Specialty Sockets

Extra-long design (10" / 25.4cm) socket for deep-reach access to spark plugs Internal magnet holds spark plug firmly Use with 3/8" square drive to...

Counter-weighted design for high-torque applications Services Honda, Kia and others with 17mm applications Use with 1/2" square drive tools

Designed to make removal and installation of O2, NOx and EGT sensors fast and damage-free Features a side slot that slips over the sensor wiring, ...

T50 Torx® Socket Constructed of chrome vanadium steel and shock-resisting tool steel for shock and impact durability Included in CTA 9368 8 Pc. Pi...

Use for servicing all kinds of pickup truck bed fasteners Includes the following Torx, Torx Plus & External Torx Plus sockets and bits Sizes i...

E20 Flat-Cut E-"Star" Socket from 1469 Flat-Cut E-"Star" Socket Set The flat-face precision fit prevents rounding off flush-mount "Star" bolts Sli...

17mm by 12-point flare nut and deep crowfoot socket allows technician to remove hard-to-reach injector lines on Ford 6.7L Power Stroke application...

Counter-weighted design for high torque applications Breaks loose crank bolts that regular sockets can't Services GM (LS engines) & Land Rover...

5 point EPR Torx® design Size: 20EPR Drive size: 3/8" Note: 5 sided EPR Torx® Plus sockets are NOT to be confused with standard six-sided EP Torx...

17mm Offset Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

Slotted Double-D Socket 6 x 8mm

14mm Offset Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

Go-Thru Deep Socket - 17mm

Go-Thru Deep Socket - 19mm

Services retaining nuts found on BMW E24, E28, E32, E34 & E85 Also fits Audi & VW Type 2 rear axle shaft nuts 46mm x 6 Point (Outside Diam...

2-piece design for high-torque applications 5-point head and tamper-hole for security fasteners Size: TS27 Drive: 1/4"

Services elliptical-shaped fasteners now found on many vehicle applications Standard "Star" or Ribe designs will not fit these fasteners Black fin...

Services elliptical-shaped fasteners now found on many vehicle applications Standard "Star" or Ribe designs will not fit these fasteners Black fin...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E12 - OAL 60mm 3/8" ...

Sockets are designed to install and remove Exhaust Gas Temperature sensors on cars & trucks without damaging connection wire, housing, sensor ...

10 Point socket for caliper retaining screws on Porsche Macan, Cayenne, Audi Q7 & S8 models Visit ctatools.com for application details 3/8" sq...

Designed to Service BMW, Ford, Mercedes Benz, MINI, Nissan, Infiniti, Subaru, Toyota, Scion, Volkswagen, Audi, Porsche & more Features a swive...

Services 46mm x 12 point retaining nuts found on many BMW models Similar to BMW Tool #31-2-080 Special Thin Wall Socket OAL: 68mm ...

Applications: Ford F250, F350 & F450 Super Duty trucks w/ 10-1/2" rear axle (2003+) 1/2" square drive Compare to Ford Factory Tool #205-282 ...

Features 14mm & 16mm 12 point swivel spark plug sockets to access hard to reach spark plugs 15-20° max swivel range 3/8" Square Drive Includes...

5/8" x 12 Point Magnetic Thin Wall - 20.2mm / 0.795" OD 3/8" Square Drive OAL: 6" Applications Make Model Year Jeep Grand Cherokee 199...

3 Point Nissan Transmission Pump Socket 1/2" Drive Size: 8TS OAL: 1.5"

120mm long socket for extra-deep reach 3/8" Drive 6 Point 14mm 19.75mm OD (excluding Drive Diameter) Applications: BMW Spark Plugs

120mm long socket for extra-deep reach 3/8" Drive 6 Point 11mm 15.35mm OD (excluding Drive Diameter) Applications: BMW E90/92 Clutch Bleeder Val...

Counter-weighted design for high torque applications, including: Mercedes Benz (Can be used with CTA 3998 for Benz Applications) Nissan/Infinit...

Flex shaft with flip socket heads to service hose clamps, body panels, trim panels, etc. in hard-to-reach areas Size range of Flip Socket head: ...

Services Camshaft Adjuster (#10 Polydrive) bolts, where clearance is critical Bolts are found at the back of the engine-bay near the firewall 9mm ...

Rotates & holds intake camshaft during timing chain service on TFSI engines 3/8" square drive Compare to Factory Tool #T10567 & #40266 Ap...

4 popular metric sizes to service most Automotive Lug Nuts, including hard-to-find 22mm All thin-wall for tight access, plus plastic sleeve to pro...