Audi

Special oval shaped bit end services Suspension Strut Housing Nuts found on mostly newer VW & Audi models After removing pinchb...

Extra-thin shaft with short hook removes interior lighting shades, interior lining, and more for many VW/Audi vehicles Hard plastic handle with ha...

Adapter 1/4 turn Thread Color: Light Blue Included in kit #7480, #7499, #7900 & #7333 O.D. of working end: 45.20mm Applications Make Model...

Services 2.0L EA888 Gen.4 VAG engines Applications: 2020+ Adapter is held in place with O-ring grip Adapter Color: White O.D. of working end: 37.5...

Used for turning the crankshaft pulley Working End: 22mm square drive with 12mm rotating pivot pin Drive: Dual 1/2" Square drive & 24mm ...

For use with #2865, 2867 & 2869 Camshaft Holders to lock the crankshaft at TDC Comparable to OEM #T40026 Application Details Make M...

Use with CTA #7400 Services Audi vehicles with S Tronic Transmission Will work on all standard ATF filling Tanks Applications:...

Removes and installs the 139mm fuel gauge sending unit retainer nut Applications: VW VR6 Engine, Audi A4 and A6 models & Porsche 996 and 986...

14mm x 12-point XZN socket with tamper-proof head services various '03 & up VW, Audi, and Porsche Axle Bolts, Differential Bolts, and Transmi...

Use with CTA #7400 Will work on most "Non-CTA" ATF Filling System Tanks For use on VW/Audi Sport Differential (Haldex) Application Details ...

Gravity fill tool is designed to service the Haldex/Performance Differential Found in VW/Audi vehicles with the VAQ system Hose assemble featur...

Used for replacement of actuator with position sender for charge pressure actuator Use on 2.0L Diesel Common Rail engine Compare to VW/Audi Factor...

Services Audi 4.2L V8 engines Includes: 2872 - TDC Lock Pin Tool (#T40026/T40069) 2879 - Camshaft locking bars (#T40046) 1722 - Audi Se...

Designed to fit triangular profile, tamperproof fixings on Volkswagen/Audi Tdi engines, Bosch injector, and other light fittings Replace p...

Services Camshaft Adjuster (#10 Polydrive) bolts, where clearance is critical Bolts are found at the back of the engine-bay near the firewall 9mm ...

Remove new, plastic oil drain plugs without damage Mates perfectly with oil drain plug Widened thumb-grip allows proper torque Compare to VW Facto...

Rotates & holds intake camshaft during timing chain service on TFSI engines 3/8" square drive Compare to Factory Tool #T10567 & #40266 Ap...

For removal & installation of 4/3 way central valve for camshaft adjustment on 1.8 & 2.0 generation 1, 2 & 3 TFSI engines 3 sizes with...

Adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tension adjustment ...

2-pin wrench adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tensio...

Special bars lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC ...

Special bars lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC ...

Use with CTA #7400 ATF Filling Adapter VW Audi Porsche Land Rover Jaguar Will wo...

Services oil and transmission drain plugs and other fasteners Tamperproof socket 1/2" Square drive Size: 16mm, 12 Point Applications: VW, Aud...

Click here for application chart of clutch tool range Spline Diameter: 13/16" Metric Spline: 20.6375 Spline Count: 24 Pilot Diameter: .580 Metric ...

12 Pt. x 14mm Socket - Tamper Use for removal of caliper bolts, struts & axle flanges from transmission Services: VW/Audi Applications: 2006-2...

For removal and installation of coolant pump thermostat Services VW/Audi 1.4L direct injection turbo engine 3/8” Drive Compare ...

Used for pulling the ignition coils off many VW/Audi (VAG) gasoline engines Many of these coil pack boots are prone to damage when removed incorre...

Used for removing plastic drain plugs found on many late model vehicles Will NOT damage drain plugs Adapter is marked with the #1 for identificati...

Used when assembling crankshaft PTFE seal & flywheel end Provides proper installation of rear main seal For 2008 - 2017 vehicles with TSI engi...

Fuel pump wrench removes and installs fuel pump on Volkswagen and Audi vehicles Extra-long offset handle for proper reach and access A...

For assembly and disassembly of pulleys on camshaft, vibration and oil pump Includes 2 sets of pins, one with 3-steps for a total of 4 dia...

Holds camshaft for removal and installation of the timing belt and diesel injection pump? All steel construction Applications: Volkswagen &a...

Sets the camshaft timing without the need to remove the cam cover Compatible with Volkswagen/Audi 1.9SDi/Tdi Diesel Engines Applications include: ...

Sets timing in 2.5L, 3.2L, 4.2L, & 5.2L engines Includes 2 steel locking clamps with set of threaded bolts for locking camshafts when settin...

Locks camshafts in place during timing service on various '01 & up VW, Audi & Porsche vehicles Precision cut Engines: 2.8L (AXK) (BDF), 3....