Products Not On Sale

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E7 - OAL 42mm 1/4" D...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E6 - OAL 42mm 1/4" D...

Great for many European makes, e.g. BMW Brakes, Transmissions, etc. U-joint design allows access in difficult areas Size: E4 - OAL 42mm 1/4" D...

Bends 3/16, 1/4, 5/16, and 3/8" (4.8, 6.4, 7.9, and 9.5mm) O.D. tubing without kinking or collapsing OAL: 8" / 20cm

Use for accurate tightening of head and manifold bolts whenever a torque angle is required by the manufacturer's specification Also called "torq...

Reversible ratchet type with chrome-plated tube, knurled handle and knurled locking nut holding toque setting Packed in blow mold case ...

Push-button mechanism converts pliers from internal to external Includes interchangeable tips: Straight (.036" / .9mm, .047" / 1.20mm, .070" / 1.8...

4" / 102mm long for deep-reach applications 2-piece construction for high torque applications 1/2" drive Size: 14mm MADE IN USA

Size: 12mm OAL: 2-1/4" 1/2" drive For applications with limited clearance Applications Make Model Year Audi 100 1989-1994 Audi 100 Qu...

Stubby 12-Point Triple Square "XZN" Used for tight access applications Application Guide: #8511 - Various applications on European vehicles. #8...

For use on 420, 428, 520, and 530 chains First bolt locks chain in place while second bolt turns to drive pin completely through the link Foldi...

For removal of female style plugs with rounded off inserts Bolt, Stud or Screw Size: 1/4" Pipe Size: 5/16" Drill Size: 1/8"

Restores damaged threads on bolts and shafts Files are cross-cut and depth proportional to the thread pitch, so will not skip or jump out of fine ...

Remove bearings, gears, bushings, seals, grease retainers, etc. Includes 4 jaw assemblies for internal/external and 2/3 jaw pulling 3 jaw range: 1...

Spread: 14" (356mm) Reach: 11" (279mm) Screw Length: 13" (330mm) Capacity: 13 tons (11.8MT) Instructions Hook the jaws to the desired gear, compo...

Spread: 11" (279mm) 28cm Reach: 9" (229mm) 23cm Screw Length: 9" (229mm) 23cm Capacity: 7 tons (6.4MT) 6364 Kg Instructions Hook the jaws to the ...

Spread: 7" (178mm) Reach: 3-1/2" (89mm) Screw Length: 7" (178mm) Capacity: 5 tons (4.5MT) Thread size: 9/16" (14mm) 20 Threads per inch Instructi...

Spread: 8" (203mm) Reach: 5-1/2" (140mm) Screw Length: 7" (178mm) Capacity: 5 tons (4.5MT) Thread size: 9/16" (14mm) 20 Threads per inch Instruct...

Spread: 4" (102mm) Reach: 3-1/2" (89mm) Screw Length: 5" (127mm) Capacity: 2 tons (1.8MT) Thread size: 9/16" (14mm) 20 Threads per inch Instructi...

Jaw Spread: 15" (381mm) 38cm Jaw Reach: 15" (381mm) 38cm Center Screw Length: 13" (330mm) 33cm Center Screw Diameter: 11/16" Center Screw TPI: 16 ...

Spread: 12" (305mm) 30cm Reach: 11" (279mm) 28cm Screw Length: 13" (330mm) 33cm Capacity: 13 tons (11.8MT) 11820 Kg Instructions Hook the jaws to...

Spread: 7" (178mm) Reach: 5-1/2" (140mm) Screw Length: 7" (178mm) Capacity: 5 tons (4.5MT) Instructions Hook the jaws to the desired gear, compon...

Spread: 4" (101mm) Reach: 3-1/2" (89mm) Screw Length: 5" (127mm) Capacity: 2 tons (1.8MT) Instructions Hook the jaws to the desired gear, compone...

Red Adapter - Mitsubishi, Ford, Nissan, Mazda

Application: Daihatsu Included in 10pc. Master Cylinder Adapter Kit - CTA Part # 7021 I.D. = 64mm x P3.0 O.D. = 70.5mm Nitto fitting size: 1/2" /...

Application: European & Domestic Length: 128mm Width: 100mm Included in 10pc. Master Cylinder Adapter Kit - CTA Part # 7021 Replacement Compon...

Used for upholstery work on most vehicles Two types will service all "hog ring" fasteners Spring loaded with cushion grips Offset 45o

Removes plastic push pins found under hood and in trunk without damage to pins or anchors Features sharpened/hardened jaws and spring-loaded handl...

Use with breaker bar to easily align doors Thick steel construction for durability Compact size for easy storage Instructions Flip the black rev...

Remove all types of automotive plastic fasteners, molding and parts Lightweight but strong, the all-plastic body will not mar or damage interior...

This rack is part of CTA #4380 Spare Tire Tool Kit Includes ONLY the Tool Rack pictured, does not include Spare Tire Tools

This tool is part of CTA #4380 Spare Tire Tool Kit Use for removal & installation of spare tires mounted under vehicle Working end - Slotte...

Removes wheel hubs mounted on tapered axles and press-fit rear drum brakes. Adjustable legs can be extended to an 8" / 20cm diameter bolt circle...

Pulls CV joints with hidden retaining rings without damaging the roller bearing inside the joint Use with CTA #4310 Axle Puller 5/8" - 18 thr...

Installs free-end clamps CTA #4240 - CV Joint Boot Clamp Set - or pre-formed clamps on CV Joint Boots Operate with 1/2" hex drive or T-handle

Applications: Dodge Trucks w/ Dana 60 Manual Hubs (1990-1993) 1/2" drive tools Size: 2-9/16" Rounded 6-Point