Products Not On Sale

14mm Offset Socket 3/8" Sq. Dr. Socket is included in kits 5083 & 8857

Magnetic Stand 4 compartments Included in #4325 & #4325T

Slotted Double-D Socket 6 x 8mm

Go-Thru Ratchet - 21mm

7mm Hex Bit x 1/2" Sq. Dr.

Go-Thru Deep Socket - 19mm

Go-Thru Deep Socket - 17mm

For removal of Oil & Fuel Filter Housings and spin-on filters. Includes 6 Cap Wrenches: #A251 - 76mm x 14 Flute #A258 - 74mm x 15 Flute #A2...

Kit combines CTA: 1068 - Crank Bolt Socket - 27mm Use for easily breaking loose crank bolts Counter-weighted design for high torque application...

Brake Bleeding Adapter Pro Series features all metal construction adapter Services Dodge, Chrysler, Jeep & RAM models I.D. = 30mm Adapter has ...

Removes harmonic balancers without tapped holes Services V6 & V8: GM (5.3L, 5.7L 6.0L, 6.2L & 7.0L) Chrysler, Dodge & Jeep (3.5L, 3.7...

Designed for the L5P Diesel engine with two tank caps One cap is located on the side of the tank (Vented) with right-hand threads The other is loc...

Holds flywheel in place when servicing the flywheel bolt and/or balancer Services Cadillac ATS, CTS, Chevy Malibu, Impala & Buick Regal Mount...

Used for pulling the ignition coils off many VW/Audi (VAG) gasoline engines Many of these coil pack boots are prone to damage when removed incorre...

Use to remove and install seals without wear sleeves such as: #3934486, #3926126 & #3925529 Services Cummins 3.5L, 3.9L, 5.9L & 6.7L (198...

Kit is designed to repair glow plug housing threads for a wide range of diesel engines It professionally and permanently replaces the threads on m...

Tool kit is used to install the piston pin circlip on Porsche engines Includes:  5018X05 - Pin Driver & Extension 5018X06 - Alignment tool A...

Vibration Damper Counter Holder for Porsche 970 & 92A Used to counter hold the crankshaft pulley during removal and installation Used for repl...

Comprehensive tool kit services Ford, Lincoln, Land Rover & Mazda 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L & 3.0L engines Used on EcoBoost, Dura...

Sockets are designed to install and remove Exhaust Gas Temperature sensors on cars & trucks without damaging connection wire, housing, sensor ...

For easy access to 10mm hex fasteners found on Hose Clamps and other applications 6" long flexible shaft for working in limited clearance ...

Tool mounts to the front of the block, its tabs engage both cam phasers to be held in place so the phaser bolts may be serviced The ECOTEC engines...

10 Point socket for caliper retaining screws on Porsche Macan, Cayenne, Audi Q7 & S8 models Visit ctatools.com for application details 3/8" sq...

Features 14mm & 16mm 12 point swivel spark plug sockets to access hard to reach spark plugs 15-20° max swivel range 3/8" Square Drive Includes...

Removes frozen or caked injectors without removing the electrical part Services older and late model vehicles, including Denso, Siemens, Bosch and...

Used to align and set the rear camshafts For 1.5 & 1.6L Ecoboost and GTDI engines Use when the VCT (Variable Camshaft Timing) phasers have bee...

Services the left & right head for "High Feature" 2006+ 2.8L, 3.0L & 3.6L V6 GM engines Prevents rotation during timing chain service Ind...

Designed to Service BMW, Ford, Mercedes Benz, MINI, Nissan, Infiniti, Subaru, Toyota, Scion, Volkswagen, Audi, Porsche & more Features a swive...

Services Volvo 850, 940, 940SE, 960, S60, S70, S80, V70, V70XC, XC70 & XC90 Compare to Volvo Factory tool #9995371 Because threads are very fi...

Services Ford vehicles w/ 4.6L, 5.4L & 6.8L 3V engine Compare to Ford Factory Tool 303-1039 Instructions 1. Install 2-leg main body below th...

5/8" x 12 Point Magnetic Thin Wall - 20.2mm / 0.795" OD 3/8" Square Drive OAL: 6" Applications Make Model Year Jeep Grand Cherokee 199...

3 Point Nissan Transmission Pump Socket 1/2" Drive Size: 8TS OAL: 1.5"

120mm long socket for extra-deep reach 3/8" Drive 6 Point 14mm 19.75mm OD (excluding Drive Diameter) Applications: BMW Spark Plugs

120mm long socket for extra-deep reach 3/8" Drive 6 Point 11mm 15.35mm OD (excluding Drive Diameter) Applications: BMW E90/92 Clutch Bleeder Val...

Four-point design securely engages the crankshaft pulley Holds the pulley during center-bolt removal and installation Long handle provides increas...

Counter-weighted design for high torque applications, including: Mercedes Benz (Can be used with CTA 3998 for Benz Applications) Nissan/Infinit...