the left & right fuel pump retaining nuts on late model Volvos including S60, S80, V70, V70 XC, XC70, XC90 Also services XC90 left tan...

Ball joint press tool is used to install the ball joints into the steering knuckles of your P2 chassis Volvo Includes 4 slide hammer puller adapt...

Takes fuel pressure on vehicles with Schrader-type fittings Features: 31/2" gauge (5-145 PSI / 25-1000 kPa Range) 10" (25cm) long hose with quic...

For alignment of the cam and crankshafts Allows correct installation of the camshafts with the cam cover Compare to Volvo Factory Tools: #9995451,...

64mm x 3mm threads to fit many medium and heavy duty trucks For use with CTA #7050, plus other brands Volvo Truck Radiator Adapter

Use for removing and installing the top shock retaining nut on 850, S40, C70, S60, S70, S80, V70, XC70 & XC90 models Includes holding socket a...

For alignment of the cam and crankshafts Enables correct installation of the camshaft with the cam cover Application Details Make Model Y...

Keeps the crankshaft pulley from turning when changing the timing belt and/or crankshaft seal Designed to withstand the torque specs for the crank...

Use with CTA #7400 Services Volvo vehicles with 5/16 x 24 threaded end Services some 2007 - 2012 Volvos Will work on most "Non-CTA" ATF Fillin...