Products Not On Sale

Remove and install screw-in type ball joints 3/4" drive Size: 2-9/64" Applications: Light trucks and vans

Test Chrysler, Ford, GM (non-TBI), Japanese makes, Bosch AFC, MPC, Digijet/Digifant (non-CIS), plus others using Bendix-type fuel injection or a S...

Services most USA (except GM TBI) and Japanese systems Contains both large and small Schrader type test fittings, inline and end of line hose fi...

Long, thin blade for precision filing of points and other small objects OAL: 5-1/4" (13cm) California Proposition 65 WARNING: This product co...

Remove and install hard to reach bulbs and fuses, including small instrument cluster bulbs, xenon, halogen, and filament bulbs Better than screwdr...

For vehicles with steel spark plug boots Tool engages the ears of the boot shield to remove and install Saves wires from damage and saves time ...

Tests for shorts, grounds, open circuits, broken wires and bad connections in 6 & 12 volt systems Features 42" / 107cm long wire, impact resis...

Quickly and safely troubleshoots no-starts See and hear if spark is present, test intensity or test spark timing with conventional ignition INSTR...

2 Pc. Set: 2450x03 - size: .001-.003" (green) 2450x04 - size: .002-.006" (red) Measures clearances of engine rod and main bearings without expe...

To be used with CTA kit #2340 Includes a set of two - (2) - 3/8" Long Inserts

Removes valve spring keepers and springs without removing the cylinder head Adjusts to fit springs on most cars Sliding "T" handle for close clear...

Designed to work in areas of difficult access using direct action compressor lever for better visibility Includes 2 valve spring adapter, fittin...

Primes the lubricating system of new and rebuilt engines, sending oil to the internal moving parts before the first start Use with 3/8" o...

Primes the lubricating system of new and rebuilt engines, sending oil to the internal moving parts before the first start Use with 3/8" o...

Sizes: (3 piece set) 14mm, 16mm, and 18mm Service fasteners on VW, Audi, Porsche, and some Detroit Diesel engines 18mm size services rear axle bol...

Size: 18mm Service fasteners on VW, Audi, Porsche, and some Detroit Diesel engines Services Rear axle bolts on Volkswagen's Jetta and Golf models ...

SUPERSEDED BY CTA #4021 - Piston Ring Compressor 3" Application: Passenger Cars Depth: 31/2" (89mm) Range: 21/8 - 5" (54 - 127mm) Features ratchet...

Allows for quick and easy seating in all spark plug holes 2-1/2" (64mm) diamteter gauge with dual calibration (0-300 PSI / 0-21kg/cm²) ATTENTION -...

Direct air line chuck for standard applications All metal construction 1/4" female NPT 3/4" hex

Direct air line chuck for hard-to-reach valves on trucks, buses, and tractors 1/4" female NPT OAL: 6" / 15cm

Adapter flips to fit both 9/16" - 18 and 14mm threads to service tilt-wheel and telescoping columns Narrow yoke is 5" (127mm) deep

2-piece socket design Use with 3/8" drive tools Size: 9mm hex Ford, Mazda

Helps install pads by compressing inner pad and resetting caliper position Disc Brake Pad Spreader Tool Caliper Piston Compressor Tool

Extracts the broken porcelain from spark plug sleeves that broke during a regular service Services: Ford ’04 – ’08 (4.6, 5.4 & 6.8 engines) ...

CLICK HERE TO VIEW PRO THREAD FLYER Pro-Thread Kits offer a cost effective method of repairing and strengthening threads in various materials such...

To be used with CTA kit # 98141 Includes two (2) each of the following inserts: 98142 - 1/4" 98143 - 3/8" 98144 - 5/8"

To be used with CTA kit # 98141 1/2" Insert (Short) - 5 each

To be used with CTA kit #2340 Includes a set of two - (2) - 1/2" Long Inserts

Keeps the crankshaft pulley from turning when changing the timing belt and/or crankshaft seal Designed to withstand the torque specs for the crank...

Two part splined wrench is required for removal and replacement of free-wheel drive pulleys found on Bosch Alternators 10mm x 12 point end locks a...

Complete set of tools to remove and install press-on-type belt-drive Bosch and Denso Alternator Pulleys Components include: Torx ®, Triple-Square...

Use to remove and install Fan Clutch Assemblies when replacing Water Pumps or doing other Engine Services Use two wrenches together: one for h...

Releases the fitting that connects the heater hose to the engine block and thermostat housing

Disconnects the hydraulic clutch line from the clutch slave cylinder

Removes the fuel line from center port of fuel sending unit Sizes: 3/8" 5/16"

Scissor-Type Disconnect Tool Services connectors on Fords and Chryslers 3/4”, 5/8”, 1/2” & 3/8”