7912 - Turbo System Tester

• The turbo system leakage tester helps locate air leaks in the components by plugging the output side of the turbo and plugging the intake inlet
• Air is applied through one end of the adapter to show the presence of leaks within the system
• Kit features a pressure gauge, shut off valve and pressure regulator
• Comes with 6 pairs of stepped adapters to fit most size hoses
• This setup can also be used on cooling system hoses

WARNING: Injury could occur if system is over pressurized - We Recommend NOT exceed 15 PSI

Includes adapters, sizes:

• 7912X01 - 16mm / 22mm - Inlet Adapter w/ Coupling
• 7912X02 - 16mm / 22mm - Block Adapter
• 7912X03 - 25mm / 32mm - Inlet Adapter w/ Coupling
• 7912X04 - 25mm / 32mm - Block Adapter
• 7912X05 - 35mm / 45mm - Inlet Adapter w/ Coupling
• 7912X06 - 35mm / 45mm - Block Adapter
• 7912X07 - 50mm / 60mm - Inlet Adapter w/ Coupling
• 7912X08 - 50mm / 60mm - Block Adapter
• 7912X09 - 65mm / 75mm - Inlet Adapter w/ Coupling
• 7912X10 - 65mm / 75mm - Block Adapter
• 7912X11 - 80mm / 90mm - Inlet Adapter w/ Coupling
• 7912X12 - 80mm / 90mm - Block Adapter
• 7912X13 - Pressure Gauge Assembly