Products Not On Sale

For fast overhead valve repairs without removing cylinder head Fit 14 & 18mm spark plug holes Accepts 1/4" air hose coupling

Primes the lubricating system of new and rebuilt engines, sending oil to the internal moving parts before the first start Use with 3/8" o...

Removes shellacked gaskets, paint, grease and carbon 1" wide forged alloy steel blade with chisel edge Can be re-sharpened OAL: 9-3/4" (25cm)

Installs piston rings from 27/8 to 43/8" (73-111mm) Includes ratcheting pliers and 6 sizes of 11/2" wide compressor bands Works either parallel or...

Includes 2-1/2" (65mm) diameter with dual calibration (0-300 PSI / 0-21kg/cm²) 6' / 1.8m hose and SAE & Metric adapters ATTENTION - If ga...

For hard-to-reach valves, straight-on chuck with 30 degree reverse angle 1/4" female NPT 5/8" hex "14"" Straight On Chuck" Maximum Pressure 1...

Extra-long gauge reaches inside and outside wheels Built for use in heavy-duty environments Two-sided nylon indicator bar is dual calibrated from ...

No. 3 Phillips bit w/ 5/16" hex shank assembled to a 3/8" square drive bit holder Works on high-torque applications such as Honda Brake Rotors ...

For relining rear disc brakes by rotating pistons back into brake calipers when replacing pads 5 drive pin configurations fit most applications ...

Adjusts clearance between brake drum and brake shoe Fits through the slot in the backing plate and turns the star wheel Tools vary by angle and...

Removes deposits and corrosion in brake cylinders Use with electric drill Diameter Range: 3/4" - 2-1/2" (19.05mm - 63.5mm) Stone Length: 22mm Med...

To be used with CTA kit # 98141 Includes a set of five (5) - 3/4" inserts Thread Pitch: 1.25 (Metric)

To be used with CTA Kit #98141 3/8" Insert - 5 each

To be used with CTA Kit # 2340 14mm Tap & Reamer

Harden steel tool removes carbon and corrosion and straightens damaged threads Works on both 14mm & 18mm sizes 14mm x 1.25 18mm x 1.5 Tape...

  Locks and holds camshafts when adjusting the left and right camshafts Services: Audi A4, A6 & A8 (2001 – 2008) with AVK engine Includes hold...

For alignment of the cam and crankshafts Enables correct installation of the camshaft with the cam cover Applications Make Model Year V...

Includes: Yoke 71/2” (19cm) center screw - 5/8" x 18 TPI (OAL: 7.5") Flat & Pointed adapter tips 4 bolt sizes: (3) M8 x 1.25 x 80mm (2) 3/8...

Removes pressed-on 1 or 2 groove pulleys from alternators and power steering pumps without damage Fits both large and small pulleys found on old...

7/8” (22mm) hex socket with narrow slot for extra strength Combination 3/8" square drive & 1" hex drive Nickel plated

Disconnect fuel, transmission, oil cooler, and A/C lines Tools are flexible injection-molded plastic and color-coded Components available individu...

Separate the hydrocarbon injection quick connect Offset design for improved access and easy use Services: 2010 & up diesel engines, includi...

Remove Fuel, Vacuum or Heater Hoses from 6mm to 15mm diameter Quickly and easily reaches into tight areas to access hose Push pliers between part ...

Use with CTA #7400 ATF Filling Adapter VW, Audi Will work on most "Non-CTA" ATF Filling System Tanks

For quick and safe removal of all standard radiator caps Offset design for easy clearance Comfort Grip Handles

For pressurizing Cooling Systems All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with oth...

High-torque 2-piece bit socket design 1/2" Square Drive Size:17mm

Designed to fit most Oil Drain, Transfer Case and Differential Plugs Features offset head design with yoke support for high torque applications, i...

Thick 2" wide band is assembed to forged handle 3/8" and 1/2" drive ends Range: 9" (229mm) diameter Strap may be red or black

For removal of Oil Filters Three clamping legs to bite into filters Driven by gear mechanism for maximum range Superior gripping Use with 3/8...

Removes the most stubborn filters Adjustable jaws Long handles Range: 45-89mm (13/4" - 31/2")

Chain allows for diamter adjustment and better gripping NOW with extra long (9" / 228mm) chain Range: 70-115mm (2 3/4 - 4 17/32")

Features vinyl grip handle and dimpled band Adjustable size: 83mm - 95mm (39/32 - 33/4")

For hard-to-reach filters Features a swivel design, locking nut, heavy-duty yoke, link mechanism, and comfort grip Band width: 18.5mm Adjustab...

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings 88mm x 15 Flute Interior Diameter 3/8” square drive Black fi...

Precision-stamped to remove Aftermarket and OE spin-on filters and filter housings, including Amsoil #EA15K20 Size: 76mm x 15 Flute Interior Diame...