Pressure Testers

Checks for leaky, sticky, or burnt valves, incorrect timing, accurate fuel pump vacuum and pressure and gas line leakage Gauge is calibrated from ...

Features a 2-1/2-Inch / 63mm-diameter gauge with dual-calibration (0 - 1,000 PIS / 0 - 70kg/cm2) and side-release valve for multiple readings with...

The turbo system leakage tester helps locate air leaks in the components by plugging the output side of the turbo and plugging the intake inlet Ai...

Test compression from lawn mowers to trucks Includes 8" (20cm) flex hose with 14 & 18mm threaded end, 10, 12 & 14mm long adapters, straigh...

Locates leaks in turbo, intake and cooling system by plugging the output side of the turbo and intake side Services Heavy Duty class 6, 7 & 8 ...

Measures the ability of an engine cylinder to hold compressed air using shop air pressure and supplements a compression tester Helps detect bad va...

4 adapters allow expansion of applications with CTA #3420 Fuel Injection Pressure Tester Kit CIS "Continuous Injection System" Services wider rang...

Detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters Includes 3-1/2" (90mm) gauge with dual calibration (5-1...

Test vehicles with Multi-port and TBI systems Features 3-1/2" (90mm) gauge with dual calibration (5-145 PSI / 25-1,000 kPa) and 3 hose assemblies ...

15" flex hose allows access to all cylinders Side release valve permits multiple readings without removing tester Includes quick disconnect couple...

15" flex hose allows access to all cylinders Side release valve permits multiple readings without removing tester Includes 14 & 18mm spark plu...

Includes 2-1/2" (65mm) diameter with dual calibration (0-300 PSI / 0-21kg/cm²) 6' / 1.8m hose and SAE & Metric adapters ATTENTION - If ga...

Test Chrysler, Ford, GM (non-TBI), Japanese makes, Bosch AFC, MPC, Digijet/Digifant (non-CIS), plus others using Bendix-type fuel injection or a S...

Detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters Includes 3-1/2" (90mm) gauge with dual calibration (5-1...

Accurately displays the air suspension pressure during service Helps detect leaks and/or irregularities in pressure throughout the air suspension...

Services most USA (except GM TBI) and Japanese systems Contains both large and small Schrader type test fittings, inline and end of line hose fi...

Checks PFI (Port-Fuel-Injected) and TBI (Throttle-Body-Injected) systems on most vehicles Includes 3-1/2" gauge with dual calibrations (5-145 PSI ...

Allows for quick and easy seating in all spark plug holes 2-1/2" (64mm) diamteter gauge with dual calibration (0-300 PSI / 0-21kg/cm²) ATTENTION -...