Skip to content
GET A FREE CTA T-SHIRT WHEN YOU SPEND $200! Add T-Shirt to cart to receive automatic discount.
GET A FREE CTA T-SHIRT WHEN YOU SPEND $200! Add T-Shirt to cart to receive automatic discount.
3840 - EZ Chamfer - Large

3840 - EZ Chamfer - Large

SKU 3840
$139.95 - $139.95
$139.95
$139.95 - $139.95
$139.95

Orders placed before 12:00pm EST Mon-Fri ship same day. Orders placed after 12:00pm EST ship next business day.

  • 5 Point design for quick and clean deburring
  • Range: 0.7” – 1.5” (18-38mm)
  • Single M2-HSS Construction - a tungsten-molybdenum high speed steel suitable for a wide variety of applications
  • Efficiently removes burrs and ridges from bolts, pipe, threaded rod, bar and dowels
  • Threads and burrs are sheared off creating the perfect chamfer for starting a nut or threading die
  • It is suitable for use on metals including:
    • MILD STEEL - U.S. Grade 2 - Metric Grade 4.8
    • HARD STEEL - U.S. Grade 5 - Metric Grade 8.8
    • VERY HARD STEEL - U.S. Grade 8 - Metric Grade 10.9
    • STAINLESS STEEL - 300 Series
    • SUPER HARD STEEL - U.S. Grade ASTM-A574 - Metric Grade 12.9

    ATTENTION: For best results, use a slow drill speed with medium pressure on most materials (Harder materials will require a higher feed pressure)

    • On most applications it is only necessary to chamfer the first 1 to 3 threads
      • USE AT LOW SPEED - MAXIMUM 600RPM.
      • IMPACT DRIVERS WILL REDUCE TOOL LIFE
    • E-Z CHAMFER (M2-HSS) recommended RPM according to size:
      • 18-24mm (600RPM)
      • 23-29mm (400RPM)
      • 30-38mm (300RPM)

    Smaller diameter EZ Chamfer tool available: #3838

    Click here to view product flyer

     

    Click here to view product instructions

    Interchange
    • 5 Point design for quick and clean deburring
    • Range: 0.7” – 1.5” (18-38mm)
    • Single M2-HSS Construction - a tungsten-molybdenum high speed steel suitable for a wide variety of applications
    • Efficiently removes burrs and ridges from bolts, pipe, threaded rod, bar and dowels
    • Threads and burrs are sheared off creating the perfect chamfer for starting a nut or threading die
    • It is suitable for use on metals including:
      • MILD STEEL - U.S. Grade 2 - Metric Grade 4.8
      • HARD STEEL - U.S. Grade 5 - Metric Grade 8.8
      • VERY HARD STEEL - U.S. Grade 8 - Metric Grade 10.9
      • STAINLESS STEEL - 300 Series
      • SUPER HARD STEEL - U.S. Grade ASTM-A574 - Metric Grade 12.9

      ATTENTION: For best results, use a slow drill speed with medium pressure on most materials (Harder materials will require a higher feed pressure)

      • On most applications it is only necessary to chamfer the first 1 to 3 threads
        • USE AT LOW SPEED - MAXIMUM 600RPM.
        • IMPACT DRIVERS WILL REDUCE TOOL LIFE
      • E-Z CHAMFER (M2-HSS) recommended RPM according to size:
        • 18-24mm (600RPM)
        • 23-29mm (400RPM)
        • 30-38mm (300RPM)

      Smaller diameter EZ Chamfer tool available: #3838

      Click here to view product flyer

       

      Click here to view product instructions