Audi

Services: 1.5L (EA211) & 2.0L (EA888) Gen.4 VAG engines Applications: 2020+ Adapter is held in place with O-ring grip Adapter Color: White O.D...

7 Point socket for caliper retaining screws Applications: Audi Q7, S5 and various Mercedes Benz models 1/2" square drive OAL: 50mm Applications ...

Special oval shaped bit end services Suspension Strut Housing Nuts found on mostly newer VW & Audi models After removing pinchb...

Extra-thin shaft with short hook removes interior lighting shades, interior lining, and more for many VW/Audi vehicles Hard plastic handle with ha...

Adapter 1/4 turn Thread Color: Light Blue Included in kit #7480, #7499, #7900 & #7333 O.D. of working end: 45.20mm Services: VAG Applications...

Used for turning the crankshaft pulley Working End: 22mm square drive with 12mm rotating pivot pin Drive: Dual 1/2" Square drive & 24mm ...

Remove new, plastic oil drain plugs without damage Mates perfectly with oil drain plug Widened thumb-grip allows proper torque Compare to VW Facto...

For use with #2865, 2867 & 2869 Camshaft Holders to lock the crankshaft at TDC Comparable to OEM #T40026 Application Details Make M...

7 Point socket for caliper retaining screws on Audi S4 & S5 models 1/2" square drive Length 48mm Applications Make Model Year Audi ...

Use with CTA #7400 Services: VW-DSG & Audi- S Tronic Automatic Transmissions Will work on all standard ATF filling Tanks Applications: Audi A...

Removes and installs the 139mm fuel gauge sending unit retainer nut Applications: VW VR6 Engine, Audi A4 and A6 models & Porsche 996 and 986...

Rotates camshaft for adjusting the engine timing or tightening the timing chain Applications: Audi A6, A7 & A8 equipped with the V8 4.0L TFS...

Services Camshaft Adjuster (#10 Polydrive) bolts, where clearance is critical Bolts are found at the back of the engine-bay near the firewall 9mm ...

All the tools needed to service '09 & up models with turbo engines - TFSI Includes crank counter hold tool, crankshaft thrust piece, (4) drift...

I.D. = 44.2mm O.D. = 57mm Applications: BMW / Audi Nitto fitting size: 1/2" / Threads: 1/8" BSP

14mm x 12-point XZN socket with tamper-proof head services various '03 & up VW, Audi, and Porsche Axle Bolts, Differential Bolts, and Transmi...

Special bars lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC ...

Use with CTA #7400 ATF Filling Adapter VW Audi Porsche Land Rover Jaguar Will wo...

Use with CTA #7400 Will work on most "Non-CTA" ATF Filling System Tanks For use on VW/Audi Sport Differential (Haldex) Application Details ...

Used for pulling the ignition coils off many VW/Audi (VAG) gasoline engines Many of these coil pack boots are prone to damage when removed incorre...

Gravity fill tool is designed to service the Haldex/Performance Differential Found in VW/Audi vehicles with the VAQ system Hose assemble featur...

Used when assembling crankshaft PTFE seal & flywheel end Provides proper installation of rear main seal For 2008 - 2017 vehicles with TSI engi...

Used for replacement of actuator with position sender for charge pressure actuator Use on 2.0L Diesel Common Rail engine Compare to VW/Audi Factor...

Services Audi 4.2L V8 engines Includes: 2872 - TDC Lock Pin Tool (#T40026/T40069) 2879 - Camshaft locking bars (#T40046) 1722 - Audi Se...

Designed to fit triangular profile, tamperproof fixings on Volkswagen/Audi Tdi engines, Bosch injector, and other light fittings Replace p...

Holds camshaft for removal and installation of the timing belt and diesel injection pump? All steel construction Applications: Volkswagen &...

Rotates & holds intake camshaft during timing chain service on TFSI engines 3/8" square drive Compare to Factory Tool #T10567 & #40266 Ap...

For removal & installation of 4/3 way central valve for camshaft adjustment on 1.8 & 2.0 generation 1, 2 & 3 TFSI engines 3 sizes with...

Releases the Lower Ball Joint Services Audi A4 ('09 & up), A5 ('08 & up), A6 ('12 & up), A7 ('10 & up), Q5 ('09 & up) Allow...

Keeps TDC timing alignment when servicing cam belts Services Audi S4, A6, A8 & all-road Quattro Comparable to OEM #T40046 Applications ...

Services 2006 - 2009 VW / Audi 2.0L Turbo engines Comparable to OEM #T10252 Application Details Make Model Trim Engine Year Audi A3 B...

Services FWD VW & Audi with top shock-retaining nut recessed inside the strut tower Tool's center bore holds the strut shaft to keep from tu...

Adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tension adjustment ...

2-pin wrench adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tensio...

Special bars lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC ...

“Lollipop” wrench locks the pulley on the waterpump and easily loosens stubborn bolts found on: VW Polo, Golf, Passat and Audi 80/A4 Inc...