Products Not On Sale

Kit contains everything required to perform timing service on 4.6L, 5.4L and 6.8L Ford Triton engines This comprehensive kit includes the followin...

Removes and installs water pump pulley on Ford, Lincoln and Mercury 3.0L DOHC engines Includes: Forcing screw with shaft protector Pulley removal...

Separates the lower control arm ball joint from the steering knuckle Services 2005-2018 Ford, Lincoln & Mercury models (Not Limited Too) Extra...

Adapter 1/2 Turn Thread Color: Red Included in kit #7333 O.D. of working end: 35.25mm Applications Make Model Year Cadillac CTS *******...

Tool is used for holding the Crankshaft Damper on 2005-2011 Ford 2.0L, 2.3L & 2.5L engines Applications: Fusion, Focus, Transit, Milan, MKZ, E...

Click here for application chart of clutch tool range Spline Diameter: 15/16" Metric Spline: 23.8125 Spline Count: 10 Pilot Diameter: .625 Metric ...

Use for install of wheel hub oil seal on single or dual wheel axle assemblies Seal installer adapter is driven with the 7" detachable handle Appli...

Comprehensive tool kit services Ford, Lincoln, Land Rover & Mazda 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L & 3.0L engines Used on EcoBoost, Dura...

New Design with off-set Nitto fitting Internal Male Insert O.D. = 37mm I.D. 50.07mm Adapter O.D. = 66.5mm 3 Tab design For use with #7015 Bleeder...

Click here for application chart of clutch tool range Spline Diameter: 1" Metric Spline: 25.4000 Spline Count: 23 Pilot Diameter: .590 Metric Pilo...

For locking and positioning camshafts, crankshafts & injection pump sprockets when replacing timing belts or chains Includes setting gauge and...

Must have adapter for filling/adding fluid to the 5R55W & 5R55S Automatic Transmissions Use with CTA #7400 ATF Filling Tank Can also be used w...

To Test Pressure Relief Valve in Cooling System Cap All metal construction 32mm Use with CTA #7050 Pressure Tester Compatible with other Pressure...

Primarily services Ford 4.0L SOHC V6's And some late model 4.6L V8's 3 pieces with detachable end to enable access in tight areas Compare to Ford ...

Services Ford vehicles w/ 4.6L, 5.4L & 6.8L 3V engine Compare to Ford Factory Tool 303-1039 Instructions 1. Install 2-leg main body below th...

Removes the Pivot Pins found on both tilt and telescopic steering columns Works on GM, Ford, and Chryslers with Saginaw steering columns

12mm & 16mm threaded male ends fit spark plug ports on Ford Triton engines 8-1/2" / 22cm long flex hose for easy accessibility Works with #...

Used to install Harmonic Balancers on V8s and V6s on '04 - current Ford*, '08 - current GM**, & '06-current Chrysler/Dodge*** Reduces risk of...

For pressurizing Cooling Systems All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with oth...

This Funnel kit combines the necessary tools used for servicing GM, Land Rover, Jaguar, & Hyundai Kit Includes: 7471 - Oil Filling Funnel 746...

One tool locks camshaft and the other locks the timing chain Services Ford 4.6L, 5.4L & 6.8L 3V engines Also includes #7639 Ford Valve Spring ...

One tool locks camshaft and the other locks the timing chain Services Ford 4.6L, 5.4L & 6.8L 3V engines Comparable to Ford Factory Tools #5676...

Click here for application chart of clutch tool range Spline Diameter: 15/16" Metric Spline: 23.8125 Spline Count: 22 Pilot Diameter: .590 Metric ...

For removing and installing front hub/axle nuts 1/2" square drive Size: 36mm Point: 6 Applications include, but are not limited to: 2001 Jeep Ch...

For removing and installing front hub/axle nuts 1/2" square drive 27mm X 6 Point

6 Point Hex Magnetic Service Ford Triton V8 and V10 Engines Length: 10" 3/8" square drive

Service Ford Triton V8 and V10 Engines 9/16" hex x 6" long with 3/8" square drive Features swivel extension & special plastic inse...

Service Ford Triton V8 and V10 Engines 2-1/2" long with 3/8" square drive

Primes the lubricating system of new and rebuilt engines, sending oil to the internal moving parts before the first start Use with 3/8" o...

To Test Pressure Relief Valve in Cooling System Cap All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester ...

For pressurizing Cooling Systems All metal construction with 52mm x 2.5mm Buttress Threads Use with CTA #7050 Pressure Tester Compatible with oth...

Safely removes fuel injectors from Ford EcoBoost engines while preventing damage to the injector’s plastic housing ring    Services: 1.0L, 2.3L, ...

Kit includes all metal construction cooling system testing adapters for US & Asian market vehicles Use with CTA 7060 Radiator Pressure Tester ...

Yoke is designed to safely apply torque on the pinion nut Universal bolt placement design with ½” slots will fit the flange bolt centerlines up to...

Comprehensive tool kit services Ford, Lincoln, Land Rover & Mazda 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L & 3.0L engines Used on EcoBoost, Dur...

Holds Harmonic Balancer in place when removing or installing center bolt of Ford Taurus Pulley Extension Tool can be used to turn the engine to ga...