Specialty Sockets & Bits

For removal & installation of 4/3 way central valve for camshaft adjustment on 1.8 & 2.0 generation 1, 2 & 3 TFSI engines 3 sizes with...

Rotates & holds intake camshaft during timing chain service on TFSI engines 3/8" square drive Compare to Factory Tool #T10567 & #40266 Ap...

Services Camshaft Adjuster (#10 Polydrive) bolts, where clearance is critical Bolts are found at the back of the engine-bay near the firewall 9mm ...

Counter-weighted design for high torque applications, including: Mercedes Benz (Can be used with CTA 3998 for Benz Applications) Nissan/Infinit...

Designed to fit triangular profile, tamperproof fixings on Volkswagen/Audi Tdi engines, Bosch injector, and other light fittings Replace p...

12 Pt. x 14mm Socket - Tamper Use for removal of caliper bolts, struts & axle flanges from transmission Services: VW/Audi Applications: 2006-2...

Used for turning the crankshaft pulley Working End: 22mm square drive with 12mm rotating pivot pin Drive: Dual 1/2" Square drive & 24mm ...

120mm long socket for exta-deep reach 3/8" Drive 6 Point 9mm 13.35mm OD (excluding Drive Diameter) Applications: Common Euro Size

120mm long socket for extra-deep reach 3/8" Drive 6 Point 13mm 17.5mm OD (excluding Drive Diameter) Applications: Common Euro Size

120mm long socket for extra-deep reach 3/8" Drive 6 Point 15mm 21.5mm OD (excluding Drive Diameter) Applications: Common Euro Size

120mm long socket for extra-deep reach 3/8" Drive 6 Point 16mm 21.65mm OD (excluding Drive Diameter)

120mm long socket for extra-deep reach 3/8" Drive 6 Point 17mm 23.75mm OD (excluding Drive Diameter) Applications: Diesel glow plugs BMW E90/92 ...

120mm long socket for extra-deep reach 3/8" Drive 6 Point 18mm 25.75mm OD (excluding Drive Diameter)

Unique design provides interchangeable wrench sizes Flexes up to 45° to grip the direct fuel line from any angle Provides ability to tighten and ...

14mm x 12-point XZN socket with tamper-proof head services various '03 & up VW, Audi, and Porsche Axle Bolts, Differential Bolts, and Transmi...

Size: 18mm Service fasteners on VW, Audi, Porsche, and some Detroit Diesel engines Services Rear axle bolts on Volkswagen's Jetta and Golf mode...

Sizes: (3 piece set) 14mm, 16mm, and 18mm Service fasteners on VW, Audi, Porsche, and some Detroit Diesel engines 18mm size services rear axle bol...

Service 5/8" recessed automotive spark plugs, plus marine, small engine, and specialty motors Includes recessed magnet to hold plug 10" long for d...

Remove cartridge-type oil & fuel filer housing caps with 27mm hex nut Chrome vanadium steel 3/8" square drive Application Details M...

Remove housings with cartridge-type oil & fuel filters Chrome vanadium steel 3/8" square drive 32mm Application Details Make Model Ye...

Remove housings with cartridge-type oil & fuel filters. Chrome vanadium steel 3/8" square drive 36mm Application Details Make Model ...

Special oval shaped bit end services Suspension Strut Housing Nuts found on mostly newer VW & Audi models After removing pinchb...

12 point semi deep mini flip sockets with ¼” drive include two hex sizes Designed to reduce work time Size: 8mm/10mm OAL: 1.5" (38...

12 point semi deep mini flip sockets with ¼” drive include two hex sizes Designed to reduce work time OAL: 1.5" (38cm) Size: 9mm/...

12 point semi deep mini flip sockets with ¼” drive include two hex sizes Designed to reduce work time OAL: 1.5" (38cm) Size: 12m...

12 point semi deep mini flip sockets with ¼” drive include two hex sizes Designed to reduce work time OAL: 1.5" (38cm) Size: 13mm...

For removal and installation of axle bolts, performed during strut replacement, axle replacement, and other various repairs Size: 24mm x 12 Pt Ser...

10 Point socket for caliper retaining screws on Porsche Cayenne & Audi Q7 models 3/8" square drive OD: 11.5mm Length 50mm Application Details...

10 Point socket for caliper retaining screws on Porsche Macan, Cayenne, Audi Q7 & S8 models Visit ctatools.com for application details 3/8" sq...

10 Point socket for caliper retaining screws 1/2" square drive OD: 20mm Length 50mm Applications Make Model ...

Services the caliper retaining screws on VW/Audi/Porsche (VAG) brakes Includes sizes: 5025 - 7pt. x 14mm - 1/2" Sq. Dr. 5027 - 7pt. x 22mm - 1/2"...

Used to remove and install the intake manifold of a 2.0L 4V Turbocharged common rail TDI engine 10mm Triple Square (XZN) Ball End Applications: 20...

Designed to service 17mm lug nuts or Lug Bolts with missing and distorted chrome caps, found on many Dodge, Chrysler, Jeep, Ford, Lincoln, GM,...

Comprehensive "Flip" socket set offering two hex sizes in one socket. Half metric sizes for the removal of inflated, warped and mangled chrome-ca...

Widest range Brake Caliper Socket & Bit set on the market Features the newest and most commonly used caliper sockets for most makes and models...

Used for replacement of actuator with position sender for charge pressure actuator Use on 2.0L Diesel Common Rail engine Compare to VW/Audi Factor...