Timing Tools

Lock Pin - Thick Compare to Ford Factory Tool 303-748 Applications Make Model Engine Years Ford Fiesta 1.25L Duratec 2005-2008 Ford Fiesta...

Compresses belt tensioner spring when replacing the engine drive belt and alternator Services GM 2.4L EcoTec (Hybrid) 2011-2016; Buick Regal, LaCr...

Tool holds the camshaft at T.D.C. to ensure proper timing when performing service on timing system components (cams, gears, chains, etc.) Designed...

For repairing the balancer shaft, holding chain sprocket and for removing and installing the oil pump, chain, and sprocket for repair This kit in...

Used to counter-hold the crankshaft pulley to release and tighten center bolt Compare to Volvo Factory Tool: #999 5433 Application Details ...

Sets & adjusts timing on '98 - '07 VW TDi engines Engine: 1.9L & 2.0L TDi Includes: Lock Pins Cam Lock Bar ...

Bracket is used to hold a GM 1.5L engine Bracket is installed onto both camshafts, and holds the assembled hex on both cams to maintain their rela...

For installing timing belts on VW TDI (ALH only) including 1999-2004 Golf, Jetta & Beetle Includes the following tools: 2766 - 2-Pin Tensione...

Services Ford & Mazda 2.0L and 2.3L twin cam turbo engines Including 1.8L Duratec-HE (MI4), 1.8L Duratec-SCi (MI4), 2.0L Duratec-HE (MI4) Ford...

Set of 3 durable steel pins designed to lock the serpentine and cam belts on many VAG engines Insert into holes on tensioner housing to hold arm s...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

Lock Pin - Thin Compare to Ford Factory Tool 303-507 Applications Make Model Engine Years Ford Escape 2.3L DOHC 4V I4 2005-2012 Ford Fusio...

Used to properly lock and time the 2.0L TDi EA288 diesel engine for 2015+ Volkswagen models. The components in the kit include: Crankshaft Lock –...

19mm bushed socket to prevent slippage and rounding off of the cam bolt at the end of the camshafts Services 1996-1998 Porsche 911, 3.6L ...

For removal & installation of 4/3-way central valve for camshaft adjustment Services 2.0L (4v) generation 1, 2 & 3 TFSI engine with chain ...

Used for adjusting the camshafts when performing service on the timing system Also found in CTA No. 7066 Volvo Camshaft Alignment Kit Compare to V...

Used for aligning the position of the camshaft pulley T100 x 1/2"Dr. Made of Durable, high quality Carbon Steel Compare to Mercedes Benz Factory T...

Required for proper installation of the Micro-V Stretch Belt on the A/C and Alternator Drive Avoid damage to the belt, A/C and Alternator Drive Se...

Services belts on Volvo & BMW Heavy-duty long bar with T60 Torx Bit on one end & T50 Torx Bit on other end, plus 16mm x 12-point opening b...

Includes Two long-handled (22" / 55cm) wrenches, each with special bends, designed specifically for Mini Coopers equipped with the N12, N14, N16 a...

Toyota Timing Belt Tensioner Compressor Allows for easy belt replacement For 95 & Up T100, Tacoma & 4 Runner trucks Internal nut to ex...

Special bars lock camshafts relative to each other during timing belt and tensioner service or when removing crank bolts Use with CTA #2872 TDC ...

The Ford crankshaft damper holding tool, part number 6150, is designed for holding the crankshaft damper in place during servicing of 2012 and new...

Socket is used for turning the camshafts during engine timing service Services: M133, M176, M178, M264, M270 & M274 engines Use with ½” square...

Use to install and remove the camshaft adjusters Use to secure cam position during timing chain replacement Made from durable Cr-V hardened alloy ...

The timing tool set includes the tools required to properly service GM Atlas/Vortec engine family Kit includes: 7459 - GM Lower Timing Gear Retai...

Tool kit is used to install the piston pin circlip on Porsche engines Includes:  5018X05 - Pin Driver & Extension 5018X06 - Alignment tool A...

Comprehensive tool kit services Ford, Lincoln, Land Rover & Mazda 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L & 3.0L engines Used on EcoBoost, Dura...

Tool mounts to the front of the block, its tabs engage both cam phasers to be held in place so the phaser bolts may be serviced The ECOTEC engines...

Services the left & right head for "High Feature" 2006+ 2.8L, 3.0L & 3.6L V6 GM engines Prevents rotation during timing chain service Ind...

Kit combines CTA: 1068 - Crank Bolt Socket - 27mm Use for easily breaking loose crank bolts Counter-weighted design for high torque application...

Vibration Damper Counter Holder for Porsche 970 & 92A Used to counter hold the crankshaft pulley during removal and installation Used for repl...

Counter-weighted design for high torque applications, including: Mercedes Benz (Can be used with CTA 3998 for Benz Applications) Nissan/Infinit...

Services Camshaft Adjuster (#10 Polydrive) bolts, where clearance is critical Bolts are found at the back of the engine-bay near the firewall 9mm ...