Timing Tools

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Master kit includes all timing tools required to set cams, valves & VANOS timing on BMW N51, N52, N53, N54 & N55 (S55) engines Incudes cam...

Use to install the piston pin circlip on the 986 987.1 & 996 / 997.1 Found in P/N: 5018 - Porsche Cam Alignment Tool Kit & 7089 - Porsche ...

For the removal and replacement of the crankshaft bolt Used for Mercedes-Benz M271 engines Used for holding Mercedes-Benz factory part #: A 271 03...

Kit includes specialty tools required to perform timing service and repair Use to accurately locate TDC for servicing and repairing head gasket an...

Required to hold the flywheel in a secure position while servicing the balancer retaining bolt This tool allows for securing the flywheel by utili...

Use for replacing worn or damaged Automatic transmission mount The vulcanized rubber mount separates from the housing causing an increase of NVH d...

Included in #2880 - Ford Cam Lock Tool Set Compare to Ford Factory Tool 303-620 Applications Make Model Engine Years Ford Contour 2.0L DOHC ...

Alignment Bar Compare to Ford Factory Tool 303-376 Applications Make Model Engine Years Ford Fiesta 1.25L Duratec 2005-2013 Ford Fiesta 1....

19mm bushed socket to prevent slippage and rounding off of the cam bolt at the end of the camshafts Services 1980-1995 Porsche 911, 3.2L ...

Removes crank bolt on Mercedes Benz - M112, M113, M137, M156*, M275 & M285 Services: C240, C280, C320, C43 AMG, CL55 AMG, CLK320, CLK55 AMG, E...

Keeps the lower timing gear locked while the cylinder head is removed from engine Services I4, I5 & I6 (Atlas) engines Without this tool, the ...

For VVL (Variable Valve Lift) only, do not use on VVT (Variable Valve Timing) engines Services newer Dodge/Chrysler/Jeep models with Pent...

Splits and reconnects single & double row timing chains on Mercedes Benz gas and diesel engines Services M276 & M278 (2012+) Use in conjun...

Holds exhaust camshaft sprocket during timing service Services Porsche 911 Turbo (996) OAL: 25cm/250mm (9.85") Compare to Porsche Factory Tool 965...

Used for supporting the engine when performing service on the timing system Also found in CTA No. 7066 Volvo Camshaft Alignment Kit Compare to Vol...

Kit has all the necessary components required to perform a full timing service Used for Aligning the engine camshaft position Used for Holding the...

Required for the timing chain replacement on Volkswagen 12v VR6 engines Applications: MK3 & MK4 Golf (GTI), Jetta, Corrado ...

Locks camshafts and crankshaft in position when servicing the timing chain and setting engine timing A properly working timing system allows the e...

Kit includes both the Camshaft (7640X01) and Crankshaft (5050) holding brackets Designed to position and hold the camshaft and crankshaft on 1993-...

Used to setup and service engine timing for Porsche M96.03 3.6L H6 engine Services Porsche 986, 987, 996 & 997 generations Includes: Camsha...

Properly setup and service the engine timing A properly working timing system allows the engine’s valves to open and close at the proper times d...

For loosening tension on timing chains during camshaft service procedures Compare to FCA Group Factory Tool #’s 10200A & 10200-A Material: Dur...

Services the timing system on 4.0 L SOHC V6 Engine. Required for replacing the timing chain when the poorly designed original Teflon chain guides ...

For servicing both the Balance Shaft and Crankshaft on a Mercedes M651 (1.8L & 2.1L Turbocharged Diesel engine) Included kit: 1105 - Benz/Jee...

Used for creating slack on the chain tensioner for replacing the timing chain without the need for removing the front cover Necessary for pushin...

Required for proper installation of the Micro-V Stretch Belt on the A/C and Alternator Drive Avoid damage to the belt, A/C and Alternator Drive Se...

For repairing the balancer shaft, holding chain sprocket and for removing and installing the oil pump, chain, and sprocket for repair This kit in...

Aligns camshaft timing at TDC position on N20 & N26 engines Compare to BMW Factory tools: 83302212831, 83302212830, 83302219548, 83300495070 &...

3-Point design to hold the AVICS intake camshaft pulley when removing or installing the central bolt Avoid damge to central pulley Com...

12-Point design to hold the camshaft pulley while removing and/or installing central bolt Avoid damaging pulley Compare to Subaru Factory Tool #49...

Allows for removal of the SOHC cam sprockets without damaging the cam or sprocket Use for cam seal renewal, cylinder head removal, or engine te...

For alignment on 2010 & up Ford 2.0L engines Cam locking plate with special milled thickness Retaining bolt included Compare to Ford Factory T...

Kit includes timing and seal service tools for services on the 1.6L Ecoboost engine. Components included in kit: #2822 - Ford Cam Locking Plate ...