Products Not On Sale

Direct air line chuck for hard-to-reach valves on trucks, buses, and tractors 1/4" female NPT OAL: 6" / 15cm

Adapter flips to fit both 9/16" - 18 and 14mm threads to service tilt-wheel and telescoping columns Narrow yoke is 5" (127mm) deep

2-piece socket design Use with 3/8" drive tools Size: 9mm hex Ford, Mazda

Helps install pads by compressing inner pad and resetting caliper position Disc Brake Pad Spreader Tool Caliper Piston Compressor Tool

Removes cut, torn, and folded metal to produce long wearing surface For engine and brake cylinders, hydraulics, valve guides, lifter bores, dies...

Removes cut, torn, and folded metal to produce long wearing surface For engine and brake cylinders, hydraulics, valve guides, lifter bores, dies...

Removes cut, torn, and folded metal to produce long wearing surface For engine and brake cylinders, hydraulics, valve guides, lifter bores, dies...

Removes cut, torn, and folded metal to produce long wearing surface For engine and brake cylinders, hydraulics, valve guides, lifter bores...

Removes cut, torn, and folded metal to produce long wearing surface For engine and brake cylinders, hydraulics, valve guides, lifter bores, dies...

Removes cut, torn, and folded metal to produce long wearing surface For engine and brake cylinders, hydraulics, valve guides, lifter bores, dies...

Medium Grit (220 - 240) Qty: 3 Length: 22mm Includes cotter pins Will also fit other brands! MADE IN USA

Extracts the broken porcelain from spark plug sleeves that broke during a regular service Services: Ford ’04 – ’08 (4.6, 5.4 & 6.8 engines) ...

CLICK HERE TO VIEW PRO THREAD FLYER Pro-Thread Kits offer a cost effective method of repairing and strengthening threads in various materials su...

To be used with CTA kit # 98141 Includes two (2) each of the following inserts: 98142 - 1/4" 98143 - 3/8" 98144 - 5/8"

To be used with CTA kit # 98141 1/2" Insert (Short) - 5 each

To be used with CTA kit #2340 Includes a set of two - (2) - 1/2" Long Inserts

Harden steel tool removes carbon and corrosion and straightens damaged threads Works on both 10mm & 14mm sizes 10mm x 1.0 14mm x 1.25 Tape...

  Locks and holds camshafts when adjusting the left and right camshafts Services: Audi A4, A6 & A8 (2001 – 2008) with AVK engine Includes hold...

Holds the chain and tensioner in position during assembly and disassembly on many VW & Audi vehicles. Compare to VW/Audi Factory Tool #3366 ...

Keeps the crankshaft pulley from turning when changing the timing belt and/or crankshaft seal Designed to withstand the torque specs for the crank...

Two part splined wrench is required for removal and replacement of free-wheel drive pulleys found on Bosch Alternators 10mm x 12 point end locks a...

Complete set of tools to remove and install press-on-type belt-drive Bosch and Denso Alternator Pulleys Components include: Torx ®, Triple-Square...

17mm hex with 3/8” square drive. Fits all Gems engine Land Rovers, including: Range Rover Classic - ’87 – ’95 Range Rover 4.0/4.6 - ’95 – ’98 Dis...

Use to remove and install Fan Clutch Assemblies when replacing Water Pumps or doing other Engine Services Use two wrenches together: one for h...

Releases the fitting that connects the heater hose to the engine block and thermostat housing

Disconnects the hydraulic clutch line from the clutch slave cylinder

Removes the fuel line from center port of fuel sending unit Sizes: 3/8" 5/16"

Scissor-Type Disconnect Tool Services connectors on Fords and Chryslers 3/4”, 5/8”, 1/2” & 3/8”

Anodized metal design for strength and durability Use tapered side of tool against the locking clip. Applications: 2006 – 2011 BMW 3 series 2006 ...

Clamp hoses and vacuum lines with special swivel jaws Maintain a parallel clamp Features built-in ratchet mechanism that locks handles...

Use with CTA #7400 Services Volvo vehicles with 5/16 x 24 threaded end Services some 2007 - 2012 Volvos Will work on most "Non-CTA" ATF Fillin...

Use with CTA #7400 Services VW & Audi vehicles with CVT 22 x 1.5 threaded end Will work on most "Non-CTA" ATF Filling System Tanks...

Use with CTA #7400 ATF Filling Adapter Services Ford vehicles with 1/8" x 27N threaded end Will work on most "Non-CTA" ATF Filling System Tanks A...

Removes springs and valve guide seals without removing cylinder head. Used by removing rocker and fastening tool to stud with nut, then use an a...

For pressurizing Cooling Systems All metal construction For vehicles with small, deep necks Use with CTA #7050 Pressure Tester Compatible with ot...

Extract or transfer Motor Oil, ATF, Gear Lube, Gasoline, Coolant or Water from inaccessible or confined areas For cars, boats, trucks, farm equipm...