Engine Service

Counter-weighted design for high torque applications, including: Mercedes Benz (Can be used with CTA 3998 for Benz Applications) Nissan/Infinit...

Services Ford & Mazda 2.0L and 2.3L twin cam turbo engines Including 1.8L Duratec-HE (MI4), 1.8L Duratec-SCi (MI4), 2.0L Duratec-HE (MI4) Ford...

1.5D Honda Head repair Inserts (5 Pc.) Longer thread inserts for maximum thread engagement Threads specifically designed for Honda, T...

Counter-weighted design for high torque applications, including: Subaru, Toyota, Isuzu, Kia, Nissan, BMW, Dodge, Ford & Jeep OAL: 89mm Use...

Service head bolts on many VW & Audi models 1/2" square drive and 5-1/2" (14cm) long for deep-reach applications Ribe wrenches will also servi...

Replaces valve springs and valve stem oil seals without the need to remove the cylinder head Applications include, but not limited too: BMW, MI...

Use for aligning the camshaft timing angle to correct position Services Mercedes Benz (60°) V6 engine from 2011-2019 Compare to Mercedes Benz Fact...

Porsche Camshaft Tool Kit - 911 & 914/916. Porsche Camshaft Tool Kit includes: 3762 - Porsche Cam Turning Wrench - 911 & 914/916 - Porsch...

Porsche Cam Turning Wrench has a deep double-D shape cavity for servicing classic models It is required for countering the camshaft while simultan...

Use for removing fuel injectors from BMW/MINI vehicles Services B38 (1.5L), B48(2.0L) & B58(3.0L) Engines Alignment plate and injector adapter...

Use for disassembly of counterbalance shaft gears Pressed on gear can only be removed with this tool Use with standard open-end 24mm hex wrench Se...

Sanding Papers Diameter 16mm (Set of 10)

Lock Pin - Thin Compare to Ford Factory Tool 303-507 Applications Make Model Engine Years Ford Escape 2.3L DOHC 4V I4 2005-2012 Ford Fusio...

Use for aligning & holding the cams for timing chain service Pins insert into camshaft pulse plates and locks the cams in place ...

Compresses belt tensioner spring when replacing the engine drive belt and alternator Services GM 2.4L EcoTec (Hybrid) 2011-2016; Buick Regal, LaCr...

Use this camshaft alignment tool on the upgraded 3.5L Ford EcoBoost engine Applications: Expedition (2018-2019), F-150 (2017-2019), Ford G...

Tool holds the camshaft at T.D.C. to ensure proper timing when performing service on timing system components (cams, gears, chains, etc.) Designed...

Properly setup and service engine timing Tool locks the timing chains against the hydraulic tensioners to prevent tensioner ratcheting and pisto...

Tool kit is designed to service the engine timing system on Porsche 986, 987.1, 996, & 997.1 models The entire kit comes packed in a custom b...

Rotates camshaft for adjusting the engine timing or tightening the timing chain Applications: Audi A6, A7 & A8 equipped with the V8 4.0L TFS...

Used for aligning the position of the camshaft pulley T100 x 1/2"Dr. Made of Durable, high quality Carbon Steel Compare to Mercedes Benz Factory T...

For servicing the Camshafts and the Timing Chain during Installation & Removal on Mercedes Benz (3.0L CDi Diesel engine) Included in kit: ...

4-point design for easy removal and installation of crankshaft pulley Comfort Grip Handle Applications include: Subaru Forester (2011 & Up) W...

A must for removing and installing serpentine belts with spring-loaded idler pulleys 23” long slender design provides proper reach and prevents ...

Kit combines CTA: 1068 - Crank Bolt Socket - 27mm Use for easily breaking loose crank bolts Counter-weighted design for high torque application...

Services Ford EcoBoost B-Max 1.6L engines Use in conjunction with #1026 Comparable to Ford Factory Tool 303-1550 Applications Make Model Engin...

For assembly and disassembly of pulleys on camshaft, vibration and oil pump Includes 2 sets of pins, one with 3-steps for a total of 4 dia...

Fits into the idler pulley and turns it to release tension for replacement of the serpentine belt 3/4" square head Applications 850 (1993-1997)...

2 long-handled (22" / 55cm) wrenches, with special bends, to service late model Mini Coopers N12, N14, N16, & N18 engine R50, R52, R53, R55,...

For '98 & earlier 2.5L 5 cyl. Volvos w/o CVVT Holds the camshaft in place during the timing belt replacement Made from 3/8" anodized alumin...

Includes jig to align camshafts during assembly Includes TDC pin to align the flywheel Services BMW M42, M44, M50, M52, M52TU, M54, M56, S50(US) &...

Toyota Timing Belt Tensioner Compressor Allows for easy belt replacement For 95 & Up T100, Tacoma & 4 Runner trucks Internal nut to ex...

Application: Passenger Cars Depth: 3" (75mm) Range: 60 - 175mm Features ratchet mechanism with square drive tools to adjust diamet...

Removes harmonic balancers without tapped holes Services V6 & V8: GM (5.3L, 5.7L 6.0L, 6.2L & 7.0L) Chrysler, Dodge & Jeep (3.5L, 3.7...

Sockets are designed to install and remove Exhaust Gas Temperature sensors on cars & trucks without damaging connection wire, housing, sensor ...

Used to remove and install the intake manifold of a 2.0L 4V Turbocharged common rail TDI engine 10mm Triple Square (XZN) Ball End Applications:...

Counter-weighted design for high torque applications, including: 21mm hex pulley damper bolts on Chevy, Chrysler, Dodge, Ford, GM, Jeep and Mazd...

Counter-weighted design for high-torque applications Services Honda, Kia and others with 17mm applications Use with 1/2" square drive tools

For replacing the fuel filter or servicing the water sensor without damage to parts. Services '01 - '11 6.6L Duramax diesel engines. 1...

140mm long wrench with T60 Torx® end features machined shaft to allow proper clearance to service Dual Mass Flywheel Mount Bolts, as they are off-...

Service head bolts on many VW, Audi, Jaguar & Land Rover 1/2" square drive and 4-1/4" (10.7cm) long for deep-reach applications Ribe wrenches ...

Service head bolts on many VWs and Audis 1/2" square drive and 4-1/4" (10.7cm) OAL long for deep-reach applications Ribe wrenches will also servic...

Removes and installs 22mm Oxygen Sensors that cannot be accessed with standard sockets 1/2" square drive & 1" hex drive OAL: 31/2”...

Kit contains everything required to perform timing service on 3.5L EcoBoost engines It also services some 3.5L Duratec (non-turbo), 2.7L & 3.7...

Master kit for servicing the front and rear crankshaft seals on 2001-2016 6.6L Duramax diesel engines Includes: 3878 Rear Crankshaft Seal Install...

Replacement L-Pin with loop and 90 degree angle is used in kits: 5000 5001 5006 1205