Seal Installers

Installs crankshaft seal Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018...

Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011-2019 For Rear Remover - See CTA 7315 Compare to Ford Factory Tool ...

Kit provides tools required to remove and install all crankshaft seals on 6.7L Power Stroke engines Services Ford Super Duty F-250, F-350, F-450, ...

Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 & 2019 Includes: 1 R...

Services Ford Super Duty F-250, F-350, F-450, F-550, F-650 & F750 from 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 & 2019 Compare to Fo...

Use for 3.9L, 5.9L & 6.7L Cummins engines when wear sleeve is installed or replaced Services Paccar PX-6, 1989-2016 Cummins 4BT 3.9L, B Series...

Press fit rear seal to engine block & crankshaft for proper fitment of inner & outer seal body Services GM/ISUZU 6.6L Duramax 2001-2016 GM...

Properly installs the injector seal Services Ford 1.6L, 2.0L, 2.3L, 3.5L, and 3.7 GTDI Engines Compare to Ford Factory Tools 310-207 & 303-15...

Installs the front seal and wear ring on the crankshaft for 6.4L Ford Powerstroke Designed to eliminate lip flare on the wear sleeve and installs ...

Installer is designed to eliminate lip-flare on the wear sleeve, which can cause oil leaks during install Properly installs the seal, which helps ...

Use for install of wheel hub oil seal on single or dual wheel axle assemblies Seal installer adapter is driven with the 7" detachable handle Appli...

Use to install the crankshaft rear oil seal and wear sleeve. Services 2003-2010 Ford 4.5L, 6.0L & 6.4L Power Stroke engines Applications: Ford...

Use to remove and install seals without wear sleeves such as: #3934486, #3926126 & #3925529 Services Cummins 3.5L, 3.9L, 5.9L & 6.7L (198...

Press fit front seal to engine block & crankshaft for proper fitment of inner & outer seal body (works w/ 3878) Services GM/ISUZU 6.6L Dur...

Tool is used for installing the front Crankshaft Wear Sleeve Note: CTA #5041 is required for installing factory seal #3937111, #3904353 and the se...

Installs Factory front seal #3937111, #3904353 and the seal found in kit #3802820 Note: CTA #5046 is required if the seal has a wear sleeve Appli...

Used for replacing the Teflon fuel injector seals Services: Subaru 2.0L & 2.4L turbo boxer engines (2014-2019) GM 2.0L & 3.6L engines H...

Installs front crankshaft oil seal and wear sleeve to repair grooved crankshaft surfaces Ensures proper depth and alignment during seal and sleeve...

Replaces Teflon fuel injector seals on Hitachi, Bosch, Continental, and Delphi injectors Services: Ford EcoBoost, GM (2010+) & Subaru Turbo di...

Installs both the front seal and the damper Services F-250, F-350, F-450 & F-550 Super Duty 7.3L (Powerstroke & T444E) engine ...

Replaces the rear crankshaft seal on BMW B37, B47, B48, B57, B58, N47 & N57 engines Components: 3882X01 – Guide Tool 3882X02 – Press Tool 38...

Used when assembling crankshaft PTFE seal & flywheel end Provides proper installation of rear main seal For 2008 - 2017 vehicles with TSI engi...

Removes injectors using M8 x 1.25 thread and included mini slide hammer Installs Teflon seal with included tapered cone Made of desulphurized carb...

• Aligns the camshaft to Top Dead Center (TDC) on M176, M177, and M178 engines• Alternative to factory timing plates for precise timing adjustments...

Crowfoot wrench is used for removing and installing fuel injectors on BMW N55, N20, N26, N63, B38, B48, and B58 engines 24mm crowfoot wrench fits ...

This comprehensive kit contains all the essential tools for servicing the crankshaft front and rear seals on Ford Powerstroke diesel engines Inclu...

This rear crankshaft seal remover is designed to remove the rear seal on 2001 and newer 6.6L Duramax diesel engines. Its three jaws grab the inner...

This crankshaft seal and wear sleeve remover is designed for servicing the front crankshaft seal on 2001 and newer 6.6L Duramax diesel engines. Th...

Master kit for servicing the front and rear crankshaft seals on 2001-2016 6.6L Duramax diesel engines Includes: 3878 Rear Crankshaft Seal Install...

Removes front crankshaft seal on straight-6 twin turbo DOHC engines Applications: BMW N51, N52, N52N / N52K, N54, & N55 Tool is also included ...

Used for aligning the front crankshaft seal on BMW N55 engines Use in conjunction with CTA 7643 components Compare to BMW factory tool #119235 Ap...

Removes and installs fuel injector sleeve cup Saves time by eliminating need to remove heads Services F-250, F-350, F-450 & F-550 Super Duty 7...