Products Not On Sale

Test vehicles with Multi-port fuel injection Features 3-1/2" (90mm) gauge with dual calibration (5-145 PSI / 25-1,000 kPa) Hose with quick disconn...

Upgrades CTA #3300 with the following adapters: Hyundai, Kia, Mitsubishi Style - 11mm Fuel Rail Adapter, 15mm Fuel Rail Adapter, 16mm Fuel Rail A...

High impedance tester protects computer circuitry, drawing less than 7 milliamps Dual color LED indicates red for power (high) and green for groun...

For 6 & 12 volt systems Features heavy duty ground clip and insulator 5' / 1.5m rubber wire with spring supported strain relief and extra thic...

Tests high voltage in spark plugs, plug wires and distributor caps Test 6 & 12 volt systems for shorts, grounds and open circuits with power o...

Tests for the presence of spark without risk of shock and without damaging wires Identifies badly fouled spark plugs Includes 48" (122cm) lead, ho...

Saves the memory of the on-board vehicle computer when the battery is disconnected Plugs into cigarette lighter Use with 9V alkaline b...

2-pin wrench adjusts the tensioner on idler pulleys with pin holes Tool rotates pulley around the off-center retaining bolt for easy belt tension ...

Remove housings with cartridge-type oil & fuel filters. Chrome vanadium steel 3/8" square drive 36mm Application Details Make Model ...

The offset jaws will grip the valve spring in parallel compression with no need to remove the head. The jaws are extra long for use on high perf...

Use with the cylinder head still on the engine and in the car, or with the cylinder head removed Tool bolts to the head while the lever pivots fro...

Removes and replaces valve keepers on all gas and diesel overhead valve engines, including motorcycle, marine and aircraft engines Tool is spring-...

Removes lifters that are not baked in or stuck without removing manifold Heat-treated teeth hook under groove OAL: 13" (33.5cm) Di...

Hardened steel tips allow for easy seal removal OAL: 10" (25cm)

For fast overhead valve repairs without removing cylinder head Fit 14 & 18mm spark plug holes Accepts 1/4" air hose coupling

Primes the lubricating system of new and rebuilt engines, sending oil to the internal moving parts before the first start Use with 3/8" o...

Removes shellacked gaskets, paint, grease and carbon 1" wide forged alloy steel blade with chisel edge Can be re-sharpened OAL: 9-3/4" (25cm)

Installs piston rings from 27/8 to 43/8" (73-111mm) Includes ratcheting pliers and 6 sizes of 11/2" wide compressor bands Works either parallel or...

For hard-to-reach valves, straight-on chuck with 30 degree reverse angle 1/4" female NPT 5/8" hex "14"" Straight On Chuck" Maximum Pressure 1...

Extra-long gauge reaches inside and outside wheels Built for use in heavy-duty environments Two-sided nylon indicator bar is dual calibrated from ...

For relining rear disc brakes by rotating pistons back into brake calipers when replacing pads 5 drive pin configurations fit most applications ...

Adjusts clearance between brake drum and brake shoe Fits through the slot in the backing plate and turns the star wheel Tools vary by angle and...

Removes deposits and corrosion in brake cylinders Use with electric drill Diameter Range: 3/4" - 2-1/2" (19.05mm - 63.5mm) Stone Length: 22mm Med...

To be used with CTA kit # 98141 Includes a set of five (5) - 3/4" inserts Thread Pitch: 1.25 (Metric)

To be used with CTA Kit #98141 3/8" Insert - 5 each

Harden steel tool removes carbon and corrosion and straightens damaged threads Works on both 14mm & 18mm sizes 14mm x 1.25 18mm x 1.5 Tape...

  Locks and holds camshafts when adjusting the left and right camshafts Services: Audi A4, A6 & A8 (2001 – 2008) with AVK engine Includes hold...

For alignment of the cam and crankshafts Enables correct installation of the camshaft with the cam cover Applications Make Model Year V...

Includes: Yoke 71/2” (19cm) center screw - 5/8" x 18 TPI (OAL: 7.5") Flat & Pointed adapter tips 4 bolt sizes: (3) M8 x 1.25 x 80mm (2) 3/8...

Disconnect fuel, transmission, oil cooler, and A/C lines Tools are flexible injection-molded plastic and color-coded Components available individu...

Anodized metal design for strength and durability Use tapered side of tool against the locking clip. Applications: 2006 – 2011 BMW 3 series 2006 ...

Separate the hydrocarbon injection quick connect Offset design for improved access and easy use Services: 2010 & up diesel engines, includi...

Use with CTA #7400 ATF Filling Adapter VW, Audi Will work on most "Non-CTA" ATF Filling System Tanks

For quick and safe removal of all standard radiator caps Offset design for easy clearance Comfort Grip Handles

For pressurizing Cooling Systems All metal construction For vehicles with small, deep necks Use with CTA #7050 Pressure Tester Compatible with ot...

For pressurizing Cooling Systems All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with oth...