Products Not On Sale

Services GM vehicles with 6L50, 6L80, 6L90, 8L45, 8L90, 10L60, 10L80 & 10L90 Transmissions Use with CTA 7400 Tank, will work on most "Non-CTA"...

"Double-D" socket holds shock piston stem while deep socket is used to remove the nut Internal dimensions: .33"(8mm) long x .25"(6mm) wi...

This tool is designed to remove and install the hub nut on these axles, which is critical to maintaining the proper preload on the axle components...

Removes damaged glow plugs, even when compartment is not easily accessible Easy removal in narrow engine bays and engines with glow plugs on the f...

Remove new, plastic oil drain plugs without damage Mates perfectly with oil drain plug Widened thumb-grip allows proper torque Applications: Acadi...

Services: Transfer cases Engine oil pans, Manual transmission Differential drain plugs Fill plugs Size: 10mm Drive: 3/8" Essential for every ...

Comprehensive "Flip" socket set offering two hex sizes in one socket. Half metric sizes for the removal of inflated, warped and mangled chrome-ca...

Locks flywheel in place when removing harmonic balancer Use on 6.6L Duramax engine with Allison automatic transmission Instead of ha...

GM 1.6 & 1.8L 16V engine Designed to lock the camshafts in their required timing position Ensure proper alignment of the camshafts Packed in b...

Designed for the L5P Diesel engine with two tank caps One cap is located on the side of the tank (Vented) with right-hand threads The other is lo...

Adapter 1/2 Turn Thread Color: Red Included in kit #7333 O.D. of working end: 35.25mm Applications Make Model Year Cadillac CTS *******...

This tool is part of CTA #4380 Spare Tire Tool Kit Use for removal & installation of spare tires mounted under vehicle Working end - Hook H...

Used in conjunction with 7024 to close hole on 2-hole master cylinder Included in 11pc. Master Cylinder Adapter Kit - CTA Part # 7300 I.D. = 43.5m...

Features a 2-1/2-Inch / 63mm-diameter gauge with dual-calibration (0 - 1,000 PIS / 0 - 70kg/cm2) and side-release valve for multiple readings with...

Brake Bleeding Adapter Pro Series features all metal construction adapter Services GM, Tesla Model 3 & Y I.D. = 37mm Adapter has a 90° swivel ...

Press fit rear seal to engine block & crankshaft for proper fitment of inner & outer seal body Services GM/ISUZU 6.6L Duramax 2001-2016 GM...

Designed for GM 10.5” dual rear wheel (DRW) rear axles on 2022+ Chevrolet Express and GMC Savana vans Precisely engages the ProShear nut to ensure...

Brake Bleeding Adapter Pro Series features all metal construction adapter Services GM, Tesla Model S & X I.D. = 36mm Adapter has a 90° swivel ...

Hard-to-find bit-sockets to service "Figure 8" screws on old GM cars, trucks & some non-automotive applications Applications include headlight...

Kit includes #3930 11 Pc. Brake Bleeding Adapter Pro Series and #7015 Pressure Brake Bleeder Tank Pro Series feature all metal construction adapte...

4 Pc master set for extracting broken dipstick tubes on Ford, Dodge, & GM Dipstick tubes are prone to break in these makes and models When the...

Removes broken glow plug tips stuck in the cylinder head. The tap, drill bit and extractor holders are fitted to the body of the original plug and...

Click here for application chart of clutch tool range Spline Diameter: 1 3/4" Metric Spline: 44.4500 Spline Count: 10 Pilot Diameter: 1.180 Metric...

Compresses belt tensioner spring when replacing the engine drive belt and alternator Services GM 2.4L EcoTec (Hybrid) 2011-2016; Buick Regal, LaCr...

Tool holds the camshaft at T.D.C. to ensure proper timing when performing service on timing system components (cams, gears, chains, etc.) Designed...

Applications: For glow testing on GM/Isuzu 1.8L & 2.2L, 6.6 Duramax Diesel, Toyota 1.8L (10mm x 1.25) 2800x04 : OAL: 65.55mm Injector end - th...

Bracket is used to hold a GM 1.5L engine Bracket is installed onto both camshafts, and holds the assembled hex on both cams to maintain their rela...

Extracts broken dipstick tubes, a common issue on GM 4.8L, 5.3L, 5.7L, 6.0L & 6.2L Engines during engine service When the dipstick tube breaks...

Disconnect tool is required to remove the fuel line connector from the fuel filter For GM 5.3L V8 Engine Applications: Avalanche, Tahoe, Silverado...

Pro Series features all metal construction adapters Services most makes and models on the road today, including new EV applications Most adapters ...

Designed to service 17mm lug nuts or Lug Bolts with missing and distorted chrome caps, found on many Dodge, Chrysler, Jeep, Ford, Lincoln, GM,...

Removes harmonic balancers without tapped holes Services V6 & V8: GM (5.3L, 5.7L 6.0L, 6.2L & 7.0L) Chrysler, Dodge & Jeep (3.5L, 3.7...

Used for replacing the Teflon fuel injector seals Services: Subaru 2.0L & 2.4L turbo boxer engines (2014-2019) GM 2.0L & 3.6L engines H...

Removes frozen or caked injectors without removing the electrical part Services older and late model vehicles, including Denso, Siemens, Bosch and...

New Design with off-set Nitto fitting Internal Male Insert O.D. = 37mm I.D. 50.07mm Adapter O.D. = 66.5mm 3 Tab design For use with #7015 Bleeder...

Applications: 9-pin design fits retaining nut on 2WD and 4WD drive Avalanche, Cheyenne, Escalade, Sierra, and Silverado trucks with...