Specialty Sockets

For removing and installing front hub/axle nuts 1/2" square drive Size: 33mm Point: 6

For removing and installing front hub/axle nuts 1/2" square drive Size: 32mm Point: 12 Comparable to OEM # 11 6 462

For removing and installing front hub/axle nuts 1/2" square drive Size: 32mm Point: 6

For removing and installing front hub/axle nuts 1/2" square drive Size: 30mm Point: 6 Safe for Impact usage

For removing and installing front hub/axle nuts 1/2" square drive Size: 29mm Point: 6

2-piece design for high-torque applications 5-point head and tamper-hole for security fasteners Size: TS10 Drive: 1/4"

EP design services elliptical-shaped fasteners now found on many vehicle applications Standard "Star" or Ribe designs will not fit these fasteners...

Services elliptical-shaped fasteners now found on many vehicle applications Standard "Star" or Ribe designs will not fit these fasteners Black fin...

Services elliptical-shaped fasteners now found on many vehicle applications Standard "Star" or Ribe designs will not fit these fasteners Black fin...

Mortorq Socket Size: "3" 3/8" square drive Also available in a set of 5 - CTA Part # 8140

Mortorq Socket Size: "2" 3/8" square drive Also available in a set of 5 - CTA Part # 8140

Mortorq Socket Size: "1" 3/8" square drive Also available in a set of 5 - CTA Part # 8140

Mortorq Socket Size: "0" 3/8" square drive Also available in a set of 5 - CTA Part # 8140

5 Pc. XZN Socket Set w/ Extra-Long Shaft High quality, Made in USA, w/ 2 Pc. Bit-in-Socket construction MADE IN USA Components CTA # SIZE D...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E7 - OAL 42mm 1/4" D...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E6 - OAL 42mm 1/4" D...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E4 - OAL 42mm 1/4" D...

4" / 102mm long for deep-reach applications 2-piece construction for high torque applications 1/2" drive Size: 14mm MADE IN USA

T70 1/2" Drive Applications: Subaru WRX '04 - '09 5MT, Legacy '03 - up 5MT, Forester '03 - up 5MT, 2007 STI Clutch side transmission bolt GM: Ser...

12 point semi deep mini flip sockets with ¼” drive include two hex sizes Designed to reduce work time OAL: 1.5" (38cm) Size: 13mm...

12 point semi deep mini flip sockets with ¼” drive include two hex sizes Designed to reduce work time OAL: 1.5" (38cm) Size: 9mm/...

Applications: Mack E7 and Cat 3208 Dimensions: 8 Splines x 1.725”(43.815mm) Compare to Factory Tool #0508477 1/2" Square Drive Application Detail...

Designed for quick removal and installation of Mack kingpin caps on 10,500, 12,000 lb axles using either a pneumatic impact Wrench or a breaker ba...

10 Point socket for caliper retaining screws 1/2" square drive OD: 20mm Length 50mm Applications Make Model ...

10 Point socket for caliper retaining screws on Porsche Macan, Cayenne, Audi Q7 & S8 models Visit ctatools.com for application details 3/8" sq...

Extra Low-profile (21.15mm height) required for minimal clearance Chrome-vanadium steel for extra strength 3/8” square drive Services Fleetgua...

Designed to Service BMW, Ford, Mercedes, MINI, Nissan, Infiniti, Subaru, Toyota, Scion, Kawasaki, Yamaha, Honda (Motorcycles), Suzuki, Ducati &am...

Adjusts VANOS to far left stop when adjusting valve timing or assembling 2 pin design with hex drive Use with CTA 2894 - BMW Timing Tool Kit

Services U-Joints on 80s & up Mustang, Crown Vic, Taurus, Explorer, Ranger, F150 & Mercury equivalents Chrome Vanadium socket is 1...

Applications: Rear Axle & Front Axle applications on Light-Duty Trucks 1/2" drive tools Size: 2-1/2" 6-Point

Applications: Dodge Trucks w/ Dana 60 Manual Hubs (1990-1993) 1/2" drive tools Size: 2-9/16" Rounded 6-Point

Applications: Ford Rangers & Bronco II's w/ Automatic Locking Hubs (1984-1992) 1/2" drive tools Size: 2-3/8" 6-point

Applications: 3/4 & 1-Ton Ford F250, F350 & F550, Trucks w/ Automatic Locking Hubs 1/2" drive tools Size: 2-3/...

Applications: Ford F-series, full size Broncos w/ Automatic Locking Hubs (1995-2001) 1/2" drive tools Size: 2-1/2" Ro...

Applications: Ford F-series Heavy-Duty 3/4 & 1 ton 4WD trucks (1978-1984) GM 3/4 & 1 ton 4WD trucks (1973-1981) ...

1/2" square drive Applications: Ford Ranger, Bronco II & Explorer w/ manual hubs (1993+) Ford F-series 1/2, 3/4 &...