Skip to content
4026 - Dodge Wheel Hub Removal Adapter

4026 - Dodge Wheel Hub Removal Adapter

SKU 4026
$31.95 - $31.95
$31.95
$31.95 - $31.95
$31.95

Orders placed before 12:00pm EST Mon-Fri ship same day. Orders placed after 12:00pm EST ship next business day.

  • Helps remove stuck front hubs on 2500 (3/4 ton) and 3500 (1 ton) Dodge P/U's (Late 1990s & Up)
  • Acts as pushing tool by placing against hub bolt then turning power steering against tool
  • Faster and safer than sledge hammer
  • Solid steel cylinder w/ 3/4" hex opening
  • OAL: 4-3/4" (12cm)

1. Loose the four hub bolts using a socket and ratchet

2. Back out bolts slightly (about a quarter of an inch), they will be used to press hub out of the knuckle

3. Place tool over the hub bolt

4. Turn steering knuckle assembly, wedging adapter against axle bracket

5. Turn steering wheel, applying pressure and removing hub

Interchange
  • Helps remove stuck front hubs on 2500 (3/4 ton) and 3500 (1 ton) Dodge P/U's (Late 1990s & Up)
  • Acts as pushing tool by placing against hub bolt then turning power steering against tool
  • Faster and safer than sledge hammer
  • Solid steel cylinder w/ 3/4" hex opening
  • OAL: 4-3/4" (12cm)

1. Loose the four hub bolts using a socket and ratchet

2. Back out bolts slightly (about a quarter of an inch), they will be used to press hub out of the knuckle

3. Place tool over the hub bolt

4. Turn steering knuckle assembly, wedging adapter against axle bracket

5. Turn steering wheel, applying pressure and removing hub