Products Not On Sale

Used for pulling the ignition coils off many VW/Audi (VAG) gasoline engines Many of these coil pack boots are prone to damage when removed incorre...

Use to remove and install seals without wear sleeves such as: #3934486, #3926126 & #3925529 Services Cummins 3.5L, 3.9L, 5.9L & 6.7L (198...

Press fit front seal to engine block & crankshaft for proper fitment of inner & outer seal body (works w/ 3878) Services GM/ISUZU 6.6L Dur...

Kit is designed to repair glow plug housing threads for a wide range of diesel engines It professionally and permanently replaces the threads on m...

Tool kit is used to install the piston pin circlip on Porsche engines Includes:  5018X05 - Pin Driver & Extension 5018X06 - Alignment tool A...

Vibration Damper Counter Holder for Porsche 970 & 92A Used to counter hold the crankshaft pulley during removal and installation Used for repl...

Kit includes: #3472 Benz Injector Remover. T-bar/Slide hammer designed for easier removal of the injector nozzle. #2213 Mercedes Benz Injector ...

Spline Diameter: 15/16” Metric Spline: 23.825 Spline Count: 23 Pilot Diameter: .820 Metric Pilot: 20.85 Precision tool for accurate alignmen...

Comprehensive tool kit services Ford, Lincoln, Land Rover & Mazda 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L & 3.0L engines Used on EcoBoost, Dura...

Sockets are designed to install and remove Exhaust Gas Temperature sensors on cars & trucks without damaging connection wire, housing, sensor ...

For easy access to 10mm hex fasteners found on Hose Clamps and other applications 6" long flexible shaft for working in limited clearance ...

Tool mounts to the front of the block, its tabs engage both cam phasers to be held in place so the phaser bolts may be serviced The ECOTEC engines...

Tool is used for installing the front Crankshaft Wear Sleeve Note: CTA #5041 is required for installing factory seal #3937111, #3904353 and the se...

Removes and installs center-lock wheel nuts on Porsche 911 Carrera 997, 991 & 992 performance models A torque wrench or torque multiplier tool...

Used for replacing the Teflon fuel injector seals Services: Subaru 2.0L & 2.4L turbo boxer engines (2014-2019) GM 2.0L & 3.6L engines H...

Used for aligning the position of the camshaft pulley T100 x 1/2"Dr. Made of Durable, high quality Carbon Steel Compare to Mercedes Benz Factory T...

Removes frozen or caked injectors without removing the electrical part Services older and late model vehicles, including Denso, Siemens, Bosch and...

Adapter 1/2 Turn Thread Color: Dark Green Included in kit #7333 O.D. of working end: 47.15mm Applications Make Model Year Dodge Durango...

Used to align and set the rear camshafts For 1.5 & 1.6L Ecoboost and GTDI engines Use when the VCT (Variable Camshaft Timing) phasers have bee...

Includes one Fan clutch Wrench: 36mm & Holding Tool: 40mm Services most Mercedes models from Mid-90's and up Also services: Land Rover (Disco...

Locks the flywheel while the transmission is removed for service Applications are M47TU, M54, M57T2, M57TU, N40, N42, N43, N54, N45T, N46, N46T, N...

For repairing the balancer shaft, holding chain sprocket and for removing and installing the oil pump, chain, and sprocket for repair This kit in...

Designed to Service BMW, Ford, Mercedes Benz, MINI, Nissan, Infiniti, Subaru, Toyota, Scion, Volkswagen, Audi, Porsche & more Features a swive...

Used to counter-hold the crankshaft pulley to release and tighten center bolt Compare to Volvo Factory Tool: #999 5433 Application Details ...

5/8" x 12 Point Magnetic Thin Wall - 20.2mm / 0.795" OD 3/8" Square Drive OAL: 6" Applications Make Model Year Jeep Grand Cherokee 199...

3 Point Nissan Transmission Pump Socket 1/2" Drive Size: 8TS OAL: 1.5"

120mm long socket for extra-deep reach 3/8" Drive 6 Point 14mm 19.75mm OD (excluding Drive Diameter) Applications: BMW Spark Plugs

120mm long socket for extra-deep reach 3/8" Drive 6 Point 11mm 15.35mm OD (excluding Drive Diameter) Applications: BMW E90/92 Clutch Bleeder Val...

Counter-weighted design for high torque applications, including: Mercedes Benz (Can be used with CTA 3998 for Benz Applications) Nissan/Infinit...

Use with CTA #7400 Services GM vehicles with 12 x 1.75 threaded end Will work on most "Non-CTA" ATF Filling System Tanks Applicatin...

New Design with off-set Nitto fitting Internal Male Insert O.D. = 37mm I.D. 50.07mm Adapter O.D. = 66.5mm 3 Tab design For use with #7015 Bleeder...

Flex shaft with flip socket heads to service hose clamps, body panels, trim panels, etc. in hard-to-reach areas Size range of Flip Socket head: ...

Kit includes pressure tester connector with 3 adapters to fit almost all cooling systems 3 adapters cover all diameters from 17mm to 40mm Elastome...

Services Camshaft Adjuster (#10 Polydrive) bolts, where clearance is critical Bolts are found at the back of the engine-bay near the firewall 9mm ...

Holds Harmonic Balancer in place when removing or installing center bolt of Ford Taurus Pulley Extension Tool can be used to turn the engine to ga...

For replacing fuel filter or servicing the water sensor without damage Services '01 - '11 6.6L Duramax diesel engines (Aftermarket) 6-...