Specialty Sockets

E6 Flat-Cut E-"Star" Socket from 1469 Flat-Cut E-"Star" Socket Set The flat-face precision fit prevents rounding off flush-mount "Star" bolts Slim...

Emergency Twist & Flip Socket found in 5700 set Removes damaged & corroded nuts Socket includes both regular hex and Twist design Sizes - ...

Emergency Twist & Flip Socket found in 5700 set Removes damaged & corroded nuts Socket includes both regular hex and Twist design Sizes - ...

Emergency "Twist" Flip Socket Set includes 6 sizes Removes damaged & corroded nuts Each socket includes both regular hex and Twist design Size...

5 point EPR Torx® design Size: 18EPR Drive size: 3/8" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx...

5 point EPR Torx® design Size: 11EPR Drive size: 1/4" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx...

5 point EPR Torx® design Size: 7EPR Drive size: 1/4" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx®...

5 point EPR Torx® design Size: 6EPR Drive size: 1/4" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx®...

Extended Lug Nut Socket - 19mm. Found in kit 7069. Protective outer sleeve and insert protects polished wheels and lug nuts from damage. The extra-...

120mm long socket for extra-deep reach 20mm hex with deep broach 1/2" Drive 27.55mm OD (excluding Drive Diameter) Applications: Suspension fasten...

14mm Straight Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

13mm Offset Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

5 Pt. x 12.5mm Socket - Female Chrome-vanadium construction for durability 1/2" Square Drive Included in CTA #2752 and #7394

Go-Thru Deep Socket - 22mm

Go-Thru Deep Socket - 21mm

6 Pt. x 8mm Socket - Short 3/8" Square Drive

Services elliptical-shaped fasteners now found on many vehicle applications Standard "Star" or Ribe designs will not fit these fasteners Black fin...

Use for removing and installing the top shock retaining nut on 850, S40, C70, S60, S70, S80, V70, XC70 & XC90 models Includes holding socket a...

Services FWD VW & Audi with top shock-retaining nut recessed inside the strut tower Tool's center bore holds the strut shaft to keep from turn...

Chrome Moly color-coded socket with anodized finish Protective plastic sleeve prevents scratching of wheels and lug nuts Internal ma...

For servicing recessed wheel nuts 1/2" drive in center allows socket to "flip" from one size to another OAL: 3" (76mm) Size: 3/4" x 13/16" Extra ...

For removing and installing front hub/axle nuts 1/2" square drive Size: 36mm Point: 6 Applications include, but are not limited to: 2001 Jeep Ch...

For removing and installing front hub/axle nuts 1/2" square drive Size: 35mm Point: 6

For removing & installing front hub/axle nuts & injectors Size: 30mm Point: 12 1/2" square drive OAL: 78mm / Depth: 50mm  Applications: A...

For removing and installing front hub/axle nuts 1/2" square drive Size: 30mm Point: 6 Safe for Impact usage

For removing and installing front hub/axle nuts 1/2" square drive 27mm X 6 Point

For removing and installing front hub/axle nuts 1/2" square drive Size: 24mm Point: 6

2-piece design for high-torque applications 5-point head and tamper-hole for security fasteners Size: TS15 Drive: 1/4"

EP design services elliptical-shaped fasteners now found on many vehicle applications Standard "Star" or Ribe designs will not fit these fasteners...

Designed for BMW cylinder head bolts 1/2" square drive bits are extra long (OAL 230mm) Allows access to reach down and remove stubborn cylinder he...

Sizes: M0, M1, M2, M3, M4, all 3/8" square drive, all packed on socket rail Bits have asymmetrical geometry that provides enhanced installation of...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E24 - OAl 73mm 1/2" ...

Special 74.5 diameter for many import and domestic applications Deep-reach design for proper fitment Die-cast aluminum forging provides extra sten...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E8 - OAL 42mm 1/4" D...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E5 - OAL 42mm 1/4" D...

4" / 102mm long for deep-reach applications 2-piece construction for high torque applications 1/2" drive Size: 12mm MADE IN USA