Specialty Sockets

Services rear axle hub bearing retaining nut on heavy duty RAM trucks Services rear hubs with 12 pins on RAM 2019+ 3500, 4500, 5500 (D2, DD, DP) C...

Extra Low-profile (21.15mm height) required for minimal clearance Services 6.7L Dodge RAM Cummins fuel filter canister (2010+) & RAM 3.0L EcoD...

Full-range deep metric socket set Sizes 6mm to 21mm 120mm long Broached for extra-deep reach Provides access to recessed areas with extra long bol...

"Double-D" socket holds shock piston stem while deep socket is used to remove the nut Internal dimensions: .33"(8mm) long x .25"(6mm) wi...

Services elliptical-shaped fasteners now found on many vehicle applications Standard "Star" or Ribe designs will not fit these fasteners Black fin...

7 Point socket for caliper retaining screws Applications: Audi Q7, S5 and various Mercedes Benz models 1/2" square drive OAL: 50mm Applications ...

Low-profile E20 Torx® socket removes and installs the low-profile bolts found on Nissan QR25's with automatic transmissions 1/2" drive ...

Included Sizes: 8mm x 10-point and 10mm x 10-point sockets Applications: Designed for 2009 and newer Honda Odyssey, Pilot, and other Honda seat tr...

Set of EPR (5-sided) Torx Plus® profile sockets, from 6EPR to 32EPR Also referred to as Pentalobe sockets Manufactured from satin finish chrome va...

Services: Transfer cases Engine oil pans, Manual transmission Differential drain plugs Fill plugs Size: 10mm Drive: 3/8" Essential for every ...

Comprehensive "Flip" socket set offering two hex sizes in one socket. Half metric sizes for the removal of inflated, warped and mangled chrome-ca...

Stubby design for clearance when servicing Transfer Case/Transmission fill plugs on 2012 & up Jeep Wrangler w/ 6 speed manual transmission (NS...

Service head bolts on Jaguar & Land Rover 1/2" square drive and 4-1/4" (10.7cm) OAL long for deep-reach applications Ribe wrenches will also s...

5 point EPR Torx® design Size: 22EPR Drive size: 1/2" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx...

Unique design provides interchangeable wrench sizes Flexes up to 45° to grip the direct fuel line from any angle Provides ability to tighten and ...

For service of 10mm male square plugs 3/8" Square drive OD of 10mm end: 18.2mm OD of 3/8" sq. dr. end: 18.9mm OAL: 40mm  Applications: BMW, Ford, ...

5 point EPR Torx® - Lobe socket design Size: 10EPR - 5Pt. Lobe Drive size: 1/4" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with ...

Features patented reverse tapered thread to remove stripped lug nuts or lug nuts with missing keys Fits lug nuts measuring 19mm "point-to-point" U...

Use for Installation and removal of head bolts on Subaru flat boxer engines Services: 1999-2020 Subaru Baja, Forester, Impreza, Legacy, O...

15 Pc comprehensive set offers a wide range of sizes Services elliptical-shaped "Star" Plus fasteners found on many vehicles Applications (Not li...

10 Point x 19mm socket services selected Honda & Acura rear trailing arms 1/2" Square drive Applications Applications include but are not lim...

5 point EPR Torx® design Size: 14EPR Drive size: 3/8" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx...

2-piece design for high-torque applications 5-point head and tamper-hole for security fasteners Size: TS30 Drive: 1/4"

10 Point socket for caliper retaining screws on Porsche Cayenne & Audi Q7 models 3/8" square drive OD: 11.5mm Length 50mm Application Details...

Special configuration with 6 internal slots to service timing belt tensioner Required when replacing the idler Use with 1/2” square or 7/8” hex dr...

Services: Transfer cases Engine oil pans Manual transmission Differential drain plugs Fill plugs Size: 8mm Drive: 3/8" Essential for every me...

Designed to service 19mm & 21mm lug nuts found on many Dodge, Chrysler, Jeep, Ford, Lincoln, GM, Toyota & More Two of the most commonly us...

For elliptical-shaped Torx Plus® fasteners Torx Plus® will not fit standard Torx® fasteners Standard Torx® tools will strip if used in Torx Plu...

1/2" Drive Socket Extension Use with any 1/2" drive socket Great for use with flip sockets Included in kits: 1190 1463 5700 7307 Supersedes 14...

10 point bit socket services Tuner Lug Nuts and some import OE Lug Nuts Bit-in-socket design for extra torquing power Deep reach 5" / 125mm long P...

120mm long socket for extra-deep reach 19mm hex with deep broach 1/2" Drive Applications: Lugs, Sensors, Suspension fasteners, etc.

Special design for injectors on small diesel engines 5 Point (Pentagon) Length: 36.85mm Chrome-vanadium construction for durability Broach depth:...

Nylon rails are pre-printed with socket sizes for easy identification Features 13 recessed springs to hold the socket Rails include mounting holes...

For elliptical-shaped Torx Plus® fasteners Torx Plus® will not fit standard Torx® fasteners Standard Torx® tools will strip if used in Torx Plus® ...

Removes later style central valve on BMW Vanos Hubs and Ford VCTs Services BMW/MINI B36 (1.5L), B38 (1.2L & 1.5L), B48 (2.0L), B58 (3.0L) &...

New 5 point Torx® design found in many new vehicles 5 Point EPR Torx® sockets sizes: #5065X12 - 12EPR #5065X14 - 14EPR #5065X16 - 16EPR #5065X1...