Specialty Sockets & Bits

Releases the Lower Ball Joint Services Audi A4 ('09 & up), A5 ('08 & up), A6 ('12 & up), A7 ('10 & up), Q5 ('09 & up) Allow...

For removal & installation of 4/3 way central valve for camshaft adjustment on 1.8 & 2.0 generation 1, 2 & 3 TFSI engines 3 sizes with...

Rotates & holds intake camshaft during timing chain service on TFSI engines 3/8" square drive Compare to Factory Tool #T10567 & #40266 Ap...

Services Camshaft Adjuster (#10 Polydrive) bolts, where clearance is critical Bolts are found at the back of the engine-bay near the firewall 9mm ...

Designed to fit triangular profile, tamperproof fixings on Volkswagen/Audi Tdi engines, Bosch injector, and other light fittings Replace p...

12 Pt. x 14mm Socket - Tamper Use for removal of caliper bolts, struts & axle flanges from transmission Services: VW/Audi Applications: 2006-2...

Used for turning the crankshaft pulley Working End: 22mm square drive with 12mm rotating pivot pin Drive: Dual 1/2" Square drive & 24mm ...

120mm long socket for exta-deep reach 3/8" Drive 6 Point 9mm Applications: Common Euro Size

120mm long socket for extra-deep reach 3/8" Drive 6 Point 13mm Applications: Common Euro Size

120mm long socket for extra-deep reach 3/8" Drive 6 Point 15mm Applications: Common Euro Size

120mm long socket for extra-deep reach 3/8" Drive 6 Point 16mm

120mm long socket for extra-deep reach 3/8" Drive 6 Point 17mm Applications: Diesel glow plugs BMW E90/92 ...

120mm long socket for extra-deep reach 3/8" Drive 6 Point 18mm

Unique design provides interchangeable wrench sizes Flexes up to 45° to grip the direct fuel line from any angle Provides ability to tighten and ...

14mm x 12-point XZN socket with tamper-proof head services various '03 & up VW, Audi, and Porsche Axle Bolts, Differential Bolts, and Transmi...

27mm socket with window Services injectors found on BMW, Ford, Fiat, Nissan, VW, Mercedes Benz, etc. Black finish with 1/2" square drive

Size: 18mm Service fasteners on VW, Audi, Porsche, and some Detroit Diesel engines Services Rear axle bolts on Volkswagen's Jetta and Golf mode...

Sizes: (3 piece set) 14mm, 16mm, and 18mm Service fasteners on VW, Audi, Porsche, and some Detroit Diesel engines 18mm size services rear axle bol...

Fits 5/8" Spark plug Rubber insert is removable Depth of hole is 2.25" (Solid until 3/8 drive end) Length: 5" Square drive: 3/...

Service 5/8" recessed automotive spark plugs, plus marine, small engine, and specialty motors Includes recessed magnet to hold plug 10" long for d...

Remove housings with cartridge-type oil & fuel filters Chrome vanadium steel 3/8" square drive 32mm Application Details Make Model Ye...

Remove housings with cartridge-type oil & fuel filters. Chrome vanadium steel 3/8" square drive 36mm Application Details Make Model ...

Used for removing & installing the oil drain plug on 4.2L FSI, 4v V8 engine Also used for removing & installing the intake manifold on 2.0...

Special oval shaped bit end services Suspension Strut Housing Nuts found on mostly newer VW & Audi models After removing pinchb...

12 point semi deep mini flip sockets with ¼” drive include two hex sizes Designed to reduce work time Size: 8mm/10mm OAL: 1.5" (38...

12 point semi deep mini flip sockets with ¼” drive include two hex sizes Designed to reduce work time OAL: 1.5" (38cm) Size: 9mm/...

12 point semi deep mini flip sockets with ¼” drive include two hex sizes Designed to reduce work time OAL: 1.5" (38cm) Size: 12m...

12 point semi deep mini flip sockets with ¼” drive include two hex sizes Designed to reduce work time OAL: 1.5" (38cm) Size: 13mm...

For removal and installation of axle bolts, performed during strut replacement, axle replacement, and other various repairs Size: 24mm x 12 Pt Ser...

7 Point socket for caliper retaining screws Applications: Audi Q7, S5 and various Mercedes Benz models 1/2" square drive OAL: 50mm Applications ...

7 Point socket for caliper retaining screws on Audi S4 & S5 models 1/2" square drive Length 48mm Applications Make Model Year Audi ...

10 Point socket for caliper retaining screws on Porsche Cayenne & Audi Q7 models 3/8" square drive OD: 11.5mm Length 50mm Application Details...

10 Point socket for caliper retaining screws on Porsche Macan, Cayenne, Audi Q7 & S8 models Visit ctatools.com for application details 3/8" sq...

10 Point socket for caliper retaining screws 1/2" square drive OD: 20mm Length 50mm Applications Make Model ...

Services the caliper retaining screws on VW/Audi/Porsche (VAG) brakes Includes sizes: 5025 - 7pt. x 14mm - 1/2" Sq. Dr. 5027 - 7pt. x 22mm - 1/2"...

Used to remove and install the intake manifold of a 2.0L 4V Turbocharged common rail TDI engine 10mm Triple Square (XZN) Ball End Applications:...