Specialty Sockets

Specially designed socket for the installation and removal of injector lines & exhaust gas temperature (EGT) sensors 6 point (Hex) design Prev...

Designed for servicing Nissan, Toyota, Honda models, and Ford Explorer, Ranger, F-150/F-250 Drive Shaft Universal Joint Flange Bolts 12mm x 12 Pt....

Use for servicing all kinds of pickup truck bed fasteners Includes the following Torx, Torx Plus & External Torx Plus sockets and bits Sizes i...

Socket is used for turning the camshafts during engine timing service Services: M133, M176, M178, M264, M270 & M274 engines Use with ½” square...

E18 Flat-Cut E-"Star" Socket from 1469 Flat-Cut E-"Star" Socket Set The flat-face precision fit prevents rounding off flush-mount "Star" bolts Sli...

E11 Flat-Cut E-"Star" Socket from 1469 Flat-Cut E-"Star" Socket Set The flat-face precision fit prevents rounding off flush-mount "Star" bolts Sli...

E6 Flat-Cut E-"Star" Socket from 1469 Flat-Cut E-"Star" Socket Set The flat-face precision fit prevents rounding off flush-mount "Star" bolts Slim...

Emergency Twist & Flip Socket found in 5700 set Removes damaged & corroded nuts Socket includes both regular hex and Twist design Sizes - ...

Emergency Twist & Flip Socket found in 5700 set Removes damaged & corroded nuts Socket includes both regular hex and Twist design Sizes - ...

Emergency "Twist" Flip Socket Set includes 6 sizes Removes damaged & corroded nuts Each socket includes both regular hex and Twist design Size...

5 point EPR Torx® design Size: 18EPR Drive size: 3/8" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx...

5 point EPR Torx® design Size: 11EPR Drive size: 1/4" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx...

5 point EPR Torx® design Size: 7EPR Drive size: 1/4" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx®...

5 point EPR Torx® design Size: 6EPR Drive size: 1/4" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx®...

Protective outer sleeve and insert protects polished wheels and lug nuts from damage The extra-long 150mm socket is safer & more accurate than...

Extended Lug Nut Socket - 19mm. Found in kit 7069. Protective outer sleeve and insert protects polished wheels and lug nuts from damage. The extra-...

120mm long socket for extra-deep reach 20mm hex with deep broach 1/2" Drive 27.55mm OD (excluding Drive Diameter) Applications: Suspension fasten...

14mm Straight Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

13mm Offset Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

10mm Super Stubby XZN Socket

Go-Thru Deep Socket - 22mm

Go-Thru Deep Socket - 18mm

Go-Thru Deep Socket - 21mm

LIMITED TIME BOGO - BUY ONE 4223, GET TWO 4223 FREE 12 point semi deep mini flip sockets with ¼” drive include two hex sizes in each. Each pairing ...

Services elliptical-shaped fasteners now found on many vehicle applications Standard "Star" or Ribe designs will not fit these fasteners Black fin...

Use for removing and installing the top shock retaining nut on 850, S40, C70, S60, S70, S80, V70, XC70 & XC90 models Includes holding socket a...

Services FWD VW & Audi with top shock-retaining nut recessed inside the strut tower Tool's center bore holds the strut shaft to keep from turn...

For servicing recessed wheel nuts 1/2" drive in center allows socket to "flip" from one size to another OAL: 3" (76mm) Size: 3/4" x 13/16" Extra ...

For removing and installing front hub/axle nuts 1/2" square drive Size: 38mm Point: 6

For removing and installing front hub/axle nuts 1/2" square drive Size: 36mm Point: 6 Applications include, but are not limited to: 2001 Jeep Ch...

For removing and installing front hub/axle nuts 1/2" square drive Size: 35mm Point: 6

For removing & installing front hub/axle nuts & injectors Size: 30mm Point: 12 1/2" square drive OAL: 78mm / Depth: 50mm  Applications: A...

For removing and installing front hub/axle nuts 1/2" square drive 27mm X 6 Point

For removing and installing front hub/axle nuts 1/2" square drive Size: 24mm Point: 6

2-piece design for high-torque applications 5-point head and tamper-hole for security fasteners Size: TS20 Drive: 1/4"

2-piece design for high-torque applications 5-point head and tamper-hole for security fasteners Size: TS15 Drive: 1/4"