Audi

7 Point socket for caliper retaining screws Applications: Audi Q7, S5 and various Mercedes Benz models 1/2" square drive OAL: 50mm Applications ...

Extra-thin shaft with short hook removes interior lighting shades, interior lining, and more for many VW/Audi vehicles Hard plastic handle with ha...

Services: 1.5L (EA211) & 2.0L (EA888) Gen.4 VAG engines Applications: 2020+ Adapter is held in place with O-ring grip Adapter Color: White O.D...

Adapter 1/4 turn Thread Color: Light Blue Included in kit #7480, #7499, #7900 & #7333 O.D. of working end: 45.20mm Services: VAG Applications...

Special oval shaped bit end services Suspension Strut Housing Nuts found on mostly newer VW & Audi models After removing pinchb...

For use with #2865, 2867 & 2869 Camshaft Holders to lock the crankshaft at TDC Comparable to OEM #T40026 Application Details Make M...

Remove new, plastic oil drain plugs without damage Mates perfectly with oil drain plug Widened thumb-grip allows proper torque Compare to VW Facto...

Used for turning the crankshaft pulley Working End: 22mm square drive with 12mm rotating pivot pin Drive: Dual 1/2" Square drive & 24mm ...

I.D. = 44.2mm O.D. = 57mm Applications: BMW / Audi Nitto fitting size: 1/2" / Threads: 1/8" BSP

Use with CTA #7400 Services: VW-DSG & Audi- S Tronic Automatic Transmissions Will work on all standard ATF filling Tanks Applications: Audi A...

Releases the Lower Ball Joint Services Audi A4 ('09 & up), A5 ('08 & up), A6 ('12 & up), A7 ('10 & up), Q5 ('09 & up) Allow...

For pressurizing Cooling Systems All metal construction with 63mm x 3mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with other...

7 Point socket for caliper retaining screws on Audi S4 & S5 models 1/2" square drive Length 48mm Applications Make Model Year Audi ...

Use with CTA #7400 Services VW, Audi & Mini vehicles with 10 x 1.0 threaded end ATF Filling Adapter Will work on most "Non-CTA...

Used for pulling the ignition coils off many VW/Audi (VAG) gasoline engines Many of these coil pack boots are prone to damage when removed incorre...

Services Camshaft Adjuster (#10 Polydrive) bolts, where clearance is critical Bolts are found at the back of the engine-bay near the firewall 9mm ...

For VAG 1.9L & 2.0L TDI PD DOHC Engines found on Audi A4, A6, VW Golf, Jetta and Touareg Models Includes: 2 Crankshaft Holders and complete se...

Special bars lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC ...

Securely holds wheel during removal and installation onto the wheel hub Threads into the Wheel Hub for vehicles that use Lug Bolts instead of whe...

Locks crankshaft and camshafts in place to set and hold precise engine timing Allows proper camshaft and pulley torquing without losing set positi...

This Funnel kit combines the necessary tools used for servicing Volkswagen, Audi, & Porsche Includes: 7471 - Oil Filling Funnel 7469 - Oil Co...

Removes and installs the 139mm fuel gauge sending unit retainer nut Applications: VW VR6 Engine, Audi A4 and A6 models & Porsche 996 and 986...

Rotates camshaft for adjusting the engine timing or tightening the timing chain Applications: Audi A6, A7 & A8 equipped with the V8 4.0L TFS...

Used when assembling crankshaft PTFE seal & flywheel end Provides proper installation of rear main seal For 2008 - 2017 vehicles with TSI engi...

Used for replacement of actuator with position sender for charge pressure actuator Use on 2.0L Diesel Common Rail engine Compare to VW/Audi Factor...

Rotates & holds intake camshaft during timing chain service on TFSI engines 3/8" square drive Compare to Factory Tool #T10567 & #40266 Ap...

All the tools needed to service '09 & up models with turbo engines - TFSI Includes crank counter hold tool, crankshaft thrust piece, (4) drift...

14mm x 12-point XZN socket with tamper-proof head services various '03 & up VW, Audi, and Porsche Axle Bolts, Differential Bolts, and Transmi...

Adjustable handle position allows the tension to be applied directly to the idler roller even with limited access Pins on tool engage the offset...

Use with CTA #7400 ATF Filling Adapter VW Audi Porsche Land Rover Jaguar Will wo...

Use with CTA #7400 Thread size: M10 x 1.0  Will work on most "Non-CTA" ATF Filling System Tanks For use on VW/Audi Sport Differential (Haldex) Ap...

Services oil and transmission drain plugs and other fasteners Tamperproof socket 1/2" Square drive Size: 16mm, 12 Point Applications: VW, Audi, Po...

Designed for checking and setting timing, as well as counter-holding the oil pump and camshaft chain sprocket during maintenance tasks on VW 2.0T ...

Services late model Volkswagen, Audi & Porsche (VAG) vehicles fitted with electronic parking brakes that use an electronic solenoid to apply t...